source: Makefile @ af09afd

###########################
## Makefile for BitlBee  ##
##                       ##
## Copyright 2002 Lintux ##
###########################

### DEFINITIONS

-include Makefile.settings

# Program variables
objects = bitlbee.o dcc.o help.o ipc.o irc.o irc_im.o irc_cap.o irc_channel.o irc_commands.o irc_send.o irc_user.o irc_util.o nick.o $(OTR_BI) query.o root_commands.o set.o storage.o $(STORAGE_OBJS) auth.o $(AUTH_OBJS) unix.o conf.o log.o
allheaders = $(wildcard $(_SRCDIR_)*.h $(_SRCDIR_)lib/*.h $(_SRCDIR_)protocols/*.h)
ifeq ($(EXTERNAL_JSON_PARSER),1)
headers = $(filter-out $(_SRCDIR_)lib/json.h,$(allheaders))
else
headers = $(allheaders)
endif
subdirs = lib protocols

OUTFILE = bitlbee

# Expansion of variables
subdirobjs = $(foreach dir,$(subdirs),$(dir)/$(dir).o)

all: $(OUTFILE) $(OTR_PI) doc systemd

doc:
ifdef DOC
        $(MAKE) -C doc
endif

uninstall: uninstall-bin uninstall-doc 
        @echo -e '\nmake uninstall does not remove files in '$(DESTDIR)$(ETCDIR)', you can use make uninstall-etc to do that.\n'

install: install-bin install-doc install-plugins
        @echo
        @echo Installed successfully
        @echo
ifndef SYSTEMDSYSTEMUNITDIR
        @if ! [ -d $(DESTDIR)$(CONFIG) ]; then echo -e '\nThe configuration directory $(DESTDIR)$(CONFIG) does not exist yet, don'\''t forget to create it!'; fi
endif
        @if ! [ -e $(DESTDIR)$(ETCDIR)/bitlbee.conf ]; then echo -e '\nNo files are installed in '$(DESTDIR)$(ETCDIR)' by make install. Run make install-etc to do that.'; fi
ifdef SYSTEMDSYSTEMUNITDIR
        @echo If you want to start BitlBee using systemd, try \"make install-systemd\".
endif
        @echo To be able to compile third party plugins, run \"make install-dev\"
        @echo

.PHONY:   install   install-bin   install-etc   install-doc install-plugins install-systemd install-dev \
        uninstall uninstall-bin uninstall-etc uninstall-doc uninstall-etc \
        all clean distclean tar $(subdirs) doc

Makefile.settings:
        @echo
        @echo Run ./configure to create Makefile.settings, then rerun make
        @echo

clean: $(subdirs)
        rm -f *.o $(OUTFILE) core utils/bitlbeed init/bitlbee*.service
        $(MAKE) -C tests clean

distclean: clean $(subdirs)
        rm -rf .depend
        rm -f Makefile.settings config.h bitlbee.pc
        find . -name 'DEADJOE' -o -name '*.orig' -o -name '*.rej' -o -name '*~' -exec rm -f {} \;
        @# May still be present in dirs of disabled protocols.
        -find . -name .depend -exec rm -rf {} \;
        $(MAKE) -C tests distclean

check: all
        $(MAKE) -C tests

gcov: check
        gcov *.c

lcov: check
        lcov --directory . --capture --output-file bitlbee.info
        genhtml -o coverage bitlbee.info

install-doc:
ifdef DOC
        $(MAKE) -C doc install
endif

uninstall-doc:
ifdef DOC
        $(MAKE) -C doc uninstall
endif

install-bin:
        mkdir -p $(DESTDIR)$(SBINDIR)
        $(INSTALL) -m 0755 $(OUTFILE) $(DESTDIR)$(SBINDIR)/$(OUTFILE)
ifdef IMPLIB
        # import library for cygwin
        mkdir -p $(DESTDIR)$(LIBDIR)
        $(INSTALL) -m 0644 $(IMPLIB) $(DESTDIR)$(LIBDIR)/$(IMPLIB)
endif

uninstall-bin:
        rm -f $(DESTDIR)$(SBINDIR)/$(OUTFILE)
ifdef IMPLIB
        rm -f $(DESTDIR)$(LIBDIR)/$(IMPLIB)
endif

install-dev:
        mkdir -p $(DESTDIR)$(INCLUDEDIR)
        $(INSTALL) -m 0644 config.h $(DESTDIR)$(INCLUDEDIR)
        for i in $(headers); do $(INSTALL) -m 0644 $$i $(DESTDIR)$(INCLUDEDIR); done
        mkdir -p $(DESTDIR)$(PCDIR)
        $(INSTALL) -m 0644 bitlbee.pc $(DESTDIR)$(PCDIR)

uninstall-dev:
        rm -f $(foreach hdr,$(headers),$(DESTDIR)$(INCLUDEDIR)/$(hdr))
        -rmdir $(DESTDIR)$(INCLUDEDIR)
        rm -f $(DESTDIR)$(PCDIR)/bitlbee.pc

install-etc:
        mkdir -p $(DESTDIR)$(ETCDIR)
        $(INSTALL) -m 0644 $(_SRCDIR_)motd.txt $(DESTDIR)$(ETCDIR)/motd.txt
        $(INSTALL) -m 0644 $(_SRCDIR_)bitlbee.conf $(DESTDIR)$(ETCDIR)/bitlbee.conf

uninstall-etc:
        rm -f $(DESTDIR)$(ETCDIR)/motd.txt
        rm -f $(DESTDIR)$(ETCDIR)/bitlbee.conf
        -rmdir $(DESTDIR)$(ETCDIR)

install-plugins: install-plugin-otr

install-plugin-otr:
ifdef OTR_PI
        mkdir -p $(DESTDIR)$(PLUGINDIR)
        $(INSTALL) -m 0755 otr.so $(DESTDIR)$(PLUGINDIR)
endif

systemd:
ifdef SYSTEMDSYSTEMUNITDIR
        mkdir -p init
        sed 's|@sbindir@|$(SBINDIR)|' $(_SRCDIR_)init/bitlbee.service.in > init/bitlbee.service
        sed 's|@sbindir@|$(SBINDIR)|' $(_SRCDIR_)init/bitlbee@.service.in > init/bitlbee@.service
endif

install-systemd: systemd
ifdef SYSTEMDSYSTEMUNITDIR
        mkdir -p $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
        $(INSTALL) -m 0644 init/bitlbee.service $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
        $(INSTALL) -m 0644 init/bitlbee@.service $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
        $(INSTALL) -m 0644 $(_SRCDIR_)init/bitlbee.socket $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
else
        @echo SYSTEMDSYSTEMUNITDIR not set, not installing systemd unit files.
endif

ifdef SYSUSERSDIR
        $(INSTALL) -Dm644 init/bitlbee.sysusers $(DESTDIR)/$(SYSUSERSDIR)/bitlbee.conf
else
        @echo SYSUSERSDIR not set, not install sysusers.d files
endif

tar:
        fakeroot debian/rules clean || make distclean
        x=$$(basename $$(pwd)); \
        cd ..; \
        tar czf $$x.tar.gz --exclude=debian --exclude=.git* --exclude=.depend $$x

$(subdirs):
        $(MAKE) -C $@ $(MAKECMDGOALS)

$(OTR_PI): %.so: $(_SRCDIR_)%.c
        @echo '*' Building plugin $@
        $(VERBOSE) $(CC) $(CFLAGS) -fPIC -shared $(LDFLAGS) $< -o $@ $(OTRFLAGS)

$(objects): %.o: $(_SRCDIR_)%.c
        @echo '*' Compiling $<
        $(VERBOSE) $(CC) -c $(CFLAGS) $(CFLAGS_BITLBEE) $< -o $@

$(objects): Makefile Makefile.settings config.h

$(OUTFILE): $(objects) $(subdirs)
        @echo '*' Linking $(OUTFILE)
        $(VERBOSE) $(CC) $(objects) $(subdirobjs) -o $(OUTFILE) $(LDFLAGS_BITLBEE) $(LDFLAGS) $(EFLAGS)
ifneq ($(firstword $(STRIP)), \#)
        @echo '*' Stripping $(OUTFILE)
        $(VERBOSE) -$(STRIP) $(OUTFILE)
endif

ctags: 
        ctags `find . -name "*.c"` `find . -name "*.h"`

# Using this as a bogus Make target to test if a GNU-compatible version of
# make is available.
helloworld:
        @echo Hello World

# Check if we can load the helpfile. (This fails if some article is >1KB.)
# If print returns a NULL pointer, the file is unusable.
testhelp: doc
        gdb --eval-command='b main' --eval-command='r' \
            --eval-command='print help_init(&global->helpfile, "doc/user-guide/help.txt")' \
            $(OUTFILE) < /dev/null

-include .depend/*.d
# DO NOT DELETE