Context Navigation

source: doc/user-guide/commands.xml @ c8eeadd

Last change on this file since c8eeadd was e907683, checked in by Wilmer van der Gaast <wilmer@…>, at 2010-06-26T23:39:31Z

Changed account set (and other account commands) syntax. Instead of
"account set acc/key value" you now do "account acc set key value". So just
the regular set syntax with a "account acc" prefix. The slash has been a
source of confusion for long enough now.

For consistency, commands like "account on acc" should now also be
"account acc on" instead. Same for the new "channel" comand, of course.

Property mode set to 100644

File size: 46.8 KB

Rev	Line
[b7d3cc34]	1	<chapter id="commands">
	2	<title>Bitlbee commands</title>
	3
	4	<command-list/>
	5
	6	<bitlbee-command name="account">
	7	<short-description>IM-account list maintenance</short-description>
[e907683]	8	<syntax>account [<account id>] <action> [<arguments>]</syntax>
[b7d3cc34]	9
	10	<description>
	11
	12	<para>
[75a4b85]	13	Available actions: add, del, list, on, off and set. See <emphasis>help account <action></emphasis> for more information.
[b7d3cc34]	14	</para>
	15
	16	</description>
	17
	18	<bitlbee-command name="add">
[30ce1ce]	19	<syntax>account add <protocol> <username> <password></syntax>
[b7d3cc34]	20
	21	<description>
	22	<para>
[e88fbe27]	23	Adds an account on the given server with the specified protocol, username and password to the account list. Supported protocols right now are: Jabber, MSN, OSCAR (AIM/ICQ), Yahoo and Twitter. For more information about adding an account, see <emphasis>help account add <protocol></emphasis>.
[b7d3cc34]	24	</para>
	25	</description>
	26
	27	<bitlbee-command name="jabber">
[30ce1ce]	28	<syntax>account add jabber <handle@server.tld> <password></syntax>
[b7d3cc34]	29
	30	<description>
	31	<para>
[ee5c355]	32	The handle should be a full handle, including the domain name. You can specify a servername if necessary. Normally BitlBee doesn't need this though, since it's able to find out the server by doing DNS SRV lookups.
[b7d3cc34]	33	</para>
	34
	35	<para>
[ee5c355]	36	In previous versions it was also possible to specify port numbers and/or SSL in the server tag. This is deprecated and should now be done using the <emphasis>account set</emphasis> command. This also applies to specifying a resource in the handle (like <emphasis>wilmer@bitlbee.org/work</emphasis>).
[b7d3cc34]	37	</para>
	38	</description>
	39	</bitlbee-command>
	40
	41	<bitlbee-command name="msn">
[75a4b85]	42	<syntax>account add msn <handle@server.tld> <password></syntax>
[b7d3cc34]	43
	44	<description>
	45	<para>
	46	For MSN connections there are no special arguments.
	47	</para>
	48	</description>
	49	</bitlbee-command>
	50
	51	<bitlbee-command name="oscar">
[30ce1ce]	52	<syntax>account add oscar <handle> <password></syntax>
[b7d3cc34]	53
	54	<description>
	55	<para>
[30ce1ce]	56	OSCAR is the protocol used to connect to AIM and/or ICQ. The servers will automatically detect if you're using a numeric or non-numeric username so there's no need to tell which network you want to connect to.
[b7d3cc34]	57	</para>
	58	</description>
	59
	60	<ircexample>
[30ce1ce]	61	<ircline nick="wilmer">account add oscar 72696705 hobbelmeeuw</ircline>
[b7d3cc34]	62	<ircline nick="root">Account successfully added</ircline>
	63	</ircexample>
	64	</bitlbee-command>
[7a90d02]	65
	66	<bitlbee-command name="twitter">
	67	<syntax>account add twitter <handle> <password></syntax>
	68
	69	<description>
	70	<para>
	71	This module gives you simple access to Twitter. Although it uses the Twitter API, only Twitter itself is supported at the moment.
	72	</para>
	73
	74	<para>
[e88fbe27]	75	By default all your Twitter contacts will come from a contact called twitter_(yourusername). You can change this behaviour using the <emphasis>mode</emphasis> setting (see <emphasis>help set mode</emphasis>).
[7a90d02]	76	</para>
	77
	78	<para>
[e88fbe27]	79	To send tweets yourself, send them to the twitter_(yourusername) contact, or just write in the groupchat channel if you enabled that option.
[7a90d02]	80	</para>
[3f668e47]	81
	82	<para>
	83	Since Twitter now requires OAuth authentication, you should not enter your Twitter password into BitlBee. Just type a bogus password. The first time you log in, BitlBee will start OAuth authentication. (See <emphasis>help set oauth</emphasis>.)
[7a90d02]	84	</para>
	85	</description>
	86	</bitlbee-command>
[b7d3cc34]	87
	88	<bitlbee-command name="yahoo">
	89	<syntax>account add yahoo <handle> <password></syntax>
	90
	91	<description>
	92	<para>
	93	For Yahoo! connections there are no special arguments.
	94	</para>
	95	</description>
	96	</bitlbee-command>
	97
	98	</bitlbee-command>
	99
	100	<bitlbee-command name="del">
[e907683]	101	<syntax>account <account id> del</syntax>
[b7d3cc34]	102
	103	<description>
	104	<para>
	105	This commands deletes an account from your account list. You should signoff the account before deleting it.
	106	</para>
	107
	108
	109	<para>
	110	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	111	</para>
	112	</description>
	113	</bitlbee-command>
	114
	115	<bitlbee-command name="on">
[e907683]	116	<syntax>account [<account id>] on</syntax>
[b7d3cc34]	117
	118	<description>
	119	<para>
[75a4b85]	120	This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set.
[b7d3cc34]	121	</para>
	122
	123	<para>
	124	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	125	</para>
	126	</description>
	127
	128	</bitlbee-command>
	129
	130	<bitlbee-command name="off">
[e907683]	131	<syntax>account [<account id>] off</syntax>
[b7d3cc34]	132
	133	<description>
	134	<para>
[75a4b85]	135	This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects.
