Context Navigation

source: doc/user-guide/commands.xml @ 389f7be

Last change on this file since 389f7be was 9e768da, checked in by Wilmer van der Gaast <wilmer@…>, at 2009-01-13T18:59:28Z
Fixed an embarassing typo that even fooled me into believing BitlBee is broken. :-(
Property mode set to `100644`
File size: 36.2 KB

Rev	Line
[b7d3cc34]	1	<chapter id="commands">
	2	<title>Bitlbee commands</title>
	3
	4	<command-list/>
	5
	6	<bitlbee-command name="account">
	7	<short-description>IM-account list maintenance</short-description>
	8	<syntax>account <action> [<arguments>]</syntax>
	9
	10	<description>
	11
	12	<para>
[75a4b85]	13	Available actions: add, del, list, on, off and set. See <emphasis>help account <action></emphasis> for more information.
[b7d3cc34]	14	</para>
	15
	16	</description>
	17
	18	<bitlbee-command name="add">
[30ce1ce]	19	<syntax>account add <protocol> <username> <password></syntax>
[b7d3cc34]	20
	21	<description>
	22	<para>
	23	Adds an account on the given server with the specified protocol, username and password to the account list. Supported protocols right now are: Jabber, MSN, OSCAR (AIM/ICQ) and Yahoo. For more information about adding an account, see <emphasis>help account add <protocol></emphasis>.
	24	</para>
	25	</description>
	26
	27	<bitlbee-command name="jabber">
[30ce1ce]	28	<syntax>account add jabber <handle@server.tld> <password></syntax>
[b7d3cc34]	29
	30	<description>
	31	<para>
[ee5c355]	32	The handle should be a full handle, including the domain name. You can specify a servername if necessary. Normally BitlBee doesn't need this though, since it's able to find out the server by doing DNS SRV lookups.
[b7d3cc34]	33	</para>
	34
	35	<para>
[ee5c355]	36	In previous versions it was also possible to specify port numbers and/or SSL in the server tag. This is deprecated and should now be done using the <emphasis>account set</emphasis> command. This also applies to specifying a resource in the handle (like <emphasis>wilmer@bitlbee.org/work</emphasis>).
[b7d3cc34]	37	</para>
	38	</description>
	39	</bitlbee-command>
	40
	41	<bitlbee-command name="msn">
[75a4b85]	42	<syntax>account add msn <handle@server.tld> <password></syntax>
[b7d3cc34]	43
	44	<description>
	45	<para>
	46	For MSN connections there are no special arguments.
	47	</para>
	48	</description>
	49	</bitlbee-command>
	50
	51	<bitlbee-command name="oscar">
[30ce1ce]	52	<syntax>account add oscar <handle> <password></syntax>
[b7d3cc34]	53
	54	<description>
	55	<para>
[30ce1ce]	56	OSCAR is the protocol used to connect to AIM and/or ICQ. The servers will automatically detect if you're using a numeric or non-numeric username so there's no need to tell which network you want to connect to.
[b7d3cc34]	57	</para>
	58	</description>
	59
	60	<ircexample>
[30ce1ce]	61	<ircline nick="wilmer">account add oscar 72696705 hobbelmeeuw</ircline>
[b7d3cc34]	62	<ircline nick="root">Account successfully added</ircline>
	63	</ircexample>
	64	</bitlbee-command>
	65
	66	<bitlbee-command name="yahoo">
	67	<syntax>account add yahoo <handle> <password></syntax>
	68
	69	<description>
	70	<para>
	71	For Yahoo! connections there are no special arguments.
	72	</para>
	73	</description>
	74	</bitlbee-command>
	75
	76	</bitlbee-command>
	77
	78	<bitlbee-command name="del">
	79	<syntax>account del <account id></syntax>
	80
	81	<description>
	82	<para>
	83	This commands deletes an account from your account list. You should signoff the account before deleting it.
	84	</para>
	85
	86
	87	<para>
	88	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	89	</para>
	90	</description>
	91	</bitlbee-command>
	92
	93	<bitlbee-command name="on">
	94	<syntax>account on [<account id>]</syntax>
	95
	96	<description>
	97	<para>
[75a4b85]	98	This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set.
[b7d3cc34]	99	</para>
	100
	101	<para>
	102	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	103	</para>
	104	</description>
	105
	106	</bitlbee-command>
	107
	108	<bitlbee-command name="off">
	109	<syntax>account off [<account id>]</syntax>
	110
	111	<description>
	112	<para>
[75a4b85]	113	This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects.
