source: configure @ 5d9257cf

Last change on this file since 5d9257cf was d36ef38, checked in by GitHub <noreply@…>, at 2023-04-07T10:51:52Z

Switch from 'which' to 'command -v' to increase portability (#185)

In minimal buildroots 'which' might not be installed, while
'command -v' is a shell built-in in all POSIX 2008 compliant
shells, supported by at least ash, bash, busybox, dash, ksh,
mksh and zsh.

  • Property mode set to 100755
File size: 26.0 KB
Line 
1#!/bin/sh
2
3##############################
4##  Configurer for BitlBee  ##
5##                          ##
6##  Copyright 2004 Lintux   ##
7##  Copyright 2002 Lucumo   ##
8##############################
9
10prefix='/usr/local/'
11bindir='$prefix/bin/'
12sbindir='$prefix/sbin/'
13etcdir='$prefix/etc/bitlbee/'
14mandir='$prefix/share/man/'
15datadir='$prefix/share/bitlbee/'
16config='/var/lib/bitlbee/'
17libdir='$prefix/lib/'
18plugindir='$prefix/lib/bitlbee/'
19includedir='$prefix/include/bitlbee/'
20systemdsystemunitdir=''
21sysusersdir=''
22libevent='/usr/'
23pidfile='/var/run/bitlbee.pid'
24ipcsocket=''
25pcdir='$prefix/lib/pkgconfig'
26systemlibdirs="/lib64 /usr/lib64 /usr/local/lib64 /lib /usr/lib /usr/local/lib"
27sysroot=''
28
29configure_args="$@"
30
31# Set these to default-on to let it be overriden by either the user or purple
32#
33# If the user sets one of these to 1, purple won't disable them.
34# Otherwise, if it's still default-on, it gets included in normal builds,
35# but not purple ones.
36jabber="default-on"
37
38twitter=1
39purple=0
40
41verbose=0
42doc=1
43debug=0
44strip=0
45gcov=0
46asan=0
47plugins=1
48otr=0
49
50events=glib
51external_json_parser=auto
52ssl=auto
53
54pam=0
55ldap=0
56
57pie=1
58
59systemd=auto
60
61arch=$(uname -s)
62arch_rel=$(uname -r)
63
64GLIB_MIN_VERSION=2.32
65
66# Cygwin, Darwin and SunOS < 5.11 do not support PIC/PIE
67case "$arch" in
68        CYGWIN* )
69                pie=0;;
70        Darwin )
71                pie=0;;
72        SunOS )
73                if [ "$arch_rel" = "5.10" ]; then
74                        pie=0
75                fi
76                ;;
77esac
78
79get_version() {
80        REAL_BITLBEE_VERSION=$(grep '^#define BITLBEE_VERSION ' $srcdir/bitlbee.h | sed 's/.*\"\(.*\)\".*/\1/')
81
82        if [ -n "$BITLBEE_VERSION" ]; then
83                # environment variable already set to something to spoof it
84                # don't replace it with the git stuff
85                return
86        fi
87
88        BITLBEE_VERSION=$REAL_BITLBEE_VERSION
89
90        if [ -d $srcdir/.git ] && type git > /dev/null 2> /dev/null; then
91                timestamp=$(cd $srcdir; git show -s --format=%ci HEAD | sed 's/ .*$//; s/-//g')
92                branch=$(cd $srcdir; git rev-parse --abbrev-ref HEAD)
93
94                search='\(.*\)-\([0-9]*\)-\(g[0-9a-f]*\)'
95                replace="\1+$timestamp+$branch+\2-\3-git"
96
97                describe=$(cd $srcdir; git describe --long --tags 2>/dev/null)
98                if [ $? -ne 0 ]; then
99                        describe=${REAL_BITLBEE_VERSION}-0-g$(cd $srcdir; git rev-parse --short HEAD)
100                fi
101
102                BITLBEE_VERSION=$(echo $describe | sed "s#$search#$replace#")
103
104                unset timestamp branch search replace describe
105        fi
106}
107
108if [ "$1" = "--dump-version" ]; then
109        srcdir=$(cd $(dirname $0);pwd)
110        get_version
111        echo $BITLBEE_VERSION
112        exit
113fi
114
115echo BitlBee configure
116
117while [ -n "$1" ]; do
118        e="$(expr "X$1" : 'X--\(.*=.*\)')"
119        if [ -z "$e" ]; then
120                cat<<EOF
121
122Usage: $0 [OPTIONS]
123
124Option          Description                             Default
125
126--prefix=...    Directories to put files in             $prefix