[b7d3cc34]	136	</para>
	137
	138	<para>
	139	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	140	</para>
	141	</description>
	142	</bitlbee-command>
	143
	144	<bitlbee-command name="list">
	145	<syntax>account list</syntax>
	146
	147	<description>
	148	<para>
[c1333754]	149	This command gives you a list of all the accounts known by BitlBee.
[b7d3cc34]	150	</para>
	151	</description>
	152	</bitlbee-command>
[75a4b85]	153
	154	<bitlbee-command name="set">
[e907683]	155	<syntax>account <account id> set</syntax>
	156	<syntax>account <account id> set <setting></syntax>
	157	<syntax>account <account id> set <setting> <value></syntax>
	158	<syntax>account <account id> set -del <setting></syntax>
[75a4b85]	159
	160	<description>
	161	<para>
[c1333754]	162	This command can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing <emphasis>account set <account id></emphasis>.
[75a4b85]	163	</para>
	164
	165	<para>
[c1333754]	166	For more infomation about a setting, see <emphasis>help set <setting></emphasis>.
[75a4b85]	167	</para>
	168
	169	<para>
	170	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	171	</para>
	172	</description>
	173	</bitlbee-command>
[b7d3cc34]	174	</bitlbee-command>
	175
[c1333754]	176	<bitlbee-command name="chat">
	177	<short-description>Chatroom list maintenance</short-description>
	178	<syntax>chat <action> [<arguments>]</syntax>
	179
	180	<description>
	181
	182	<para>
[e907683]	183	Available actions: add, with. See <emphasis>help chat <action></emphasis> for more information.
[c1333754]	184	</para>
	185
	186	</description>
	187
	188	<bitlbee-command name="add">
	189	<syntax>chat add <account> <room> [<channel>]</syntax>
	190
	191	<description>
	192	<para>
	193	Add a chatroom to the list of chatrooms you're interested in. BitlBee needs this list to map room names to a proper IRC channel name.
	194	</para>
	195
	196	<para>
	197	After adding a room to your list, you can simply use the IRC /join command to enter the room. Also, you can tell BitlBee to automatically join the room when you log in. (See <emphasis>chat set</emphasis>)
	198	</para>
[57d8421]	199
	200	<para>
	201	Password-protected rooms work exactly like on IRC, by passing the password as an extra argument to /join.
	202	</para>
[c1333754]	203	</description>
	204
	205	</bitlbee-command>
	206
	207	<bitlbee-command name="with">
	208	<syntax>chat with <nickname></syntax>
	209
	210	<description>
	211	<para>
	212	While most <emphasis>chat</emphasis> subcommands are about named chatrooms, this command can be used to open an unnamed groupchat with one or more persons. This command is what <emphasis>/join #nickname</emphasis> used to do in older BitlBee versions.
	213	</para>
	214	</description>
	215	</bitlbee-command>
	216	</bitlbee-command>
	217
[b7d3cc34]	218	<bitlbee-command name="add">
	219	<short-description>Add a buddy to your contact list</short-description>
	220	<syntax>add <connection> <handle> [<nick>]</syntax>
[ea3a26d]	221	<syntax>add -tmp <connection> <handle> [<nick>]</syntax>
[b7d3cc34]	222
	223	<description>
	224	<para>
	225	Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	226	</para>
	227
	228	<para>
[b27557b]	229	If you want, you can also tell BitlBee what nick to give the new contact. The -tmp option adds the buddy to the internal BitlBee structures only, not to the real contact list (like done by <emphasis>set handle_unknown add</emphasis>). This allows you to talk to people who are not in your contact list. This normally won't show you any presence notifications.
[ea3a26d]	230	</para>
[b7d3cc34]	231	</description>
	232
	233	<ircexample>
	234	<ircline nick="ctrlsoft">add 3 gryp@jabber.org grijp</ircline>
[689a6e0]	235	<ircaction nick="grijp" hostmask="gryp@jabber.org">has joined <emphasis>&bitlbee</emphasis></ircaction>
[b7d3cc34]	236	</ircexample>
	237	</bitlbee-command>
	238
	239	<bitlbee-command name="info">
	240	<short-description>Request user information</short-description>
	241	<syntax>info <connection> <handle></syntax>
	242	<syntax>info <nick></syntax>
	243
	244	<description>
	245	<para>
	246	Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols (ATM Yahoo! and MSN) it'll give you an URL which you can visit with a normal web browser to get the information.
	247	</para>
	248	</description>
	249
	250	<ircexample>
	251	<ircline nick="ctrlsoft">info 0 72696705</ircline>
	252	<ircline nick="root">User info - UIN: 72696705 Nick: Lintux First/Last name: Wilmer van der Gaast E-mail: lintux@lintux.cx</ircline>
	253	</ircexample>
	254
	255	</bitlbee-command>
	256
	257	<bitlbee-command name="remove">
	258	<short-description>Remove a buddy from your contact list</short-description>
	259	<syntax>remove <nick></syntax>
	260
	261	<description>
	262	<para>
	263	Removes the specified nick from your buddy list.
	264	</para>
	265	</description>
	266
	267	<ircexample>
	268	<ircline nick="ctrlsoft">remove gryp</ircline>
	269	<ircaction nick="gryp" hostmask="gryp@jabber.jabber.org">has quit <emphasis>[Leaving...]</emphasis></ircaction>
	270	</ircexample>
	271
	272	</bitlbee-command>
	273
	274	<bitlbee-command name="block">
	275	<short-description>Block someone</short-description>
	276	<syntax>block <nick></syntax>
	277	<syntax>block <connection> <handle></syntax>
[9b8efab]	278	<syntax>block <connection></syntax>
[b7d3cc34]	279
	280	<description>
	281	<para>
	282	Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
	283	</para>
[9b8efab]	284
	285	<para>
	286	When called with only a connection specification as an argument, the command displays the current block list for that connection.