[b7d3cc34]	114	</para>
	115
	116	<para>
	117	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	118	</para>
	119	</description>
	120	</bitlbee-command>
	121
	122	<bitlbee-command name="list">
	123	<syntax>account list</syntax>
	124
	125	<description>
	126	<para>
[c1333754]	127	This command gives you a list of all the accounts known by BitlBee.
[b7d3cc34]	128	</para>
	129	</description>
	130	</bitlbee-command>
[75a4b85]	131
	132	<bitlbee-command name="set">
	133	<syntax>account set <account id></syntax>
	134	<syntax>account set <account id>/<setting></syntax>
	135	<syntax>account set <account id>/<setting> <value></syntax>
[cd428e4]	136	<syntax>account set -del <account id>/<setting></syntax>
[75a4b85]	137
	138	<description>
	139	<para>
[c1333754]	140	This command can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing <emphasis>account set <account id></emphasis>.
[75a4b85]	141	</para>
	142
	143	<para>
[c1333754]	144	For more infomation about a setting, see <emphasis>help set <setting></emphasis>.
[75a4b85]	145	</para>
	146
	147	<para>
	148	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	149	</para>
	150	</description>
	151	</bitlbee-command>
[b7d3cc34]	152	</bitlbee-command>
	153
[c1333754]	154	<bitlbee-command name="chat">
	155	<short-description>Chatroom list maintenance</short-description>
	156	<syntax>chat <action> [<arguments>]</syntax>
	157
	158	<description>
	159
	160	<para>
	161	Available actions: add, del, list, with and set. See <emphasis>help chat <action></emphasis> for more information.
	162	</para>
	163
	164	</description>
	165
	166	<bitlbee-command name="add">
	167	<syntax>chat add <account> <room> [<channel>]</syntax>
	168
	169	<description>
	170	<para>
	171	Add a chatroom to the list of chatrooms you're interested in. BitlBee needs this list to map room names to a proper IRC channel name.
	172	</para>
	173
	174	<para>
	175	After adding a room to your list, you can simply use the IRC /join command to enter the room. Also, you can tell BitlBee to automatically join the room when you log in. (See <emphasis>chat set</emphasis>)
	176	</para>
	177	</description>
	178
	179	</bitlbee-command>
	180
	181	<bitlbee-command name="del">
	182	<syntax>chat del <chat id></syntax>
	183
	184	<description>
	185	<para>
	186	This commands deletes an chatroom from your list.
	187	</para>
	188
	189	<para>
	190	The room ID can be a number (see <emphasis>chat list</emphasis>), or (part of) the name of the room/channel.
	191	</para>
	192	</description>
	193	</bitlbee-command>
	194
	195	<bitlbee-command name="list">
	196	<syntax>chat list</syntax>
	197
	198	<description>
	199	<para>
	200	This command gives you a list of all the chatrooms known by BitlBee.
	201	</para>
	202	</description>
	203	</bitlbee-command>
	204
	205	<bitlbee-command name="with">
	206	<syntax>chat with <nickname></syntax>
	207
	208	<description>
	209	<para>
	210	While most <emphasis>chat</emphasis> subcommands are about named chatrooms, this command can be used to open an unnamed groupchat with one or more persons. This command is what <emphasis>/join #nickname</emphasis> used to do in older BitlBee versions.
	211	</para>
	212	</description>
	213	</bitlbee-command>
	214
	215	<bitlbee-command name="set">
	216	<syntax>chat set <chat id></syntax>
	217	<syntax>chat set <chat id>/<setting></syntax>
	218	<syntax>chat set <chat id>/<setting> <value></syntax>
	219	<syntax>chat set -del <chat id>/<setting></syntax>
	220
	221	<description>
	222	<para>
	223	This command can be used to change various settings for chatrooms.
	224	</para>
	225
	226	<para>
	227	For more infomation about a setting, see <emphasis>help set <setting></emphasis>.
	228	</para>
	229
	230	<para>
	231	The room ID can be a number (see <emphasis>chat list</emphasis>), or (part of) the name of the room/channel.
	232	</para>
	233	</description>
	234	</bitlbee-command>
	235	</bitlbee-command>
	236
[b7d3cc34]	237	<bitlbee-command name="add">
	238	<short-description>Add a buddy to your contact list</short-description>
	239	<syntax>add <connection> <handle> [<nick>]</syntax>
[ea3a26d]	240	<syntax>add -tmp <connection> <handle> [<nick>]</syntax>
[b7d3cc34]	241
	242	<description>
	243	<para>
	244	Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
	245	</para>
	246
	247	<para>
[b27557b]	248	If you want, you can also tell BitlBee what nick to give the new contact. The -tmp option adds the buddy to the internal BitlBee structures only, not to the real contact list (like done by <emphasis>set handle_unknown add</emphasis>). This allows you to talk to people who are not in your contact list. This normally won't show you any presence notifications.