127--bindir=...                                            $bindir
128--sbindir=...                                           $sbindir
129--etcdir=...                                            $etcdir
130--mandir=...                                            $mandir
131--datadir=...                                           $datadir
132--plugindir=...                                         $plugindir
133--systemdsystemunitdir=...                              $systemdsystemunitdir
134--sysusersdir=...                                       $sysusersdir
135--pidfile=...                                           $pidfile
136--config=...                                            $config
137
138--verbose=0/1   Disable/enable verbose build            $verbose
139
140--jabber=0/1    Disable/enable Jabber part              $jabber
141--twitter=0/1   Disable/enable Twitter part             $twitter
142
143--purple=0/1    Disable/enable libpurple support        $purple
144                (automatically disables other protocol modules)
145
146--pam=0/1       Disable/enable PAM authentication       $pam
147--ldap=0/1      Disable/enable LDAP authentication      $ldap
148
149--doc=0/1       Disable/enable help.txt generation      $doc
150--debug=0/1     Disable/enable debugging                $debug
151--strip=0/1     Disable/enable binary stripping         $strip
152--pie=0/1       Build position independent executable   $pie
153--gcov=0/1      Disable/enable test coverage reporting  $gcov
154--asan=0/1      Disable/enable AddressSanitizer         $asan
155--plugins=0/1   Disable/enable plugins support          $plugins
156--otr=0/1/auto/plugin
157                Disable/enable OTR encryption support   $otr
158
159--events=...    Event handler (glib, libevent)          $events
160--ssl=...       SSL library to use (gnutls, nss, openssl, auto)
161                                                        $ssl
162--external_json_parser=0/1/auto Use External JSON parser $external_json_parser
163--systemd=0/1   Enable/disable systemd                  $systemd
164
165
166--target=...    Cross compilation target                same as host
167--sysroot=...   Cross compilation sysroot               $sysroot
168EOF
169                exit;
170        fi
171        eval "$e"
172        shift;
173done
174
175# Expand $prefix and get rid of double slashes
176bindir=$(eval echo "$bindir/" | sed 's/\/\{1,\}/\//g')
177sbindir=$(eval echo "$sbindir/" | sed 's/\/\{1,\}/\//g')
178etcdir=$(eval echo "$etcdir/" | sed 's/\/\{1,\}/\//g')
179mandir=$(eval echo "$mandir/" | sed 's/\/\{1,\}/\//g')
180datadir=$(eval echo "$datadir/" | sed 's/\/\{1,\}/\//g')
181config=$(eval echo "$config/" | sed 's/\/\{1,\}/\//g')
182libdir=$(eval echo "$libdir/" | sed 's/\/\{1,\}/\//g')
183plugindir=$(eval echo "$plugindir/" | sed 's/\/\{1,\}/\//g')
184includedir=$(eval echo "$includedir"/ | sed 's/\/\{1,\}/\//g')
185libevent=$(eval echo "$libevent"/ | sed 's/\/\{1,\}/\//g')
186
187pidfile=$(eval echo "$pidfile" | sed 's/\/\{1,\}/\//g')
188ipcsocket=$(eval echo "$ipcsocket" | sed 's/\/\{1,\}/\//g')
189pcdir=$(eval echo "$pcdir" | sed 's/\/\{1,\}/\//g')
190
191protocols_mods=""
192
193cat <<EOF >Makefile.settings
194## BitlBee settings, generated by configure
195
196# ./configure $configure_args
197
198PREFIX=$prefix
199BINDIR=$bindir
200SBINDIR=$sbindir
201ETCDIR=$etcdir
202MANDIR=$mandir
203DATADIR=$datadir
204PLUGINDIR=$plugindir
205CONFIG=$config
206LIBDIR=$libdir
207INCLUDEDIR=$includedir
208PCDIR=$pcdir
209
210TARGET=$target
211
212INSTALL=install -p
213
214DESTDIR=
215LFLAGS=
216EFLAGS=-lm
217EOF
218
219srcdir=$(cd $(dirname $0);pwd)
220currdir=$(pwd)
221if [ "$srcdir" != "$currdir" ]; then 
222        echo
223        echo "configure script run from a different directory. Will create some symlinks..."
224        if [ ! -e Makefile -o -L Makefile ]; then
225                COPYDIRS="doc lib protocols tests utils"
226                mkdir -p $(cd "$srcdir"; find $COPYDIRS -type d)
227                find . -name Makefile -type l -print0 | xargs -0 rm 2> /dev/null
228                dst="$PWD"
229                cd "$srcdir"
230                for i in $(find . -name Makefile -type f); do
231                        ln -s "$PWD${i#.}" "$dst/$i";
232                done
233                cd "$dst"
234                rm -rf .bzr
235        fi
236       
237        echo "_SRCDIR_=$srcdir/" >> Makefile.settings
238        CFLAGS="$CFLAGS -I${dst}"
239else
240        srcdir=$PWD
241fi
242
243cat<<EOF >config.h
244/* BitlBee settings, generated by configure
245   
246   Do *NOT* use any of these defines in your code without thinking twice, most
247   of them can/will be overridden at run-time */
248
249#define BITLBEE_CONFIGURE_ARGS "$configure_args"
250
251#define CONFIG "$config"
252#define ETCDIR "$etcdir"
253#define VARDIR "$datadir"
254#define PLUGINDIR "$plugindir"
255#define DATADIR "$datadir"
256#define PIDFILE "$pidfile"
257#define IPCSOCKET "$ipcsocket"
258EOF
259
260
261
262if [ -n "$target" ]; then
263        # prepend sysroot to system lib dirs
264
265        systemlibdirs_cross=''
266        for i in $systemlibdirs; do
267                systemlibdirs_cross="$systemlibdirs_cross $sysroot$i"
268        done
269        systemlibdirs=$systemlibdirs_cross
270        unset systemlibdirs_cross
271
272        # backward compatibility
273
274        if [ -z "$PKG_CONFIG_LIBDIR" ]; then
275                PKG_CONFIG_LIBDIR=/usr/$target/lib/pkgconfig
276                export PKG_CONFIG_LIBDIR
277        fi
278
279        if [ -d /usr/$target/bin ]; then
280                PATH=/usr/$target/bin:$PATH
281        fi
282
283        if [ -d /usr/$target/lib ]; then
284                systemlibdirs="$systemlibdirs /usr/$target/lib"
285        fi
286
287        CC=$target-cc
288        LD=$target-ld
289        STRIP=$target-strip
290fi
291
292if [ "$asan" = "1" ]; then
293        CFLAGS="$CFLAGS -fsanitize=address"
294        LDFLAGS="$LDFLAGS -fsanitize=address"
295        debug=1
296fi
297
298if [ "$verbose" = "0" ]; then
299        echo 'VERBOSE=@' >> Makefile.settings
300else
301        echo 'VERBOSE=' >> Makefile.settings
302fi
303
304cat <<EOF >>Makefile.settings
305
306# Enable/disable output verbosity
307ifdef V
308ifeq (\$(V),1)
309        VERBOSE=
310else
311        VERBOSE=@
312endif
313endif
314
315EOF
316
317if [ "$debug" = "1" ]; then
318        echo 'DEBUG=1' >> Makefile.settings
319        CFLAGS="$CFLAGS -g3 -DDEBUG -O0"
320else
321        [ -z "$CFLAGS" ] && CFLAGS="-g -O2"
322fi
323
324if [ "$pie" = "1" ]; then
325        echo 'CFLAGS_BITLBEE=-fPIE' >> Makefile.settings
326        echo 'LDFLAGS_BITLBEE=-pie' >> Makefile.settings
327fi
328
329echo LDFLAGS=$LDFLAGS >> Makefile.settings
330
331echo CFLAGS=$CFLAGS $CPPFLAGS >> Makefile.settings
332
333echo CFLAGS+=-DHAVE_CONFIG_H -D_GNU_SOURCE >> Makefile.settings
334
335if [ -n "$CC" ]; then
336        CC=$CC
337elif type gcc > /dev/null 2> /dev/null; then
338        CC=gcc
339elif type cc > /dev/null 2> /dev/null; then
340        CC=cc
341else
342        echo 'Cannot find a C compiler, aborting.'
343        exit 1;
344fi
345
346echo "CC=$CC" >> Makefile.settings;
347if echo $CC | grep -qw 'gcc\|clang'; then
348        # Apparently -Wall is gcc-specific?
349        echo CFLAGS+=-Wall -Wformat -Werror=format-security >> Makefile.settings
350fi
351
352if [ -z "$LD" ]; then
353        if type ld > /dev/null 2> /dev/null; then
354                LD=ld
355        else
356                echo 'Cannot find ld, aborting.'
357                exit 1;
358        fi
359fi
360
361echo "LD=$LD" >> Makefile.settings
362
363if [ -z "$PKG_CONFIG" ]; then
364        PKG_CONFIG=pkg-config
365fi
366
367if ! $PKG_CONFIG --version > /dev/null 2>/dev/null; then
368        echo
369        echo 'Cannot find pkg-config, aborting.'
370        exit 1
371fi
372
373if $PKG_CONFIG glib-2.0; then
374        if $PKG_CONFIG glib-2.0 --atleast-version=$GLIB_MIN_VERSION; then
375                cat<<EOF >>Makefile.settings
376EFLAGS+=$($PKG_CONFIG --libs glib-2.0 gmodule-2.0)
377CFLAGS+=$($PKG_CONFIG --cflags glib-2.0 gmodule-2.0)
378EOF
379        else
380                echo
381                echo 'Found glib2 '$($PKG_CONFIG glib-2.0 --modversion)', but version '$GLIB_MIN_VERSION' or newer is required.'
382                exit 1
383        fi
384else
385        echo
386        echo 'Cannot find glib2 development libraries, aborting. (Install libglib2-dev?)'
387        exit 1
388fi
389
390if [ "$events" = "libevent" ]; then
391        if ! [ -f "${libevent}include/event.h" ]; then
392                echo
393                echo 'Warning: Could not find event.h, you might have to install it and/or specify'
394                echo 'its location using the --libevent= argument. (Example: If event.h is in'
395                echo '/usr/local/include and binaries are in /usr/local/lib: --libevent=/usr/local)'
396        fi
397       
398        echo '#define EVENTS_LIBEVENT' >> config.h
399        cat <<EOF >>Makefile.settings
400EFLAGS+=-levent -L${libevent}lib
401CFLAGS+=-I${libevent}include
402EOF
403elif [ "$events" = "glib" ]; then
404        ## We already use glib anyway, so this is all we need (and in fact not even this, but just to be sure...):
405        echo '#define EVENTS_GLIB' >> config.h
406else
407        echo
408        echo 'ERROR: Unknown event handler specified.'
409        exit 1
410fi
411echo 'EVENT_HANDLER=events_'$events'.o' >> Makefile.settings
412
413if [ "$external_json_parser" = "auto" ]; then
414        if pkg-config --exists json-parser; then
415                external_json_parser=1
416        else
417                external_json_parser=0
418        fi
419fi
420echo "EXTERNAL_JSON_PARSER=$external_json_parser" >> Makefile.settings
421if [ "$external_json_parser" = "1" ]; then
422    echo "CFLAGS+=$(pkg-config --cflags json-parser)" >> Makefile.settings
423    echo "CFLAGS+=-DUSE_EXTERNAL_JSON_PARSER" >> Makefile.settings
424    echo "LDFLAGS_BITLBEE+=$(pkg-config --libs json-parser)" >> Makefile.settings
425    echo "LDFLAGS_TESTS+=$(pkg-config --libs json-parser)" >> Makefile.settings
426fi
427
428echo CFLAGS+=-I"${srcdir}" -I"${srcdir}"/lib -I"${srcdir}"/protocols -I. >> Makefile.settings
429
430detect_gnutls()
431{
432        if $PKG_CONFIG --exists gnutls; then
433                cat <<EOF >>Makefile.settings
434EFLAGS+=$($PKG_CONFIG --libs gnutls) $(libgcrypt-config --libs)
435CFLAGS+=$($PKG_CONFIG --cflags gnutls) $(libgcrypt-config --cflags)
436EOF
437                ssl=gnutls
438                if ! $PKG_CONFIG gnutls --atleast-version=2.8; then
439                        echo
440                        echo 'Warning: With GnuTLS versions <2.8, certificate expire dates are not verified.'
441                fi
442                ret=1
443        elif libgnutls-config --version > /dev/null 2> /dev/null; then
444                cat <<EOF >>Makefile.settings
445EFLAGS+=$(libgnutls-config --libs) $(libgcrypt-config --libs)
446CFLAGS+=$(libgnutls-config --cflags) $(libgcrypt-config --cflags)
447EOF
448               
449                ssl=gnutls
450                ret=1;
451        else
452                ret=0;
453        fi;
454}
455
456detect_nss()
457{
458        if $PKG_CONFIG --version > /dev/null 2>/dev/null && $PKG_CONFIG nss; then
459                cat<<EOF >>Makefile.settings
460EFLAGS+=$($PKG_CONFIG --libs nss)
461CFLAGS+=$($PKG_CONFIG --cflags nss)
462EOF
463               
464                ssl=nss
465                ret=1;
466        else
467                ret=0;
468        fi;
469}
470
471RESOLV_TESTCODE='
472#include <sys/types.h>
473#include <netinet/in.h>
474#include <arpa/nameser.h>
475#include <resolv.h>
476
477int main()
478{
479
480        res_query( NULL, 0, 0, NULL, 0);
481        dn_expand( NULL, NULL, NULL, NULL, 0);
482        dn_skipname( NULL, NULL);
483}
484'
485RESOLV_NS_TESTCODE='
486#include <sys/types.h>
487#include <netinet/in.h>
488#include <arpa/nameser.h>
489#include <resolv.h>
490
491int main()
492{
493        ns_initparse( NULL, 0, NULL );
494        ns_parserr( NULL, ns_s_an, 0, NULL );
495}
496'
497RESOLV_NS_TYPES_TESTCODE='
498#include <sys/types.h>
499#include <netinet/in.h>
500#include <arpa/nameser.h>
501
502int main()
503{
504        ns_msg nsh;
505        ns_rr rr;
506
507        /* Not all platforms we want to work on have
508         ns_* routines, so use this to make sure
509         the compiler uses it.*/
510        return (int)(sizeof(nsh) + sizeof(rr));
511}
512'
513
514BACKTRACE_TESTCODE='
515#include <execinfo.h>
516
517int main()
518{
519        void *trace[16];
520        return backtrace(trace, 16);
521}
522'
523
524detect_resolv_dynamic()
525{
526        case "$arch" in
527        OpenBSD )
528                # In FreeBSD res_*/dn_* routines are present in libc.so
529                LIBRESOLV=;;
530        FreeBSD )
531                # In FreeBSD res_*/dn_* routines are present in libc.so
532                LIBRESOLV=;;
533        CYGWIN* )
534                # In Cygwin res_*/dn_* routines are present in libc.so
535                LIBRESOLV=;;
536        * )
537                LIBRESOLV=-lresolv;;
538        esac
539        TMPFILE=$(mktemp /tmp/bitlbee-configure.XXXXXX)
540        ret=1
541        echo "$RESOLV_TESTCODE" | $CC -o $TMPFILE -x c - $LIBRESOLV >/dev/null 2>/dev/null
542        if [ "$?" = "0" ]; then
543                echo "EFLAGS+=$LIBRESOLV" >> Makefile.settings
544                ret=0
545        fi
546
547        rm -f $TMPFILE
548        return $ret
549}
550
551detect_resolv_static()
552{
553        TMPFILE=$(mktemp /tmp/bitlbee-configure.XXXXXX)
554        ret=1
555        for i in $systemlibdirs; do
556                if [ -f $i/libresolv.a ]; then
557                        echo "$RESOLV_TESTCODE" | $CC -o $TMPFILE -x c - -Wl,$i/libresolv.a >/dev/null 2>/dev/null
558                        if [ "$?" = "0" ]; then
559                                echo 'EFLAGS+='$i'/libresolv.a' >> Makefile.settings
560                                ret=0
561                        fi
562                fi
563        done
564
565        rm -f $TMPFILE
566        return $ret
567}
568
569detect_resolv_ns_dynamic()
570{
571        case "$arch" in
572        FreeBSD )
573                # In FreeBSD ns_ routines are present in libc.so
574                LIBRESOLV=;;
575        * )
576                LIBRESOLV=-lresolv;;
577        esac
578        TMPFILE=$(mktemp /tmp/bitlbee-configure.XXXXXX)
579        ret=1
580        echo "$RESOLV_NS_TESTCODE" | $CC -o $TMPFILE -x c - $LIBRESOLV >/dev/null 2>/dev/null
581        if [ "$?" = "0" ]; then
582                ret=0
583        fi
584
585        rm -f $TMPFILE
586        return $ret
587}
588
589detect_resolv_ns_static()
590{
591        TMPFILE=$(mktemp /tmp/bitlbee-configure.XXXXXX)
592        ret=1
593        for i in $systemlibdirs; do
594                if [ -f $i/libresolv.a ]; then
595                        echo "$RESOLV_NS_TESTCODE" | $CC -o $TMPFILE -x c - -Wl,$i/libresolv.a >/dev/null 2>/dev/null
596                        if [ "$?" = "0" ]; then
597                                ret=0
598                        fi
599                fi
600        done
601
602        rm -f $TMPFILE
603        return $ret
604}
605
606detect_nameser_has_ns_types()
607{
608        TMPFILE=$(mktemp /tmp/bitlbee-configure.XXXXXX)
609        ret=1
610        # since we aren't actually linking with ns_* routines
611        # we can just compile the test code
612        echo "$RESOLV_NS_TYPES_TESTCODE" | $CC -o $TMPFILE -x c -  >/dev/null 2>/dev/null
613        if [ "$?" = "0" ]; then
614                ret=0
615        fi
616
617        rm -f $TMPFILE
618        return $ret
619}
620
621detect_backtrace()
622{
623        TMPFILE=$(mktemp /tmp/bitlbee-configure.XXXXXX)
624        ret=1
625        echo "$BACKTRACE_TESTCODE" | $CC -o $TMPFILE -x c -  >/dev/null 2>/dev/null
626        if [ "$?" = "0" ]; then
627                ret=0
628        fi
629
630        rm -f $TMPFILE
631        return $ret
632}
633
634if [ "$ssl" = "auto" ]; then
635        detect_gnutls
636        if [ "$ret" = "0" ]; then
637                # Disable NSS for now as it's known to not work very well ATM.
638                #detect_nss
639                :
640        fi
641elif [ "$ssl" = "gnutls" ]; then
642        detect_gnutls
643elif [ "$ssl" = "nss" ]; then
644        detect_nss
645elif [ "$ssl" = "openssl" ]; then
646        echo
647        echo 'No detection code exists for OpenSSL. Make sure that you have a complete'
648        echo 'installation of OpenSSL (including devel/header files) before reporting'
649        echo 'compilation problems.'
650        echo
651        echo 'Also, keep in mind that the OpenSSL is, according to some people, not'
652        echo 'completely GPL-compatible. Using GnuTLS is recommended and better supported'
653        echo 'by us. However, on many BSD machines, OpenSSL can be considered part of the'
654        echo 'operating system, which makes it GPL-compatible.'
655        echo
656        echo 'For more info, see: http://www.openssl.org/support/faq.html#LEGAL2'
657        echo '                    http://www.gnome.org/~markmc/openssl-and-the-gpl.html'
658        echo
659        echo 'Please note that distributing a BitlBee binary which links to OpenSSL is'
660        echo 'probably illegal. If you want to create and distribute a binary BitlBee'
661        echo 'package, you really should use GnuTLS instead.'
662        echo
663        echo 'Also, the OpenSSL license requires us to say this:'
664        echo ' *    "This product includes software developed by the OpenSSL Project'
665        echo ' *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"'
666       
667        echo 'EFLAGS+=-lssl -lcrypto' >> Makefile.settings
668       
669        ret=1
670else
671        echo
672        echo 'ERROR: Unknown SSL library specified.'
673        exit 1
674fi
675
676if [ "$ret" = "0" ]; then
677        echo
678        echo 'ERROR: Could not find a suitable SSL library (GnuTLS, libnss or OpenSSL).'
679        echo '       Please note that this script doesn'\''t have detection code for OpenSSL,'
680        echo '       so if you want to use that, you have to select it by hand.'
681       
682        exit 1
683fi;
684
685echo 'SSL_CLIENT=ssl_'$ssl'.o' >> Makefile.settings
686
687if detect_nameser_has_ns_types; then
688        echo '#define NAMESER_HAS_NS_TYPES' >> config.h
689fi
690if detect_resolv_dynamic || detect_resolv_static; then
691        echo '#define HAVE_RESOLV_A' >> config.h
692        if detect_resolv_ns_dynamic || detect_resolv_ns_static; then
693                echo '#define HAVE_RESOLV_A_WITH_NS' >> config.h
694        fi
695else
696        echo 'Insufficient resolv routines. Jabber server must be set explicitly'
697fi
698
699if detect_backtrace; then
700        echo '#define HAVE_BACKTRACE' >> config.h
701        echo '#define CRASHFILE "'$config'crash.log"' >> config.h
702fi
703
704STORAGES="xml"
705
706for i in $STORAGES; do
707        STORAGE_OBJS="$STORAGE_OBJS storage_$i.o"
708done
709echo "STORAGE_OBJS="$STORAGE_OBJS >> Makefile.settings
710
711authobjs=
712authlibs=
713if [ "$pam" = 0 ]; then
714        echo '#undef WITH_PAM' >> config.h
715else
716        if ! echo '#include <security/pam_appl.h>' | $CC -E - >/dev/null 2>/dev/null; then
717                echo 'Cannot find libpam development libraries, aborting. (Install libpam0g-dev?)'
718                exit 1
719        fi
720        echo '#define WITH_PAM' >> config.h
721        authobjs=$authobjs'auth_pam.o '
722        authlibs=$authlibs'-lpam '
723fi
724if [ "$ldap" = 0 ]; then
725        echo '#undef WITH_LDAP' >> config.h
726else
727        if ! echo '#include <ldap.h>' | $CC -E - >/dev/null 2>/dev/null; then
728                echo 'Cannot find libldap development libraries, aborting. (Install libldap2-dev?)'
729                exit 1
730        fi
731        echo '#define WITH_LDAP' >> config.h
732        authobjs=$authobjs'auth_ldap.o '
733        authlibs=$authlibs'-lldap '
734fi
735echo AUTH_OBJS=$authobjs >> Makefile.settings
736echo EFLAGS+=$authlibs >> Makefile.settings
737
738if [ "$strip" = 0 ]; then
739        echo "STRIP=\# skip strip" >> Makefile.settings;
740else
741        if [ "$debug" = 1 ]; then
742                echo
743                echo 'Stripping binaries does not make sense when debugging. Stripping disabled.'
744                echo 'STRIP=\# skip strip' >> Makefile.settings
745                strip=0;
746        elif [ -n "$STRIP" ]; then
747                echo "STRIP=$STRIP" >> Makefile.settings;
748        elif type strip > /dev/null 2> /dev/null; then
749                echo "STRIP=strip" >> Makefile.settings;
750        else
751                echo
752                echo 'No strip utility found, cannot remove unnecessary parts from executable.'
753                echo 'STRIP=\# skip strip' >> Makefile.settings
754                strip=0;
755        fi;
756fi
757
758if [ ! "$systemd" = 0 ]; then
759    if ! $PKG_CONFIG --exists systemd ; then
760        if [ $systemd -eq 1 ]; then
761            echo "systemd requested but not found"
762            exit 1
763        else
764            systemd=0
765        fi
766    elif [ $systemd = "auto" ]; then
767        systemd=1
768    fi
769fi
770
771pkgconf_systemd_var() {
772    # First try deprecated variable, use newer variable if not found
773    if $PKG_CONFIG --print-variables systemd | grep -q $1 ; then
774        $PKG_CONFIG --variable=$1 systemd
775    else
776        $PKG_CONFIG --variable=$2 systemd
777    fi
778}
779
780if [ "$systemd" -eq 1 ]; then
781        if [ -z "$systemdsystemunitdir" ]; then
782                systemdsystemunitdir=$(pkgconf_systemd_var systemdsystemunitdir systemd_system_unit_dir)
783        fi
784        if [ -z "$sysusersdir" ] ; then
785                sysusersdir=$(pkgconf_systemd_var sysusersdir sysusers_dir)
786        fi
787fi
788
789if [ -n "$systemdsystemunitdir" ]; then
790        echo "SYSTEMDSYSTEMUNITDIR=$systemdsystemunitdir" >> Makefile.settings
791fi
792if [ -n "$sysusersdir" ]; then
793        echo "SYSUSERSDIR=$sysusersdir" >> Makefile.settings
794fi
795
796if [ "$gcov" = "1" ]; then
797        echo "CFLAGS+=--coverage" >> Makefile.settings
798        echo "EFLAGS+=--coverage" >> Makefile.settings
799fi
800
801if [ "$plugins" = 0 ]; then
802        plugindir=""
803        echo '#undef WITH_PLUGINS' >> config.h
804else
805        echo '#define WITH_PLUGINS' >> config.h
806fi
807
808otrprefix=""
809if [ "$otr" = "auto" ]; then
810        ! $PKG_CONFIG --exists libotr
811        otr=$?
812fi
813
814if [ "$otr" != 0 ] && ! $PKG_CONFIG --atleast-version=4.0 --print-errors libotr; then
815        exit 1
816fi
817
818if [ "$otr" = 1 ]; then
819        # BI == built-in
820        echo '#define OTR_BI' >> config.h
821        echo "EFLAGS+=$($PKG_CONFIG --libs libotr) $(libgcrypt-config --libs)" >> Makefile.settings
822        echo "CFLAGS+=$($PKG_CONFIG --cflags libotr) $(libgcrypt-config --cflags)" >> Makefile.settings
823        echo 'OTR_BI=otr.o' >> Makefile.settings
824elif [ "$otr" = "plugin" ]; then
825        # for some mysterious reason beyond the comprehension of my mortal mind,
826        # the libgcrypt flags aren't needed when building as plugin. add them anyway.
827        echo '#define OTR_PI' >> config.h
828        echo "OTRFLAGS=$($PKG_CONFIG --libs libotr) $(libgcrypt-config --libs)" >> Makefile.settings
829        echo "CFLAGS+=$($PKG_CONFIG --cflags libotr) $(libgcrypt-config --cflags)" >> Makefile.settings
830        echo 'OTR_PI=otr.so' >> Makefile.settings
831fi
832
833if [ -z "$PYTHON" ]; then
834        for pp in python python3 python2; do
835                if command -v $pp > /dev/null; then
836                        PYTHON=$pp
837                        break
838                fi
839        done
840fi
841
842if [ "$doc" = "1" ]; then
843        # check this here just in case someone tries to install it in python2.4...
844        if [ ! -e $srcdir/doc/user-guide/help.txt ] && ! $PYTHON -m xml.etree.ElementTree > /dev/null 2>&1; then
845                echo
846                echo 'ERROR: Python (>=2.5 or 3.x) is required to generate docs'
847                echo "(Use the PYTHON environment variable if it's in a weird location)"
848                exit 1
849        fi
850        echo "DOC=1" >> Makefile.settings
851        echo "PYTHON=$PYTHON" >> Makefile.settings
852fi
853
854get_version
855
856if [ ! "$BITLBEE_VERSION" = "$REAL_BITLBEE_VERSION" ]; then
857        echo "Spoofing version number: $BITLBEE_VERSION"
858        echo "#undef BITLBEE_VERSION" >> config.h
859        echo '#define BITLBEE_VERSION "'$BITLBEE_VERSION'"' >> config.h
860        echo
861fi
862
863if ! make helloworld > /dev/null 2>&1; then
864        echo "WARNING: Your version of make (BSD make?) does not support BitlBee's makefiles."
865        echo "BitlBee needs GNU make to build properly. On most systems GNU make is available"
866        echo "under the name 'gmake'."
867        echo
868        if gmake helloworld > /dev/null 2>&1; then
869                echo "gmake seems to be available on your machine, great."
870                echo
871        else
872                echo "gmake is not installed (or not working). Please try to install it."
873                echo
874        fi
875fi
876
877pkgconfiglibs=''
878case "$arch" in
879CYGWIN* )
880        pkgconfiglibs='-L${libdir} -lbitlbee -no-undefined'
881esac
882
883pkgconfigrequires='glib-2.0'
884if [ "$external_json_parser" = '1' ]; then
885        pkgconfigrequires="$pkgconfigrequires json-parser"
886fi
887
888cat <<EOF >bitlbee.pc
889prefix=$prefix
890includedir=$includedir
891plugindir=$plugindir
892libdir=$libdir
893datadir=$datadir
894
895Name: bitlbee
896Description: IRC to IM gateway
897Requires: $pkgconfigrequires
898Version: $BITLBEE_VERSION
899Libs: $pkgconfiglibs
900Cflags: -I\${includedir}
901
902EOF
903
904protocols=''
905protoobjs=''
906
907if [ "$purple" = 0 ]; then
908        echo '#undef WITH_PURPLE' >> config.h
909else
910        if ! $PKG_CONFIG purple; then
911                echo
912                echo 'Cannot find libpurple development libraries, aborting. (Install libpurple-dev?)'
913                exit 1
914        fi
915        echo '#define WITH_PURPLE' >> config.h
916        cat<<EOF >>Makefile.settings
917EFLAGS += $($PKG_CONFIG purple --libs)
918PURPLE_CFLAGS += $($PKG_CONFIG purple --cflags)
919EOF
920        protocols=$protocols'purple '
921        protoobjs=$protoobjs'purple_mod.o '
922
923        # only disable these if the user didn't enable them explicitly
924        [ "$jabber" = "default-on" ] && jabber=0
925
926        echo '#undef PACKAGE' >> config.h
927        echo '#define PACKAGE "BitlBee-LIBPURPLE"' >> config.h
928       
929        if [ "$events" = "libevent" ]; then
930                echo 'Warning: Some libpurple modules (including msn-pecan) do their event handling'
931                echo 'outside libpurple, talking to GLib directly. At least for now the combination'
932                echo 'libpurple + libevent is *not* recommended!'
933                echo
934        fi
935fi
936
937case "$CC" in
938*gcc* )
939        echo CFLAGS+=-MMD -MF .depend/\$@.d >> Makefile.settings
940        for i in . lib tests protocols protocols/*/; do
941                mkdir -p $i/.depend
942        done
943esac
944
945if [ "$jabber" = 0 ]; then
946        echo '#undef WITH_JABBER' >> config.h
947else
948        echo '#define WITH_JABBER' >> config.h
949        protocols=$protocols'jabber '
950        protoobjs=$protoobjs'jabber_mod.o '
951fi
952
953if [ "$twitter" = 0 ]; then
954        echo '#undef WITH_TWITTER' >> config.h
955else
956        echo '#define WITH_TWITTER' >> config.h
957        protocols=$protocols'twitter '
958        protoobjs=$protoobjs'twitter_mod.o '
959fi
960
961if [ "$protocols" = "PROTOCOLS = " ]; then
962        echo "Warning: You haven't selected any communication protocol to compile!"
963        echo "         BitlBee will run, but you will be unable to connect to IM servers!"
964fi
965
966echo "PROTOCOLS = $protocols" >> Makefile.settings
967echo "PROTOOBJS = $protoobjs" >> Makefile.settings
968
969echo Architecture: $arch
970case "$arch" in
971Linux )
972;;
973GNU/* )
974;;
975*BSD )
976;;
977Darwin )
978        echo 'STRIP=\# skip strip' >> Makefile.settings
979;;
980IRIX )
981;;
982SunOS )
983        echo 'EFLAGS+=-lresolv -lnsl -lsocket' >> Makefile.settings
984        echo 'STRIP=\# skip strip' >> Makefile.settings
985        echo '#define NO_FD_PASSING' >> config.h
986        if [ "$arch_rel" = "5.10" ]; then
987                echo '#define NO_STRCASESTR' >> config.h
988        fi
989;;
990AIX )
991        echo 'EFLAGS+=-Wl,-brtl' >> Makefile.settings
992;;
993CYGWIN* )
994        echo 'EFLAGS+=-Wl,--export-all,--out-implib,libbitlbee.dll.a' >> Makefile.settings
995        echo 'IMPLIB=libbitlbee.dll.a' >> Makefile.settings
996;;
997Windows )
998        echo 'Native windows compilation is not supported anymore, use cygwin instead.'
999;;
1000* )
1001        echo 'We haven'\''t tested BitlBee on many platforms yet, yours is untested. YMMV.'
1002        echo 'Please report any problems at https://bugs.bitlbee.org/.'
1003;;
1004esac
1005
1006if [ -n "$target" ]; then
1007        echo "Cross-compiling for: $target"
1008fi
1009
1010echo
1011echo 'Configuration done:'
1012
1013if [ "$debug" = "1" ]; then
1014        echo '  Debugging enabled.'
1015else
1016        echo '  Debugging disabled.'
1017fi
1018
1019if [ "$asan" = "1" ]; then
1020        echo '  AddressSanitizer (ASAN) enabled.'
1021else
1022        echo '  AddressSanitizer (ASAN) disabled.'
1023fi
1024
1025if [ "$pie" = "1" ]; then
1026        echo '  Building PIE executable'
1027else
1028        echo '  Building non-PIE executable'
1029fi
1030
1031if [ "$strip" = "1" ]; then
1032        echo '  Binary stripping enabled.'
1033else
1034        echo '  Binary stripping disabled.'
1035fi
1036
1037if [ "$otr" = "1" ]; then
1038        echo '  Off-the-Record (OTR) Messaging enabled.'
1039elif [ "$otr" = "plugin" ]; then
1040        echo '  Off-the-Record (OTR) Messaging enabled (as a plugin).'
1041else
1042        echo '  Off-the-Record (OTR) Messaging disabled.'
1043fi
1044
1045if [ "$systemd" = "1" ]; then
1046        echo '  systemd enabled.'
1047else
1048        echo '  systemd disabled.'
1049fi
1050
1051echo '  Using python: '$PYTHON
1052
1053if [ "$external_json_parser" = "1" ]; then
1054    echo '  Using system JSON parser.'
1055else
1056    echo '  Using bundled JSON parser.'
1057fi
1058
1059echo '  Using event handler: '$events
1060echo '  Using SSL library: '$ssl
1061#echo '  Building with these storage backends: '$STORAGES
1062
1063if [ -n "$protocols" ]; then
1064        echo '  Building with these protocols:' $protocols$protocols_mods
1065        case "$protocols" in
1066        *purple*)
1067                echo "    Note that BitlBee-libpurple is supported on a best-effort basis. It's"
1068                echo "    not *fully* compatible with normal BitlBee. Don't use it unless you"
1069                echo "    absolutely need it (i.e. support for a certain protocol or feature)."
1070        esac
1071else
1072        echo '  Building without IM-protocol support. We wish you a lot of fun...'
1073fi
Note: See TracBrowser for help on using the repository browser.