	287	</para>
[b7d3cc34]	288	</description>
	289	</bitlbee-command>
	290
	291	<bitlbee-command name="allow">
	292	<short-description>Unblock someone</short-description>
	293	<syntax>allow <nick></syntax>
	294	<syntax>allow <connection> <handle></syntax>
	295
	296	<description>
	297	<para>
	298	Reverse of block. Unignores the specified user or user handle on specified connection.
	299	</para>
[9b8efab]	300
	301	<para>
	302	When called with only a connection specification as an argument, the command displays the current allow list for that connection.
	303	</para>
[b7d3cc34]	304	</description>
	305	</bitlbee-command>
	306
	307	<bitlbee-command name="set">
	308	<short-description>Miscellaneous settings</short-description>
[cd428e4]	309	<syntax>set</syntax>
	310	<syntax>set <variable></syntax>
	311	<syntax>set <variable> <value></syntax>
	312	<syntax>set -del <variable></syntax>
[b7d3cc34]	313
	314	<description>
	315
	316	<para>
[cd428e4]	317	Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument. With <emphasis>-del</emphasis> you can reset a setting to its default value.
[b7d3cc34]	318	</para>
	319
	320	<para>
	321	To get more help information about a setting, try:
	322	</para>
	323
	324	</description>
	325
	326	<ircexample>
	327	<ircline nick="ctrlsoft">help set private</ircline>
	328	</ircexample>
	329
	330	</bitlbee-command>
	331
	332	<bitlbee-command name="help">
	333	<short-description>BitlBee help system</short-description>
	334
	335	<syntax>help [subject]</syntax>
	336
	337	<description>
	338	<para>
	339	This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
	340	</para>
	341	</description>
	342	</bitlbee-command>
	343
	344	<bitlbee-command name="save">
	345	<short-description>Save your account data</short-description>
	346	<syntax>save</syntax>
	347
	348	<description>
	349	<para>
	350	This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
	351	</para>
	352	</description>
	353	</bitlbee-command>
	354
[89a1809]	355	<bitlbee-setting name="auto_connect" type="boolean" scope="both">
	356	<default>true</default>
[b7d3cc34]	357
	358	<description>
	359	<para>
[75a4b85]	360	With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
[b7d3cc34]	361	</para>
[75a4b85]	362
[b7d3cc34]	363	<para>
[75a4b85]	364	This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_connect</emphasis> setting is disabled!)
[b7d3cc34]	365	</para>
	366	</description>
	367	</bitlbee-setting>
	368
[c1333754]	369	<bitlbee-setting name="auto_join" type="boolean" scope="chat">
	370	<default>false</default>
	371
	372	<description>
	373	<para>
	374	With this option enabled, BitlBee will automatically join this chatroom when you log in.
	375	</para>
	376	</description>
	377	</bitlbee-setting>
	378
[89a1809]	379	<bitlbee-setting name="auto_reconnect" type="boolean" scope="both">
[7a90d02]	380	<default>true</default>
[b7d3cc34]	381
	382	<description>
	383	<para>
[75a4b85]	384	If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
[b7d3cc34]	385	</para>
	386
	387	<para>
[75a4b85]	388	See also the <emphasis>auto_reconnect_delay</emphasis> setting.
[b7d3cc34]	389	</para>
[75a4b85]	390
[89a1809]	391	<para>
	392	This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_reconnect</emphasis> setting is disabled!)
	393	</para>
	394	</description>
[b7d3cc34]	395	</bitlbee-setting>
	396
[4230221]	397	<bitlbee-setting name="auto_reconnect_delay" type="string" scope="global">
	398	<default>5*3<900</default>
[b7d3cc34]	399
	400	<description>
	401	<para>
[4230221]	402	Tell BitlBee after how many seconds it should attempt to bring a broken IM-connection back up.
	403	</para>
	404
	405	<para>
	406	This can be one integer, for a constant delay. One can also set it to something like "10*10", which means wait for ten seconds on the first reconnect, multiply it by ten on every failure. Once successfully connected, this delay is re-set to the initial value. With < you can give a maximum delay.
[75a4b85]	407	</para>
	408
	409	<para>
	410	See also the <emphasis>auto_reconnect</emphasis> setting.
[b7d3cc34]	411	</para>
	412	</description>
	413	</bitlbee-setting>
	414
[0e99548]	415	<bitlbee-setting name="away" type="string" scope="both">
	416	<description>
	417	<para>
	418	To mark yourself as away, it is recommended to just use <emphasis>/away</emphasis>, like on normal IRC networks. If you want to mark yourself as away on only one IM network, you can use this per-account setting.
	419	</para>
	420
	421	<para>
	422	You can set it to any value and BitlBee will try to map it to the most appropriate away state for every open IM connection, or set it as a free-form away message where possible.
	423	</para>
	424
	425	<para>
	426	Any per-account away setting will override globally set away states. To un-set the setting, use <emphasis>set -del away</emphasis>.
	427	</para>
	428	</description>
	429	</bitlbee-setting>
	430
[89a1809]	431	<bitlbee-setting name="away_devoice" type="boolean" scope="global">
	432	<default>true</default>
[b7d3cc34]	433
	434	<description>
	435	<para>
[75a4b85]	436	With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
[b7d3cc34]	437	</para>
	438	</description>
	439	</bitlbee-setting>
	440
[1c8e5f7]	441	<bitlbee-setting name="away_reply_timeout" type="integer" scope="global">
	442	<default>3600</default>
	443
	444	<description>
	445	<para>
	446	Most IRC servers send a user's away message every time s/he gets a private message, to inform the sender that they may not get a response immediately. With this setting set to 0, BitlBee will also behave like this.
	447	</para>
	448
	449	<para>
	450	Since not all IRC clients do an excellent job at suppressing these messages, this setting lets BitlBee do it instead. BitlBee will wait this many seconds (or until the away state/message changes) before re-informing you that the person's away.