[ea3a26d]	249	</para>
[b7d3cc34]	250	</description>
	251
	252	<ircexample>
	253	<ircline nick="ctrlsoft">add 3 gryp@jabber.org grijp</ircline>
[689a6e0]	254	<ircaction nick="grijp" hostmask="gryp@jabber.org">has joined <emphasis>&bitlbee</emphasis></ircaction>
[b7d3cc34]	255	</ircexample>
	256	</bitlbee-command>
	257
	258	<bitlbee-command name="info">
	259	<short-description>Request user information</short-description>
	260	<syntax>info <connection> <handle></syntax>
	261	<syntax>info <nick></syntax>
	262
	263	<description>
	264	<para>
	265	Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols (ATM Yahoo! and MSN) it'll give you an URL which you can visit with a normal web browser to get the information.
	266	</para>
	267	</description>
	268
	269	<ircexample>
	270	<ircline nick="ctrlsoft">info 0 72696705</ircline>
	271	<ircline nick="root">User info - UIN: 72696705 Nick: Lintux First/Last name: Wilmer van der Gaast E-mail: lintux@lintux.cx</ircline>
	272	</ircexample>
	273
	274	</bitlbee-command>
	275
	276	<bitlbee-command name="remove">
	277	<short-description>Remove a buddy from your contact list</short-description>
	278	<syntax>remove <nick></syntax>
	279
	280	<description>
	281	<para>
	282	Removes the specified nick from your buddy list.
	283	</para>
	284	</description>
	285
	286	<ircexample>
	287	<ircline nick="ctrlsoft">remove gryp</ircline>
	288	<ircaction nick="gryp" hostmask="gryp@jabber.jabber.org">has quit <emphasis>[Leaving...]</emphasis></ircaction>
	289	</ircexample>
	290
	291	</bitlbee-command>
	292
	293	<bitlbee-command name="block">
	294	<short-description>Block someone</short-description>
	295	<syntax>block <nick></syntax>
	296	<syntax>block <connection> <handle></syntax>
[9b8efab]	297	<syntax>block <connection></syntax>
[b7d3cc34]	298
	299	<description>
	300	<para>
	301	Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
	302	</para>
[9b8efab]	303
	304	<para>
	305	When called with only a connection specification as an argument, the command displays the current block list for that connection.
	306	</para>
[b7d3cc34]	307	</description>
	308	</bitlbee-command>
	309
	310	<bitlbee-command name="allow">
	311	<short-description>Unblock someone</short-description>
	312	<syntax>allow <nick></syntax>
	313	<syntax>allow <connection> <handle></syntax>
	314
	315	<description>
	316	<para>
	317	Reverse of block. Unignores the specified user or user handle on specified connection.
	318	</para>
[9b8efab]	319
	320	<para>
	321	When called with only a connection specification as an argument, the command displays the current allow list for that connection.
	322	</para>
[b7d3cc34]	323	</description>
	324	</bitlbee-command>
	325
	326	<bitlbee-command name="set">
	327	<short-description>Miscellaneous settings</short-description>
[cd428e4]	328	<syntax>set</syntax>
	329	<syntax>set <variable></syntax>
	330	<syntax>set <variable> <value></syntax>
	331	<syntax>set -del <variable></syntax>
[b7d3cc34]	332
	333	<description>
	334
	335	<para>
[cd428e4]	336	Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument. With <emphasis>-del</emphasis> you can reset a setting to its default value.
[b7d3cc34]	337	</para>
	338
	339	<para>
	340	To get more help information about a setting, try:
	341	</para>
	342
	343	</description>
	344
	345	<ircexample>
	346	<ircline nick="ctrlsoft">help set private</ircline>
	347	</ircexample>
	348
	349	</bitlbee-command>
	350
	351	<bitlbee-command name="help">
	352	<short-description>BitlBee help system</short-description>
	353
	354	<syntax>help [subject]</syntax>
	355
	356	<description>
	357	<para>
	358	This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
	359	</para>
	360	</description>
	361	</bitlbee-command>
	362
	363	<bitlbee-command name="save">
	364	<short-description>Save your account data</short-description>
	365	<syntax>save</syntax>
	366
	367	<description>
	368	<para>
	369	This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
	370	</para>
	371	</description>
	372	</bitlbee-command>
	373
[89a1809]	374	<bitlbee-setting name="auto_connect" type="boolean" scope="both">
	375	<default>true</default>
[b7d3cc34]	376
	377	<description>
	378	<para>
[75a4b85]	379	With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
[b7d3cc34]	380	</para>
[75a4b85]	381
[b7d3cc34]	382	<para>
[75a4b85]	383	This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_connect</emphasis> setting is disabled!)
[b7d3cc34]	384	</para>
	385	</description>
	386	</bitlbee-setting>
	387
[c1333754]	388	<bitlbee-setting name="auto_join" type="boolean" scope="chat">
	389	<default>false</default>
	390
	391	<description>
	392	<para>
	393	With this option enabled, BitlBee will automatically join this chatroom when you log in.
	394	</para>
	395	</description>
	396	</bitlbee-setting>
	397
[89a1809]	398	<bitlbee-setting name="auto_reconnect" type="boolean" scope="both">
	399	<default>false</default>
[b7d3cc34]	400
	401	<description>
	402	<para>
[75a4b85]	403	If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
[b7d3cc34]	404	</para>
	405
	406	<para>
[75a4b85]	407	See also the <emphasis>auto_reconnect_delay</emphasis> setting.
[b7d3cc34]	408	</para>
[75a4b85]	409
[89a1809]	410	<para>
	411	This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_reconnect</emphasis> setting is disabled!)
	412	</para>
	413	</description>
[b7d3cc34]	414	</bitlbee-setting>
	415
[4230221]	416	<bitlbee-setting name="auto_reconnect_delay" type="string" scope="global">
	417	<default>5*3<900</default>
[b7d3cc34]	418
	419	<description>
	420	<para>
[4230221]	421	Tell BitlBee after how many seconds it should attempt to bring a broken IM-connection back up.
	422	</para>
	423
	424	<para>
	425	This can be one integer, for a constant delay. One can also set it to something like "10*10", which means wait for ten seconds on the first reconnect, multiply it by ten on every failure. Once successfully connected, this delay is re-set to the initial value. With < you can give a maximum delay.
[75a4b85]	426	</para>
	427
	428	<para>
	429	See also the <emphasis>auto_reconnect</emphasis> setting.
[b7d3cc34]	430	</para>
	431	</description>
	432	</bitlbee-setting>
	433
[89a1809]	434	<bitlbee-setting name="away_devoice" type="boolean" scope="global">
	435	<default>true</default>
[b7d3cc34]	436
	437	<description>
	438	<para>
[75a4b85]	439	With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
[b7d3cc34]	440	</para>
	441	</description>
	442	</bitlbee-setting>
	443
[89a1809]	444	<bitlbee-setting name="buddy_sendbuffer" type="boolean" scope="global">
	445	<default>false</default>
[b7d3cc34]	446
	447	<description>
	448	<para>
[75a4b85]	449	By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
	450	</para>
	451
	452	<para>
	453	Using the <emphasis>buddy_sendbuffer_delay</emphasis> setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
	454	</para>
	455
	456	<para>
	457	Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
[b7d3cc34]	458	</para>
	459	</description>
	460	</bitlbee-setting>
	461
[89a1809]	462	<bitlbee-setting name="buddy_sendbuffer_delay" type="integer" scope="global">
[75a4b85]	463	<default>200</default>
[b7d3cc34]	464
	465	<description>
	466
	467	<para>
[75a4b85]	468	Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds.
[b7d3cc34]	469	</para>
	470
	471	<para>
[75a4b85]	472	See also the <emphasis>buddy_sendbuffer</emphasis> setting.
[b7d3cc34]	473	</para>
	474	</description>
	475	</bitlbee-setting>
	476
[89a1809]	477	<bitlbee-setting name="charset" type="string" scope="global">
[b27557b]	478	<default>utf-8</default>
[75a4b85]	479	<possible-values>you can get a list of all possible values by doing 'iconv -l' in a shell</possible-values>
[b7d3cc34]	480
	481	<description>
	482	<para>
[b27557b]	483	This setting tells BitlBee what your IRC client sends and expects. It should be equal to the charset setting of your IRC client if you want to be able to send and receive non-ASCII text properly.
[75a4b85]	484	</para>
	485
	486	<para>
[b27557b]	487	Most systems use UTF-8 these days. On older systems, an iso8859 charset may work better. For example, iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://www.unicodecharacter.com/charsets/iso8859.html
[b7d3cc34]	488	</para>
	489	</description>
[75a4b85]	490
[b7d3cc34]	491	</bitlbee-setting>
	492
[89a1809]	493	<bitlbee-setting name="debug" type="boolean" scope="global">
	494	<default>false</default>
[b7d3cc34]	495
	496	<description>
	497	<para>
[75a4b85]	498	Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
[b7d3cc34]	499	</para>
[75a4b85]	500	</description>
	501	</bitlbee-setting>
	502
[89a1809]	503	<bitlbee-setting name="default_target" type="string" scope="global">
[75a4b85]	504	<default>root</default>
	505	<possible-values>root, last</possible-values>
[b7d3cc34]	506
[75a4b85]	507	<description>
[b7d3cc34]	508	<para>
[75a4b85]	509	With this value set to <emphasis>root</emphasis>, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to <emphasis>last</emphasis>.
[b7d3cc34]	510	</para>
	511	</description>
	512	</bitlbee-setting>
	513
[89a1809]	514	<bitlbee-setting name="display_name" type="string" scope="account">
[b7d3cc34]	515	<description>
	516	<para>
[75a4b85]	517	Currently only available for MSN connections. This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line.
[b7d3cc34]	518	</para>
	519	</description>
	520	</bitlbee-setting>
	521
[89a1809]	522	<bitlbee-setting name="display_namechanges" type="boolean" scope="global">
	523	<default>false</default>
[75a4b85]	524
[2529faf]	525	<description>
	526	<para>
	527	With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name".
	528	</para>
	529	</description>
[75a4b85]	530	</bitlbee-setting>
	531
[89a1809]	532	<bitlbee-setting name="handle_unknown" type="string" scope="global">
[b7d3cc34]	533	<default>root</default>
	534	<possible-values>root, add, add_private, add_channel, ignore</possible-values>
	535
	536	<description>
	537	<para>
	538	Messages from unknown users are echoed like this by default:
	539	</para>
	540
	541	<ircexample>
	542	<ircline nick="root">Unknown message from handle 3137137:</ircline>
	543	<ircline nick="root">j0000! 1 4m l33t h4x0r! kill me!</ircline>
	544	</ircexample>
	545
	546	<para>
	547	If you want this lame user to be added automatically, you can set this setting to "add". If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
	548	</para>
	549
	550	<note>
	551	<para>
	552	Auto-added users aren't added to your real contact list. This is because you don't want the user to get authorization requests. So when you restart BitlBee, the auto-added user will be gone. If you want to keep the person in your buddy-list, you have to fixate the add using the <emphasis>add</emphasis> command.
	553	</para>
	554	</note>
	555	</description>
	556
	557	</bitlbee-setting>
	558
[89a1809]	559	<bitlbee-setting name="lcnicks" type="boolean" scope="global">
	560	<default>true</default>
[b7d3cc34]	561
	562	<description>
	563	<para>
[75a4b85]	564	Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer.
[b7d3cc34]	565	</para>
	566	</description>
[75a4b85]	567
[b7d3cc34]	568	</bitlbee-setting>
	569
[1febf5c]	570	<bitlbee-setting name="mail_notifications" type="boolean" scope="account">
	571	<default>false</default>
	572
	573	<description>
	574	<para>
	575	Some protocols (MSN, Yahoo!) can notify via IM about new e-mail. Since most people use their Hotmail/Yahoo! addresses as a spam-box, this is disabled default. If you want these notifications, you can enable this setting.
	576	</para>
	577	</description>
	578
	579	</bitlbee-setting>
	580
[c1333754]	581	<bitlbee-setting name="nick" type="string" scope="chat">
	582
	583	<description>
	584	<para>
	585	You can use this option to set your nickname in a chatroom. You won't see this nickname yourself, but other people in the room will. By default, BitlBee will use your username as the chatroom nickname.
	586	</para>
	587	</description>
	588	</bitlbee-setting>
	589
[89a1809]	590	<bitlbee-setting name="ops" type="string" scope="global">
[75a4b85]	591	<default>both</default>
	592	<possible-values>both, root, user, none</possible-values>
[b7d3cc34]	593
	594	<description>
	595	<para>
[75a4b85]	596	Some people prefer themself and root to have operator status in &bitlbee, other people don't. You can change these states using this setting.
[b7d3cc34]	597	</para>
	598
	599	<para>
[75a4b85]	600	The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
[b7d3cc34]	601	</para>
	602	</description>
	603	</bitlbee-setting>
	604
[89a1809]	605	<bitlbee-setting name="password" type="string" scope="both">
[b7d3cc34]	606	<description>
	607	<para>
[75a4b85]	608	Use this global setting to change your "NickServ" password.
[b7d3cc34]	609	</para>
[75a4b85]	610
[b7d3cc34]	611	<para>
[75a4b85]	612	This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service.
	613	</para>
	614
	615	<para>
	616	Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text.
[b7d3cc34]	617	</para>
	618	</description>
	619	</bitlbee-setting>
[75a4b85]	620
[89a1809]	621	<bitlbee-setting name="port" type="integer" scope="account">
[b7d3cc34]	622	<description>
	623	<para>
[75a4b85]	624	Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections.
[b7d3cc34]	625	</para>
[75a4b85]	626	</description>
	627	</bitlbee-setting>
	628
[ee5c355]	629	<bitlbee-setting name="priority" type="integer" scope="account">
	630	<default>0</default>
	631
	632	<description>
	633	<para>
	634	Can be set for Jabber connections. When connecting to one account from multiple places, this priority value will help the server to determine where to deliver incoming messages (that aren't addressed to a specific resource already).
	635	</para>
	636
	637	<para>
	638	According to RFC 3921 servers will always deliver messages to the server with the highest priority value. Mmessages will not be delivered to resources with a negative priority setting (and should be saved as an off-line message if all available resources have a negative priority value).
	639	</para>
	640	</description>
	641	</bitlbee-setting>
	642
[89a1809]	643	<bitlbee-setting name="private" type="boolean" scope="global">
	644	<default>true</default>
[b7d3cc34]	645
[75a4b85]	646	<description>
[b7d3cc34]	647	<para>
[75a4b85]	648	If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel.
[b7d3cc34]	649	</para>
	650
	651	<para>
[75a4b85]	652	This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
[b7d3cc34]	653	</para>
	654	</description>
	655	</bitlbee-setting>
	656
[89a1809]	657	<bitlbee-setting name="query_order" type="string" scope="global">
[75a4b85]	658	<default>lifo</default>
	659	<possible-values>lifo, fifo</possible-values>
[834ff44]	660
[b7d3cc34]	661	<description>
	662	<para>
[75a4b85]	663	This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to <emphasis>lifo</emphasis>, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to <emphasis>fifo</emphasis>, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
[b7d3cc34]	664	</para>
	665
	666	<para>
[75a4b85]	667	Although the <emphasis>fifo</emphasis> setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
[b7d3cc34]	668	</para>
	669	</description>
[75a4b85]	670	</bitlbee-setting>
[b7d3cc34]	671
[89a1809]	672	<bitlbee-setting name="resource" type="string" scope="account">
[75a4b85]	673	<default>BitlBee</default>
	674
	675	<description>
	676	<para>
	677	Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string.
	678	</para>
	679	</description>
[b7d3cc34]	680	</bitlbee-setting>
	681
[ee5c355]	682	<bitlbee-setting name="resource_select" type="string" scope="account">
	683	<default>priority</default>
[9e768da]	684	<possible-values>priority, activity</possible-values>
[ee5c355]	685
	686	<description>
	687	<para>
	688	Because the IRC interface makes it pretty hard to specify the resource to talk to (when a buddy is online through different resources), this setting was added.
	689	</para>
	690
	691	<para>
[9e768da]	692	Normally it's set to <emphasis>priority</emphasis> which means messages will always be delivered to the buddy's resource with the highest priority. If the setting is set to <emphasis>activity</emphasis>, messages will be delivered to the resource that was last used to send you a message (or the resource that most recently connected).
[ee5c355]	693	</para>
	694	</description>
	695	</bitlbee-setting>
	696
[1195cec]	697	<bitlbee-setting name="root_nick" type="string" scope="global">
	698	<default>root</default>
	699
	700	<description>
	701	<para>
	702	Normally the "bot" that takes all your BitlBee commands is called "root". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
	703	</para>
	704	</description>
	705	</bitlbee-setting>
	706
[89a1809]	707	<bitlbee-setting name="save_on_quit" type="boolean" scope="global">
	708	<default>true</default>
[b7d3cc34]	709
	710	<description>
	711	<para>
[75a4b85]	712	If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
[b7d3cc34]	713	</para>
	714	</description>
[75a4b85]	715	</bitlbee-setting>
[b7d3cc34]	716
[89a1809]	717	<bitlbee-setting name="server" type="string" scope="account">
[75a4b85]	718	<description>
	719	<para>
[30ce1ce]	720	Can be set for Jabber- and OSCAR-connections. For Jabber, you might have to set this if the servername isn't equal to the part after the @ in the Jabber handle. For OSCAR this shouldn't be necessary anymore in recent BitlBee versions.
[75a4b85]	721	</para>
	722	</description>
[b7d3cc34]	723	</bitlbee-setting>
[1186382]	724
	725	<bitlbee-setting name="simulate_netsplit" type="boolean" scope="global">
	726	<default>true</default>
	727
	728	<description>
	729	<para>
	730	Some IRC clients parse quit messages sent by the IRC server to see if someone really left or just disappeared because of a netsplit. By default, BitlBee tries to simulate netsplit-like quit messages to keep the control channel window clean. If you don't like this (or if your IRC client doesn't support this) you can disable this setting.
	731	</para>
	732	</description>
	733	</bitlbee-setting>
[b7d3cc34]	734
[89a1809]	735	<bitlbee-setting name="ssl" type="boolean" scope="account">
	736	<default>false</default>
[b7d3cc34]	737
[75a4b85]	738	<description>
	739	<para>
	740	Currently only available for Jabber connections. Set this to true if the server accepts SSL connections.
	741	</para>
	742	</description>
[b7d3cc34]	743	</bitlbee-setting>
	744
[89a1809]	745	<bitlbee-setting name="strip_html" type="boolean" scope="global">
	746	<default>true</default>
[75a4b85]	747
[b7d3cc34]	748	<description>
	749	<para>
[75a4b85]	750	Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML.
	751	</para>
	752	<para>
	753	If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to <emphasis>always</emphasis>, but this might sometimes accidentally strip non-HTML things too.
[b7d3cc34]	754	</para>
	755	</description>
	756	</bitlbee-setting>
	757
[ee5c355]	758	<bitlbee-setting name="tls" type="boolean" scope="account">
	759	<default>try</default>
	760
	761	<description>
	762	<para>
	763	Newer Jabber servers allow clients to convert a plain-text session to a TLS/SSL-encrypted session. Normally (with this setting set to <emphasis>try</emphasis>) BitlBee will do this, if possible.
	764	</para>
	765
	766	<para>
	767	If you want to force BitlBee to use TLS sessions only (and to give up if that doesn't seem to be possible) you can set this setting to <emphasis>true</emphasis>. Set it to <emphasis>false</emphasis> if you want the session to remain plain-text.
	768	</para>
	769	</description>
	770	</bitlbee-setting>
	771
[89a1809]	772	<bitlbee-setting name="to_char" type="string" scope="global">
[75a4b85]	773	<default>": "</default>
[b7d3cc34]	774
	775	<description>
	776	<para>
[75a4b85]	777	It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using <emphasis>set to_char</emphasis>.
[b7d3cc34]	778	</para>
	779
	780	<para>
[75a4b85]	781	Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
[b7d3cc34]	782	</para>
	783	</description>
	784	</bitlbee-setting>
	785
[89a1809]	786	<bitlbee-setting name="typing_notice" type="boolean" scope="global">
	787	<default>false</default>
[b7d3cc34]	788
	789	<description>
	790	<para>
[b27557b]	791	Sends you a /notice when a user starts typing a message (if supported by the IM protocol and the user's client). To use this, you most likely want to use a script in your IRC client to show this information in a more sensible way.
[b7d3cc34]	792	</para>
	793	</description>
	794	</bitlbee-setting>
	795
[846cec61]	796	<bitlbee-setting name="web_aware" type="string" scope="account">
	797	<default>false</default>
	798
	799	<description>
	800	<para>
	801	ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default.
	802	</para>
	803
	804	<para>
	805	Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled.
	806	</para>
	807	</description>
	808	</bitlbee-setting>
	809
[a6df0b5]	810	<bitlbee-setting name="xmlconsole" type="boolean" scope="account">
	811	<default>false</default>
	812
	813	<description>
	814	<para>
	815	The Jabber module allows you to add a buddy <emphasis>xmlconsole</emphasis> to your contact list, which will then show you the raw XMPP stream between you and the server. You can also send XMPP packets to this buddy, which will then be sent to the server.
	816	</para>
	817	<para>
	818	If you want to enable this XML console permanently (and at login time already), you can set this setting.
	819	</para>
	820	</description>
	821	</bitlbee-setting>
	822
[b7d3cc34]	823	<bitlbee-command name="rename">
	824	<short-description>Rename (renick) a buddy</short-description>
	825	<syntax>rename <oldnick> <newnick></syntax>
	826
	827	<description>
	828	<para>
	829	Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
	830	</para>
	831	</description>
	832
	833	<ircexample>
	834	<ircline nick="itsme">rename itsme_ you</ircline>
	835	<ircaction nick="itsme_">is now known as <emphasis>you</emphasis></ircaction>
	836	</ircexample>
	837
	838	</bitlbee-command>
	839
	840	<bitlbee-command name="yes">
	841	<short-description>Accept a request</short-description>
	842	<syntax>yes [<number>]</syntax>
	843
	844	<description>
	845	<para>
	846	Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the <emphasis>yes</emphasis> command.
	847	</para>
	848
	849	<para>
	850	By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
	851	</para>
	852	</description>
	853
	854	</bitlbee-command>
	855
	856	<bitlbee-command name="no">
	857	<short-description>Deny a request</short-description>
	858	<syntax>no [<number>]</syntax>
	859
	860	<description>
	861	<para>
	862	Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the <emphasis>no</emphasis> command.
	863	</para>
	864
	865	<para>
	866	By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
	867	</para>
	868	</description>
	869	</bitlbee-command>
	870
	871	<bitlbee-command name="qlist">
	872	<short-description>List all the unanswered questions root asked</short-description>
	873	<syntax>qlist</syntax>
	874
	875	<description>
	876	<para>
	877	This gives you a list of all the unanswered questions from root.
	878	</para>
	879	</description>
	880
	881	</bitlbee-command>
	882
	883	<bitlbee-command name="register">
	884	<short-description>Register yourself</short-description>
	885	<syntax>register <password></syntax>
	886
	887	<description>
	888	<para>
	889	BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the <emphasis>register</emphasis> command.
	890	</para>
	891
	892	<para>
	893	Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
	894	</para>
	895
	896	<para>
[1be54a9]	897	To identify yourself in later sessions, you can use the <emphasis>identify</emphasis> command. To change your password later, you can use the <emphasis>set password</emphasis> command.
[b7d3cc34]	898	</para>
	899	</description>
	900
	901	</bitlbee-command>
	902
	903	<bitlbee-command name="identify">
	904	<syntax>identify <password></syntax>
	905	<short-description>Identify yourself with your password</short-description>
	906
	907	<description>
	908	<para>
	909	BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the <emphasis>register</emphasis> command.
	910	</para>
	911
	912	<para>
	913	Once you're registered, you can change your password using <emphasis>set password <password></emphasis>.
	914	</para>
	915	</description>
	916	</bitlbee-command>
	917
	918	<bitlbee-command name="drop">
	919	<syntax>drop <password></syntax>
	920	<short-description>Drop your account</short-description>
	921
	922	<description>
	923	<para>
	924	Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
	925	</para>
	926	</description>
	927	</bitlbee-command>
	928
	929	<bitlbee-command name="blist">
	930	<syntax>blist [all\|online\|offline\|away]</syntax>
	931	<short-description>List all the buddies in your contact list</short-description>
	932
	933	<description>
	934	<para>
	935	You can get a better readable buddy list using the <emphasis>blist</emphasis> command. If you want a complete list (including the offline users) you can use the <emphasis>all</emphasis> argument.
	936	</para>
	937	</description>
	938
	939	</bitlbee-command>
	940
	941	<bitlbee-command name="nick">
	942	<short-description>Change friendly name, nick</short-description>
	943	<syntax>nick <connection> [<new nick>]</syntax>
[b27557b]	944	<syntax>nick <connection></syntax>
[b7d3cc34]	945
	946	<description>
	947	<para>
[b27557b]	948	Deprecated: Use the per-account <emphasis>display_name</emphasis> setting to read and change this information.
[0aaca60]	949	</para>
[b7d3cc34]	950	</description>
	951
	952	<ircexample>
[d5bd9c0]	953	<ircline nick="wouter">account set 1/display_name "The majestik møøse"</ircline>
	954	<ircline nick="root">display_name = `The majestik møøse'</ircline>
[b7d3cc34]	955	</ircexample>
	956
	957	</bitlbee-command>
	958	</chapter>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: