source: skype/README @ 0b77a9b

= Skype plugin for BitlBee
Miklos Vajna <vmiklos-at-vmiklos-dot-hu>

== Status

[quote, Wilmer van der Gaast (author of BitlBee)]
____
Okay, this exists now, with lots of thanks to vmiklos for his *excellent*
work!!

It's not in the main BitlBee and it'll never be for various reasons, but
because it's a plugin that shouldn't be a problem.
____

One day I browsed the BitlBee bugtracker and found
http://bugs.bitlbee.org/bitlbee/ticket/82[this] ticket. Then after a while I
returned and saw that it was still open. So I wrote it.

It's pretty stable (one day I wanted to restart it because of an upgrade
and just noticed it was running for 2+ months without crashing), I use
it for my daily work. Being a plug-in, no patching is required, you can
just install it after installing BitlBee itself.

NOTE: You will see that this implementation of the Skype plug-in still requires
a Skype instance to be running. This is because I'm not motivated to reverse
engineer Skype's
http://en.wikipedia.org/wiki/Skype_Protocol#Obfuscation_Layer[obfuscation
layer]. (Not mentioning that you should ask your lawyer about if it is legal or
not..)

== Requirements

* Skype >= 1.4.0.99. The latest version I've tested is 2.1.0.81.
* BitlBee >= 1.2.6. The lastest version I've tested is @BITLBEE_VERSION@. Use
  old versions (see the NEWS file about which one) if you have older BitlBee
  installed.
* Skype4Py >= 0.9.28.7. Previous versions won't work due to API changes.
  The latest version I've tested is 1.0.32.0.

* Python >= 2.5. Skype4Py does not work with 2.4.
* PyGObject >= 2.8.0. Older versions are part of PyGTK. (And you don't want to
  install GTK for nothing, right?)

`bitlbee-skype` has been tested under Linux and Mac OS X. The plugin part has
been tested under NetBSD and FreeBSD as well. Skype and Skype4py is available
under Windows, too, so it probably works, but this has not been tested.

== How to set it up

Before you start. The setup is the following: BitlBee can't connect directly to
Skype servers (the company's ones). It needs a running Skype client to do so.
In fact BitlBee will connect to `skyped` (a tcp server, provided in this
package) and `skyped` will connect to to your Skype client.

The benefit of this architecture is that you can run Skype and `skyped`
on a machine different to the one where you run BitlBee (it can be even
a public server) and/or your IRC client.

NOTE: The order is important. First `skyped` starts Skype. Then `skyped`
connects to Skype, finally BitlBee can connect to `skyped`.

=== Installing under Frugalware or Debian

- Install the necessary packages:

----
# pacman-g2 -S bitlbee-skype
----

or

----
# apt-get install skyped bitlbee-plugin-skype
----

(the later from the unstable repo)

and you don't have to compile anything manually.

=== Installing under OS X

- Install the necessary packages from ports:

NOTE: You have to edit the Portfile manually to include the install-dev target,
just append install-dev after install-etc.

----
# port -v install bitlbee
# port -v install py25-gobject
----

and you have to install `bitlbee-skype` and `skype4py` from
source.

=== Installing from source

NOTE: bitlbee-skype by default builds and installs skyped and the
plugin. In case you just want to install the plugin for a public server
or you want to use skyped with a public server (like
`bitlbee1.asnetinc.net`), you don't need both.

- You need the latest stable BitlBee release (unless you want to use a
  public server):

----
$ wget http://get.bitlbee.org/src/bitlbee-@BITLBEE_VERSION@.tar.gz
$ tar xf bitlbee-@BITLBEE_VERSION@.tar.gz
$ cd bitlbee-@BITLBEE_VERSION@
----

- Now compile and install it:

----
$ ./configure
$ make
# make install install-dev
----

- To install http://skype4py.sourceforge.net/[Skype4Py] from source
  (unless you want to install the plugin for a public server):

----
$ tar -zxvf Skype4Py-x.x.x.x.tar.gz
$ cd Skype4Py-x.x.x.x
# python setup.py install
----

- Get the plugin code (in an empty dir, or whereever you want, it does
  not matter):

----
$ wget http://vmiklos.hu/project/bitlbee-skype/bitlbee-skype-@VERSION@.tar.gz
$ tar xf bitlbee-skype-@VERSION@.tar.gz
$ cd bitlbee-skype-@VERSION@
----

- Compile and install it:

----
$ ./configure
$ make
# make install
----

This will install the plugin to where BitlBee expects them, which is
`/usr/local/lib/bitlbee` if you installed BitlBee from source.

=== Configuring

- Set up `~/.skyped/skyped.conf`: Create the `~/.skyped` directory, copy
  `skyped.conf` and `skyped.cnf` from
  `/usr/local/etc/skyped/skyped.conf` to `~/.skyped`, adjust `username`
  and `password`. The `username` should be your Skype login and the
  `password` can be whatever you want, but you will have to specify that
  one when adding the Skype account to BitlBee (see later).

NOTE: Here, and later - `/usr/local/etc` can be different on your installation
if you used the `--sysconfdir` switch when running bitlbee-skype's `configure`.

- Generate the SSL pem files:

----
# cd ~/.skyped
# openssl req -new -x509 -days 365 -nodes -config skyped.cnf -out skyped.cert.pem \
        -keyout skyped.key.pem
----

NOTE: Maybe you want to adjust the permissions in the `~/.skyped`
dir. For example make it readable by just your user.

TIP: In case you have difficulties generating `skyped.cert.pem` /
`skyped.key.pem` and you just want to experiment, you can copy&paste the
contents of those files from
http://code.google.com/p/gdata-python-client/source/browse/src/gdata/oauth/rsa.py#87[here].

- Start `skyped` (the tcp server):

----
$ skyped
----

- Start your `IRC` client, connect to BitlBee and add your account:

----
account add skype <user> <pass>
account skype set server localhost
----

<user> should be your Skype account name, <pass> should be the one you declared
in `skyped.conf`. If you want to run skyped on a remote machine, replace
`localhost` with the name of the machine.

If you are running skyped on a custom port:

----
account skype set port <port>
----

If you want to set your full name (optional):

----
account skype set display_name "John Smith"
----

If you want to see your skypeout contacts online as well (they are
offline by default):

----
account skype set skypeout_offline false
----

== Setting up Skype in a VNC server (optional)

Optionally, if you want to run Skype on a server, you might want to setup up
a `VNC` server as well. I used `tightvnc` but probably other `VNC` servers will
work, too.

First run

----
$ vncpasswd ~/.vnc/passwd
----

and create a password. You will need it at least once.

Now create `~/.vnc/xstartup` with the following contents:

----
#!/bin/sh

blackbox
----

Adjust the permissions:

----
$ chmod +x ~/.vnc/xstartup
----

Then start the server:

----
$ vncserver
----

Then connect to it, start an `xterm`, set up Skype (username, password,
enable X11 API and allow the `Skype4Py` client), quit from Skype, and
start `skyped`. If you want to watch its traffic, enable debug messages
and foreground mode:

----
$ skyped -n -d
----

== Features

- Download nicks and away statuses from Skype

- Noticing joins / parts while we're connected

- Sending messages

- Receiving messages

- Receiving away status changes

- `skyped` (the tcp daemon that is a gateway between Skype and tcp)

- Error handling when `skyped` is not running and when it exits

- Marking received messages as seen so that Skype won't say there are unread messages

- Adding / removing contacts

- Set away state when you do a `/away`.

- When you `account off`, Skype will set status to `Offline`

- When you `account on`, Skype will set status to `Online`

- Detect when somebody wants to add you and ask for confirmation

- Detect when somebody wants to transfer a file

- Group chat support:

  * Detect if we're invited

  * Send / receive group chat messages

  * Invite others (using `/invite <nick>`)

  * Part from group chats

  * Starting a group chat (using `/j #nick`)

- Topic changes in group chats:

  * Show the current topic (if any) on join

  * Notice when someone changes the topic

  * Support changing the topic using `/topic`

- Viewing the profile using the `info` command.

- Handling skype actions (when the `CHATMESSAGE` has `EMOTED` type)

- Setting your display name using the `nick` command.

- Running Skype on a machine different to BitlBee is possible, the
  communication is encrypted.

- Managing outgoing calls (with call duration at the end, including
  SkypeOut calls if you use a phone number instead of a nick):

  * `account skype set call nick`
  * `account skype set -del skype/call`

- Managing incoming calls via questions, just like when you add / remove
  contacts.

- Querying the current SkypeOut balance:

  * `account skype set balance query`

- For debug purposes, it's possible to send any command to `skyped`. To
  achieve this, you need to:

  * `account skype set skypeconsole true`

  * then writing `skypeconsole: <command>` will work in the control
    channel.

  * `account skype set skypeconsole_receive true` will make the
    `skypeconsole` account dump all the recieved raw traffic for you

- If you want to automatically join bookmarked groupchats right after
  you logged in, do:

  * `account skype set auto_join true`

- Edited messages are shown with the `EDIT:` prefix. If you don't like
  this, you can set your own prefix using:

  * `account skype set edit_prefix "updated message:"`

- The `echo123` test account is hidden by default. If you want to see it:

  * `account skype set test_join true`

- Mood texts are not shown by default. If you want to see it:

  * `account skype set show_moods true`

== What needs to be done (aka. TODO)

- Notice if foo invites bar. Currently you can see only that bar joined.

- Public chats. See
  link:https://developer.skype.com/jira/browse/SCL-381[this feature
  request], this is because it is still not possible (under Linux) to
  `join_chat` to a public chat..

- Add yasrd (Yet Another Skype-Related Daemon) to allow using a public
  server for users who are behind NAT.

== I would like to have support for ...

If something does not work and it's not in the TODO section, then please
contact me! Please also try the link:HACKING[git version] before reporting a bug, your
problem may be already fixed there.

In fact, of course, I wrote this documentation after figured out how to do this
setup, so maybe I left out some steps. If you needed 'any' additional tricks,
then it would be nice to include them here.

== Known bugs

- File transfers are view-only from BitlBee. Quoting the
  https://developer.skype.com/Docs/ApiDoc/FILETRANSFER_object[relevant
  documentation]: 'File transfers cannot be initiated nor accepted via
  API commands.' So it's not something I can add support for, sadly.

== Screenshots

You can reach some screenshots link:shot[here].

== Additional resources

You can reach the Changelog link:Changelog[here], and a gitweb interface
http://vmiklos.hu/gitweb/?p=bitlbee-skype.git[here].

The Skype API documentation is
http://developer.skype.com/resources/public_api_ref.zip[here] if you're
interested.


== Testimonials

----
00:56 < scathe> I like your skype plugin :)
----

----
It's really working great so far.

Good Job and thank you!
Sebastian
----

----
Big respect for your work, i really appreciate it.

Martin
----

----
Thanks for bitlbee-skype. As a blind Linux user, I cannot use the
skype GUI client because qt apps ar not accessible yet with the
available screen readers. bitlbee-skype allows me to make use of skype
without having to interact much with the GUI client, which helps me a
lot.

Lukas
----

----
02:12 < newton> i must say, i love this little bee ;)
02:15 < newton> tried it out today with the skype plugin, good work!
----

----
18:10 < miCSu> it works fine
----

----
13:56 < seo> i just want to thank you :)
13:56 < seo> for bitlbee-skype
13:57 < seo> it's working very well, so, again, thank you for your work, and for sharing it
----

----
22:16 < ecraven> vmiklos: thanks a lot for the skype plugin for bitlbee!
----

----
I'm blind and so I have to use a screen reader, in my case Gnome-Orca.
But since Skype is written in QT, while Orca uses gtk+, I have no direct
access to the Skype interface. That's why I desided to use Skyped and
Erc.
The text console is fully accessible.
Thank you very much.

Hermann
----

----
i love that bitlbeeplugin. big thx for that.

michael
----

----
23:47 < krisfremen> thanks for creating this fabulous piece of software vmiklos :)
----

== Thanks

to the following people:

* Wilmer van der Gaast, for answering questions about the BitlBee plugin interface

* Arkadiusz Wahlig, author of skype4py, for making suggestions to skyped

* Gabor Adam Toth (tg), for noticing extra code is needed to handle multiline
  messages

* Cristobal Palmer (tarheelcoxn), for helping to testing the plugin in a
  timezone different to mine

* Risko Gergely, for his SkypeOut ideas

* people on `#bitlbee` for feedback

Back to my link:/projects[projects page].

// vim: ft=asciidoc