	451	</para>
	452	</description>
	453	</bitlbee-setting>
	454
[89a1809]	455	<bitlbee-setting name="charset" type="string" scope="global">
[b27557b]	456	<default>utf-8</default>
[75a4b85]	457	<possible-values>you can get a list of all possible values by doing 'iconv -l' in a shell</possible-values>
[b7d3cc34]	458
	459	<description>
	460	<para>
[b27557b]	461	This setting tells BitlBee what your IRC client sends and expects. It should be equal to the charset setting of your IRC client if you want to be able to send and receive non-ASCII text properly.
[75a4b85]	462	</para>
	463
	464	<para>
[b27557b]	465	Most systems use UTF-8 these days. On older systems, an iso8859 charset may work better. For example, iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://www.unicodecharacter.com/charsets/iso8859.html
[b7d3cc34]	466	</para>
	467	</description>
[75a4b85]	468
[b7d3cc34]	469	</bitlbee-setting>
	470
[0baed0d]	471	<bitlbee-setting name="control_channel" type="string" scope="global">
	472	<default>&bitlbee</default>
	473
	474	<description>
	475	<para>
	476	Normally the control channel where you can see all your contacts is called "&bitlbee". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
	477	</para>
	478	</description>
	479	</bitlbee-setting>
	480
[89a1809]	481	<bitlbee-setting name="debug" type="boolean" scope="global">
	482	<default>false</default>
[b7d3cc34]	483
	484	<description>
	485	<para>
[75a4b85]	486	Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
[b7d3cc34]	487	</para>
[75a4b85]	488	</description>
	489	</bitlbee-setting>
	490
[89a1809]	491	<bitlbee-setting name="default_target" type="string" scope="global">
[75a4b85]	492	<default>root</default>
	493	<possible-values>root, last</possible-values>
[b7d3cc34]	494
[75a4b85]	495	<description>
[b7d3cc34]	496	<para>
[75a4b85]	497	With this value set to <emphasis>root</emphasis>, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to <emphasis>last</emphasis>.
[b7d3cc34]	498	</para>
	499	</description>
	500	</bitlbee-setting>
	501
[89a1809]	502	<bitlbee-setting name="display_name" type="string" scope="account">
[b7d3cc34]	503	<description>
	504	<para>
[75a4b85]	505	Currently only available for MSN connections. This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line.
[b7d3cc34]	506	</para>
	507	</description>
	508	</bitlbee-setting>
	509
[89a1809]	510	<bitlbee-setting name="display_namechanges" type="boolean" scope="global">
	511	<default>false</default>
[75a4b85]	512
[2529faf]	513	<description>
	514	<para>
	515	With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name".
	516	</para>
	517	</description>
[75a4b85]	518	</bitlbee-setting>
	519
[5b9b2b6]	520	<bitlbee-setting name="display_timestamps" type="boolean" scope="global">
	521	<default>true</default>
	522
	523	<description>
	524	<para>
	525	When incoming messages are old (i.e. offline messages and channel backlogs), BitlBee will prepend them with a timestamp. If you find them ugly or useless, you can use this setting to hide them.
	526	</para>
	527	</description>
	528	</bitlbee-setting>
	529
[89a1809]	530	<bitlbee-setting name="handle_unknown" type="string" scope="global">
[16834a5]	531	<default>add_channel</default>
[b7d3cc34]	532	<possible-values>root, add, add_private, add_channel, ignore</possible-values>
	533
	534	<description>
	535	<para>
	536	Messages from unknown users are echoed like this by default:
	537	</para>
	538
	539	<ircexample>
	540	<ircline nick="root">Unknown message from handle 3137137:</ircline>
	541	<ircline nick="root">j0000! 1 4m l33t h4x0r! kill me!</ircline>
	542	</ircexample>
	543
	544	<para>
	545	If you want this lame user to be added automatically, you can set this setting to "add". If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
	546	</para>
	547
	548	<note>
	549	<para>
	550	Auto-added users aren't added to your real contact list. This is because you don't want the user to get authorization requests. So when you restart BitlBee, the auto-added user will be gone. If you want to keep the person in your buddy-list, you have to fixate the add using the <emphasis>add</emphasis> command.
	551	</para>
	552	</note>
	553	</description>
	554
	555	</bitlbee-setting>
	556
[545d7c0]	557	<bitlbee-setting name="ignore_auth_requests" type="boolean" scope="account">
[f9110b4]	558	<default>false</default>
[545d7c0]	559
	560	<description>
	561	<para>
	562	Only supported by OSCAR so far, you can use this setting to ignore ICQ authorization requests, which are hardly used for legitimate (i.e. non-spam) reasons anymore.
	563	</para>
	564	</description>
	565
	566	</bitlbee-setting>
	567
[89a1809]	568	<bitlbee-setting name="lcnicks" type="boolean" scope="global">
	569	<default>true</default>
[b7d3cc34]	570
	571	<description>
	572	<para>
[75a4b85]	573	Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer.
[b7d3cc34]	574	</para>
	575	</description>
[75a4b85]	576
[b7d3cc34]	577	</bitlbee-setting>
	578
[e3413cc]	579	<bitlbee-setting name="local_display_name" type="boolean" scope="account">
	580	<default>false</default>
	581
	582	<description>
	583	<para>
	584	Mostly meant to work around a bug in MSN servers (forgetting the display name set by the user), this setting tells BitlBee to store your display name locally and set this name on the MSN servers when connecting.
	585	</para>
	586	</description>
	587
	588	</bitlbee-setting>
	589
[1febf5c]	590	<bitlbee-setting name="mail_notifications" type="boolean" scope="account">
	591	<default>false</default>
	592
	593	<description>
	594	<para>
	595	Some protocols (MSN, Yahoo!) can notify via IM about new e-mail. Since most people use their Hotmail/Yahoo! addresses as a spam-box, this is disabled default. If you want these notifications, you can enable this setting.
	596	</para>
	597	</description>
	598
	599	</bitlbee-setting>
	600
[9997691]	601	<bitlbee-setting name="message_length" type="integer" scope="account">
	602	<default>140</default>
	603
	604	<description>
	605	<para>
	606	Since Twitter rejects messages longer than 140 characters, BitlBee can count message length and emit a warning instead of waiting for Twitter to reject it.
	607	</para>
	608
	609	<para>
	610	You can change this limit here but this won't disable length checks on Twitter's side. You can also set it to 0 to disable the check in case you believe BitlBee doesn't count the characters correctly.
	611	</para>
	612	</description>
	613
	614	</bitlbee-setting>
	615
[e88fbe27]	616	<bitlbee-setting name="mode" type="string" scope="account">
	617	<possible-values>one, many, chat</possible-values>
	618	<default>one</default>
	619
	620	<description>
	621	<para>
	622	By default, everything from the Twitter module will come from one nick, twitter_(yourusername). If you prefer to have individual nicks for everyone, you can set this setting to "many" instead.
	623	</para>
	624
	625	<para>
	626	If you prefer to have all your Twitter things in a separate channel, you can set this setting to "chat".
	627	</para>
	628
	629	<para>
	630	In the last two modes, you can send direct messages by /msg'ing your contacts directly. Note, however, that incoming DMs are not fetched yet.
	631	</para>
	632	</description>
	633
	634	</bitlbee-setting>
	635
[c1333754]	636	<bitlbee-setting name="nick" type="string" scope="chat">
	637
	638	<description>
	639	<para>
	640	You can use this option to set your nickname in a chatroom. You won't see this nickname yourself, but other people in the room will. By default, BitlBee will use your username as the chatroom nickname.
	641	</para>
	642	</description>
	643	</bitlbee-setting>
	644
[286b28e]	645	<bitlbee-setting name="nick_source" type="string" scope="account">
	646	<default>handle</default>
	647	<possible-values>handle, full_name, first_name</possible-values>
	648
	649	<description>
	650	<para>
	651	By default, BitlBee generates a nickname for every contact by taking its handle and chopping off everything after the @. In some cases, this gives very inconvenient nicknames. The Facebook XMPP server is a good example, as all Facebook XMPP handles are numeric.
	652	</para>
	653
	654	<para>
	655	With this setting set to <emphasis>full_name</emphasis>, the person's full name is used to generate a nickname. Or if you don't like long nicknames, set this setting to <emphasis>first_name</emphasis> instead and only the first word will be used. Note that the full name can be full of non-ASCII characters which will be stripped off.
	656	</para>
	657	</description>
	658	</bitlbee-setting>
	659
[3f668e47]	660	<bitlbee-setting name="oauth" type="boolean" scope="account">
	661	<default>true</default>
	662
	663	<description>
	664	<para>
	665	This enables OAuth authentication for Twitter accounts. From June 2010 this will be mandatory.
	666	</para>
	667
	668	<para>
	669	With OAuth enabled, you shouldn't tell BitlBee your Twitter password. Just add your account with a bogus password and type <emphasis>account on</emphasis>. BitlBee will then give you a URL to authenticate with Twitter. If this succeeds, Twitter will return a PIN code which you can give back to BitlBee to finish the process.
	670	</para>
	671
	672	<para>
	673	The resulting access token will be saved permanently, so you have to do this only once.
	674	</para>
	675	</description>
	676
	677	</bitlbee-setting>
	678
[89a1809]	679	<bitlbee-setting name="ops" type="string" scope="global">
[75a4b85]	680	<default>both</default>
	681	<possible-values>both, root, user, none</possible-values>
[b7d3cc34]	682
	683	<description>
	684	<para>
[75a4b85]	685	Some people prefer themself and root to have operator status in &bitlbee, other people don't. You can change these states using this setting.
[b7d3cc34]	686	</para>
	687
	688	<para>
[75a4b85]	689	The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
[b7d3cc34]	690	</para>
	691	</description>
	692	</bitlbee-setting>
	693
[89a1809]	694	<bitlbee-setting name="password" type="string" scope="both">
[b7d3cc34]	695	<description>
	696	<para>
[75a4b85]	697	Use this global setting to change your "NickServ" password.
[b7d3cc34]	698	</para>
[75a4b85]	699
[b7d3cc34]	700	<para>
[75a4b85]	701	This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service.
	702	</para>
	703
	704	<para>
	705	Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text.
[b7d3cc34]	706	</para>
	707	</description>
	708	</bitlbee-setting>
[e5b521d]	709
	710	<bitlbee-setting name="paste_buffer" type="boolean" scope="global">
	711	<default>false</default>
	712
	713	<description>
	714	<para>
	715	By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
	716	</para>
	717
	718	<para>
	719	Using the <emphasis>paste_buffer_delay</emphasis> setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
	720	</para>
	721
	722	<para>
	723	Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
	724	</para>
	725	</description>
	726	</bitlbee-setting>
	727
	728	<bitlbee-setting name="paste_buffer_delay" type="integer" scope="global">
	729	<default>200</default>
	730
	731	<description>
	732
	733	<para>
	734	Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds.
	735	</para>
	736
	737	<para>
	738	See also the <emphasis>paste_buffer</emphasis> setting.
	739	</para>
	740	</description>
	741	</bitlbee-setting>
[75a4b85]	742
[89a1809]	743	<bitlbee-setting name="port" type="integer" scope="account">
[b7d3cc34]	744	<description>
	745	<para>
[75a4b85]	746	Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections.
[b7d3cc34]	747	</para>
[75a4b85]	748	</description>
	749	</bitlbee-setting>
	750
[ee5c355]	751	<bitlbee-setting name="priority" type="integer" scope="account">
	752	<default>0</default>
	753
	754	<description>
	755	<para>
	756	Can be set for Jabber connections. When connecting to one account from multiple places, this priority value will help the server to determine where to deliver incoming messages (that aren't addressed to a specific resource already).
	757	</para>
	758
	759	<para>
	760	According to RFC 3921 servers will always deliver messages to the server with the highest priority value. Mmessages will not be delivered to resources with a negative priority setting (and should be saved as an off-line message if all available resources have a negative priority value).
	761	</para>
	762	</description>
	763	</bitlbee-setting>
	764
[89a1809]	765	<bitlbee-setting name="private" type="boolean" scope="global">
	766	<default>true</default>
[b7d3cc34]	767
[75a4b85]	768	<description>
[b7d3cc34]	769	<para>
[75a4b85]	770	If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel.
[b7d3cc34]	771	</para>
	772
	773	<para>
[75a4b85]	774	This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
[b7d3cc34]	775	</para>
	776	</description>
	777	</bitlbee-setting>
	778
[89a1809]	779	<bitlbee-setting name="query_order" type="string" scope="global">
[75a4b85]	780	<default>lifo</default>
	781	<possible-values>lifo, fifo</possible-values>
[834ff44]	782
[b7d3cc34]	783	<description>
	784	<para>
[75a4b85]	785	This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to <emphasis>lifo</emphasis>, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to <emphasis>fifo</emphasis>, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
[b7d3cc34]	786	</para>
	787
	788	<para>
[75a4b85]	789	Although the <emphasis>fifo</emphasis> setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
[b7d3cc34]	790	</para>
	791	</description>
[75a4b85]	792	</bitlbee-setting>
[b7d3cc34]	793
[89a1809]	794	<bitlbee-setting name="resource" type="string" scope="account">
[75a4b85]	795	<default>BitlBee</default>
	796
	797	<description>
	798	<para>
	799	Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string.
	800	</para>
	801	</description>
[b7d3cc34]	802	</bitlbee-setting>
	803
[ee5c355]	804	<bitlbee-setting name="resource_select" type="string" scope="account">
[f9928cb]	805	<default>activity</default>
[9e768da]	806	<possible-values>priority, activity</possible-values>
[ee5c355]	807
	808	<description>
	809	<para>
	810	Because the IRC interface makes it pretty hard to specify the resource to talk to (when a buddy is online through different resources), this setting was added.
	811	</para>
	812
	813	<para>
[9e768da]	814	Normally it's set to <emphasis>priority</emphasis> which means messages will always be delivered to the buddy's resource with the highest priority. If the setting is set to <emphasis>activity</emphasis>, messages will be delivered to the resource that was last used to send you a message (or the resource that most recently connected).
[ee5c355]	815	</para>
	816	</description>
	817	</bitlbee-setting>
	818
[1195cec]	819	<bitlbee-setting name="root_nick" type="string" scope="global">
	820	<default>root</default>
	821
	822	<description>
	823	<para>
	824	Normally the "bot" that takes all your BitlBee commands is called "root". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
	825	</para>
	826	</description>
	827	</bitlbee-setting>
	828
[89a1809]	829	<bitlbee-setting name="save_on_quit" type="boolean" scope="global">
	830	<default>true</default>
[b7d3cc34]	831
	832	<description>
	833	<para>
[75a4b85]	834	If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
[b7d3cc34]	835	</para>
	836	</description>
[75a4b85]	837	</bitlbee-setting>
[b7d3cc34]	838
[89a1809]	839	<bitlbee-setting name="server" type="string" scope="account">
[75a4b85]	840	<description>
	841	<para>
[30ce1ce]	842	Can be set for Jabber- and OSCAR-connections. For Jabber, you might have to set this if the servername isn't equal to the part after the @ in the Jabber handle. For OSCAR this shouldn't be necessary anymore in recent BitlBee versions.
[75a4b85]	843	</para>
	844	</description>
[b7d3cc34]	845	</bitlbee-setting>
[1186382]	846
[839189b]	847	<bitlbee-setting name="show_offline" type="boolean" scope="global">
[6824fb3]	848	<default>false</default>
[839189b]	849
	850	<description>
	851	<para>
	852	If enabled causes BitlBee to also show offline users in Channel. Online-users will get op, away-users voice and offline users none of both. This option takes effect as soon as you reconnect.
	853	</para>
	854	</description>
	855	</bitlbee-setting>
	856
[1186382]	857	<bitlbee-setting name="simulate_netsplit" type="boolean" scope="global">
	858	<default>true</default>
	859
	860	<description>
	861	<para>
	862	Some IRC clients parse quit messages sent by the IRC server to see if someone really left or just disappeared because of a netsplit. By default, BitlBee tries to simulate netsplit-like quit messages to keep the control channel window clean. If you don't like this (or if your IRC client doesn't support this) you can disable this setting.
	863	</para>
	864	</description>
	865	</bitlbee-setting>
[b7d3cc34]	866
[89a1809]	867	<bitlbee-setting name="ssl" type="boolean" scope="account">
	868	<default>false</default>
[b7d3cc34]	869
[75a4b85]	870	<description>
	871	<para>
	872	Currently only available for Jabber connections. Set this to true if the server accepts SSL connections.
	873	</para>
	874	</description>
[b7d3cc34]	875	</bitlbee-setting>
	876
[0e99548]	877	<bitlbee-setting name="status" type="string" scope="both">
	878	<description>
	879	<para>
	880	Certain protocols (like Jabber/XMPP) support status messages, similar to away messages. They can be used to indicate things like your location or activity, without showing up as away/busy.
	881	</para>
	882
	883	<para>
	884	This setting can be used to set such a message. It will be available as a per-account setting for protocols that support it, and also as a global setting (which will then automatically be used for all protocols that support it).
	885	</para>
	886
	887	<para>
	888	Away states set using <emphasis>/away</emphasis> or the <emphasis>away</emphasis> setting will override this setting. To un-set the setting, use <emphasis>set -del status</emphasis>.
	889	</para>
	890	</description>
	891	</bitlbee-setting>
	892
[89a1809]	893	<bitlbee-setting name="strip_html" type="boolean" scope="global">
	894	<default>true</default>
[75a4b85]	895
[b7d3cc34]	896	<description>
	897	<para>
[75a4b85]	898	Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML.
	899	</para>
	900	<para>
	901	If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to <emphasis>always</emphasis>, but this might sometimes accidentally strip non-HTML things too.
[b7d3cc34]	902	</para>
	903	</description>
	904	</bitlbee-setting>
	905
[0f84234]	906	<bitlbee-setting name="switchboard_keepalives" type="boolean" scope="account">
	907	<default>false</default>
	908
	909	<description>
	910	<para>
	911	Turn on this flag if you have difficulties talking to offline/invisible contacts.
	912	</para>
	913
	914	<para>
	915	With this setting enabled, BitlBee will send keepalives to MSN switchboards with offline/invisible contacts every twenty seconds. This should keep the server and client on the other side from shutting it down.
	916	</para>
	917
	918	<para>
	919	This is useful because BitlBee doesn't support MSN offline messages yet and the MSN servers won't let the user reopen switchboards to offline users. Once offline messaging is supported, this flag might be removed.
	920	</para>
	921	</description>
	922	</bitlbee-setting>
	923
[3e57660]	924	<bitlbee-setting name="timezone" type="string" scope="global">
	925	<default>local</default>
	926	<possible-values>local, utc, gmt, timezone-spec</possible-values>
	927
	928	<description>
	929	<para>
	930	If message timestamps are available for offline messages or chatroom backlogs, BitlBee will display them as part of the message. By default it will use the local timezone. If you're not in the same timezone as the BitlBee server, you can adjust the timestamps using this setting.
	931	</para>
	932
	933	<para>
	934	Values local/utc/gmt should be self-explanatory. timezone-spec is a time offset in hours:minutes, for example: -8 for Pacific Standard Time, +2 for Central European Summer Time, +5:30 for Indian Standard Time.
	935	</para>
	936	</description>
	937	</bitlbee-setting>
	938
[ee5c355]	939	<bitlbee-setting name="tls" type="boolean" scope="account">
	940	<default>try</default>
	941
	942	<description>
	943	<para>
	944	Newer Jabber servers allow clients to convert a plain-text session to a TLS/SSL-encrypted session. Normally (with this setting set to <emphasis>try</emphasis>) BitlBee will do this, if possible.
	945	</para>
	946
	947	<para>
	948	If you want to force BitlBee to use TLS sessions only (and to give up if that doesn't seem to be possible) you can set this setting to <emphasis>true</emphasis>. Set it to <emphasis>false</emphasis> if you want the session to remain plain-text.
	949	</para>
	950	</description>
	951	</bitlbee-setting>
	952
[89a1809]	953	<bitlbee-setting name="to_char" type="string" scope="global">
[75a4b85]	954	<default>": "</default>
[b7d3cc34]	955
	956	<description>
	957	<para>
[75a4b85]	958	It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using <emphasis>set to_char</emphasis>.
[b7d3cc34]	959	</para>
	960
	961	<para>
[75a4b85]	962	Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
[b7d3cc34]	963	</para>
	964	</description>
	965	</bitlbee-setting>
	966
[89a1809]	967	<bitlbee-setting name="typing_notice" type="boolean" scope="global">
	968	<default>false</default>
[b7d3cc34]	969
	970	<description>
	971	<para>
[b27557b]	972	Sends you a /notice when a user starts typing a message (if supported by the IM protocol and the user's client). To use this, you most likely want to use a script in your IRC client to show this information in a more sensible way.
[b7d3cc34]	973	</para>
	974	</description>
	975	</bitlbee-setting>
	976
[4eef271]	977	<bitlbee-setting name="user_agent" type="string" scope="account">
	978	<default>BitlBee</default>
	979
	980	<description>
	981	<para>
	982	Some Jabber servers are configured to only allow a few (or even just one) kinds of XMPP clients to connect to them.
	983	</para>
	984
	985	<para>
	986	You can change this setting to make BitlBee present itself as a different client, so that you can still connect to these servers.
	987	</para>
	988	</description>
	989	</bitlbee-setting>
	990
[846cec61]	991	<bitlbee-setting name="web_aware" type="string" scope="account">
	992	<default>false</default>
	993
	994	<description>
	995	<para>
	996	ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default.
	997	</para>
	998
	999	<para>
	1000	Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled.
	1001	</para>
	1002	</description>
	1003	</bitlbee-setting>
	1004
[a6df0b5]	1005	<bitlbee-setting name="xmlconsole" type="boolean" scope="account">
	1006	<default>false</default>
	1007
	1008	<description>
	1009	<para>
	1010	The Jabber module allows you to add a buddy <emphasis>xmlconsole</emphasis> to your contact list, which will then show you the raw XMPP stream between you and the server. You can also send XMPP packets to this buddy, which will then be sent to the server.
	1011	</para>
	1012	<para>
	1013	If you want to enable this XML console permanently (and at login time already), you can set this setting.
	1014	</para>
	1015	</description>
	1016	</bitlbee-setting>
	1017
[b7d3cc34]	1018	<bitlbee-command name="rename">
	1019	<short-description>Rename (renick) a buddy</short-description>
	1020	<syntax>rename <oldnick> <newnick></syntax>
	1021
	1022	<description>
	1023	<para>
	1024	Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
	1025	</para>
	1026	</description>
	1027
	1028	<ircexample>
	1029	<ircline nick="itsme">rename itsme_ you</ircline>
	1030	<ircaction nick="itsme_">is now known as <emphasis>you</emphasis></ircaction>
	1031	</ircexample>
	1032
	1033	</bitlbee-command>
	1034
	1035	<bitlbee-command name="yes">
	1036	<short-description>Accept a request</short-description>
	1037	<syntax>yes [<number>]</syntax>
	1038
	1039	<description>
	1040	<para>
	1041	Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the <emphasis>yes</emphasis> command.
	1042	</para>
	1043
	1044	<para>
	1045	By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
	1046	</para>
	1047	</description>
	1048
	1049	</bitlbee-command>
	1050
	1051	<bitlbee-command name="no">
	1052	<short-description>Deny a request</short-description>
	1053	<syntax>no [<number>]</syntax>
	1054
	1055	<description>
	1056	<para>
	1057	Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the <emphasis>no</emphasis> command.
	1058	</para>
	1059
	1060	<para>
	1061	By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
	1062	</para>
	1063	</description>
	1064	</bitlbee-command>
	1065
	1066	<bitlbee-command name="qlist">
	1067	<short-description>List all the unanswered questions root asked</short-description>
	1068	<syntax>qlist</syntax>
	1069
	1070	<description>
	1071	<para>
	1072	This gives you a list of all the unanswered questions from root.
	1073	</para>
	1074	</description>
	1075
	1076	</bitlbee-command>
	1077
	1078	<bitlbee-command name="register">
	1079	<short-description>Register yourself</short-description>
	1080	<syntax>register <password></syntax>
	1081
	1082	<description>
	1083	<para>
	1084	BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the <emphasis>register</emphasis> command.
	1085	</para>
	1086
	1087	<para>
	1088	Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
	1089	</para>
	1090
	1091	<para>
[1be54a9]	1092	To identify yourself in later sessions, you can use the <emphasis>identify</emphasis> command. To change your password later, you can use the <emphasis>set password</emphasis> command.
[b7d3cc34]	1093	</para>
	1094	</description>
	1095
	1096	</bitlbee-command>
	1097
	1098	<bitlbee-command name="identify">
[92cb8c4]	1099	<syntax>identify [-noload\|-force] <password></syntax>
[b7d3cc34]	1100	<short-description>Identify yourself with your password</short-description>
	1101
	1102	<description>
	1103	<para>
	1104	BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the <emphasis>register</emphasis> command.
	1105	</para>
	1106
	1107	<para>
	1108	Once you're registered, you can change your password using <emphasis>set password <password></emphasis>.
	1109	</para>
[92cb8c4]	1110
	1111	<para>
	1112	The <emphasis>-noload</emphasis> and <emphasis>-force</emphasis> flags can be used to identify when you're logged into some IM accounts already. <emphasis>-force</emphasis> will let you identify yourself and load all saved accounts (and keep the accounts you're logged into already).
	1113	</para>
	1114
	1115	<para>
	1116	<emphasis>-noload</emphasis> will log you in but not load any accounts and settings saved under your current nickname. These will be overwritten once you save your settings (i.e. when you disconnect).
	1117	</para>
[b7d3cc34]	1118	</description>
	1119	</bitlbee-command>
	1120
	1121	<bitlbee-command name="drop">
	1122	<syntax>drop <password></syntax>
	1123	<short-description>Drop your account</short-description>
	1124
	1125	<description>
	1126	<para>
	1127	Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
	1128	</para>
	1129	</description>
	1130	</bitlbee-command>
	1131
	1132	<bitlbee-command name="blist">
	1133	<syntax>blist [all\|online\|offline\|away]</syntax>
	1134	<short-description>List all the buddies in your contact list</short-description>
	1135
	1136	<description>
	1137	<para>
	1138	You can get a better readable buddy list using the <emphasis>blist</emphasis> command. If you want a complete list (including the offline users) you can use the <emphasis>all</emphasis> argument.
	1139	</para>
	1140	</description>
	1141
	1142	</bitlbee-command>
	1143
	1144	<bitlbee-command name="nick">
	1145	<short-description>Change friendly name, nick</short-description>
	1146	<syntax>nick <connection> [<new nick>]</syntax>
[b27557b]	1147	<syntax>nick <connection></syntax>
[b7d3cc34]	1148
	1149	<description>
	1150	<para>
[b27557b]	1151	Deprecated: Use the per-account <emphasis>display_name</emphasis> setting to read and change this information.
[0aaca60]	1152	</para>
[b7d3cc34]	1153	</description>
	1154
	1155	<ircexample>
[d5bd9c0]	1156	<ircline nick="wouter">account set 1/display_name "The majestik møøse"</ircline>
	1157	<ircline nick="root">display_name = `The majestik møøse'</ircline>
[b7d3cc34]	1158	</ircexample>
	1159
	1160	</bitlbee-command>
[2ff2076]	1161
	1162	<bitlbee-command name="transfers">
	1163	<short-description>Monitor, cancel, or reject file transfers</short-description>
	1164	<syntax>transfers [<cancel> id \| <reject>]</syntax>
	1165
	1166	<description>
	1167	<para>
	1168	Without parameters the currently pending file transfers and their status will be listed. Available actions are <emphasis>cancel</emphasis> and <emphasis>reject</emphasis>. See <emphasis>help transfers <action></emphasis> for more information.
	1169	</para>
	1170
	1171	<ircexample>
	1172	<ircline nick="ulim">transfers</ircline>
	1173	</ircexample>
	1174	</description>
	1175
	1176	<bitlbee-command name="cancel">
	1177	<short-description>Cancels the file transfer with the given id</short-description>
	1178	<syntax>transfers <cancel> id</syntax>
	1179
	1180	<description>
	1181	<para>Cancels the file transfer with the given id</para>
	1182	</description>
	1183
	1184	<ircexample>
	1185	<ircline nick="ulim">transfers cancel 1</ircline>
	1186	<ircline nick="root">Canceling file transfer for test</ircline>
	1187	</ircexample>
	1188	</bitlbee-command>
	1189
	1190	<bitlbee-command name="reject">
	1191	<short-description>Rejects all incoming transfers</short-description>
	1192	<syntax>transfers <reject></syntax>
	1193
	1194	<description>
	1195	<para>Rejects all incoming (not already transferring) file transfers. Since you probably have only one incoming transfer at a time, no id is neccessary. Or is it?</para>
	1196	</description>
	1197
	1198	<ircexample>
	1199	<ircline nick="ulim">transfers reject</ircline>
	1200	</ircexample>
	1201	</bitlbee-command>
	1202	</bitlbee-command>
	1203
[b7d3cc34]	1204	</chapter>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: