source: doc/user-guide/user-guide.txt @ 7b23afd

BitlBee User Guide

Jelmer Vernooij

Wilmer van der Gaast

Sjoerd Hemminga

This is the initial release of the BitlBee User Guide.

Permission is granted to copy, distribute and/or modify this document under the
terms of the GNU Free Documentation License, Version 1.1 or any later version
published by the Free Software Foundation with no Invariant Sections, no
Front-Cover Texts, and no Back-Cover Texts. You may obtain a copy of the GNU
Free Documentation License from the Free Software Foundation by visiting their
Web site or by writing to: Free Software Foundation, Inc., 59 Temple Place -
Suite 330, Boston, MA 02111-1307, USA.

-------------------------------------------------------------------------------

Table of Contents

1. Installation

    Downloading the package
    Compiling
    Configuration

2. Usage

    Connecting to the server
    The #bitlbee control channel
    Talking to people

3. Support

    BitlBee is beta software
    Support channels

        The World Wide Web
        IRC
        Mailinglists

4. Quickstart

    Add and Connect To your IM Account(s)
    Managing Contact Lists: Rename
    Step Four: Managing Contact Lists: Add and Remove.
    Chatting
    Further Resources

5. Bitlbee commands

    account - IM-account list maintenance

        account add
        account del
        account on
        account off
        account list

    add - Add a buddy to your contact list
    info - Request user information
    remove - Remove a buddy from your contact list
    block - Block someone
    allow - Unblock someone
    set - Miscellaneous settings
    help - BitlBee help system
    save - Save your account data
    charset
    private
    save_on_quit
    html
    debug
    to_char
    typing_notice
    ops
    away_devoice
    handle_unknown
    auto_connect
    auto_reconnect
    auto_reconnect_delay
    buddy_sendbuffer
    buddy_sendbuffer_delay
    default_target
    display_namechanges
    password
    query_order
    lcnicks
    rename - Rename (renick) a buddy
    yes - Accept a request
    no - Deny a request
    qlist - List all the unanswered questions root asked
    register - Register yourself
    identify - Identify yourself with your password
    drop - Drop your account
    blist - List all the buddies in your contact list
    nick - Change friendly name, nick
    import_buddies - Copy local buddy list to server (normally only needed when
        upgrading)

6. Misc Stuff

    Smileys
    Groupchats
    Creating groupchats
    Groupchat channel names
    Away states

Chapter 1. Installation

Table of Contents

Downloading the package
Compiling
Configuration

Downloading the package

The latest BitlBee release is always available from http://www.bitlbee.org/.
Download the package with your favorite program and unpack it: tar xvfz
bitlbee-<version>.tar.gz where <version> is to be replaced by the version
number of the BitlBee you downloaded (e.g. 0.91).

Compiling

BitlBee's build system has to be configured before compiling. The configure
script will do this for you. Just run it, it'll set up with nice and hopefully
well-working defaults. If you want to change some settings, just try ./
configure --help and see what you can do.

Some variables that might be of interest to the normal user:

  * prefix, bindir, etcdir, mandir, datadir - The place where all the BitlBee
    program files will be put. There's usually no reason to specify them all
    separately, just specifying prefix (or keeping the default /usr/local/)
    should be okay.

  * config - The place where BitlBee will save all the per-user settings and
    buddy information. /var/lib/bitlbee/ is the default value.

  * msn, jabber, oscar, yahoo - By default, support for all these IM-protocols
    (OSCAR is the protocol used by both ICQ and AIM) will be compiled in. To
    make the binary a bit smaller, you can use these options to leave out
    support for protocols you're not planning to use.

  * debug - Generate an unoptimized binary with debugging symbols, mainly
    useful if you want to do some debugging or help us to track down a problem.

  * strip - By default, unnecessary parts of the generated binary will be
    stripped out to make it as small as possible. If you don't want this
    (because it might cause problems on some platforms), set this to 0.

  * flood - To secure your BitlBee server against flooding attacks, you can use
    this option. It's not compiled in by default because it needs more testing
    first.

  * ssl - The MSN and Jabber modules require an SSL library for some of their
    tasks. BitlBee can use three different SSL libraries: GnuTLS, mozilla-nss
    and OpenSSL. (OpenSSL is, however, a bit troublesome because of licensing
    issues, so don't forget to read the information configure will give you
    when you try to use OpenSSL!) By default, configure will try to detect
    GnuTLS or mozilla-nss. If none of them can be found, it'll give up. If you
    want BitlBee to use OpenSSL, you have to explicitly specify that.

After running configure, you should run make. After that, run make install as
root.

Configuration

By default, BitlBee runs as the user nobody. You might want to run it as a
seperate user (some computers run named or apache as nobody).

Since BitlBee uses inetd, you should add the following line to /etc/inetd.conf:

6667    stream  tcp     nowait nobody /usr/local/sbin/bitlbee bitlbee

Inetd has to be restarted after changing the configuration. Either killall -HUP
inetd or /etc/init.d/inetd restart should do the job on most systems.

You might be one of the.. ehr, lucky people running an xinetd-powered distro.
xinetd is quite different and they seem to be proud of that.. ;-) Anyway, if
you want BitlBee to work with xinetd, just copy the bitlbee.xinetd file to your
/etc/xinetd.d/ directory (and probably edit it to suit your needs).

You should create a directory where BitlBee can store it's data files. This
should be the directory named after the value 'CONFIG' in Makefile.settings.
The default is /var/lib/bitlbee, which can be created with the command mkdir -p
/var/lib/bitlbee. This directory has to be owned by the user that runs bitlbee.
To make 'nobody' owner of this directory, run chown nobody /var/lib/bitlbee.
Because things like passwords are saved in this directory, it's probably a good
idea to make this directory owner-read-/writable only.

Chapter 2. Usage

Table of Contents

Connecting to the server
The #bitlbee control channel
Talking to people

Connecting to the server

Since BitlBee acts just like any other irc daemon, you can connect to it with
your favorite irc client. Launch it and connect to localhost port 6667 (or
whatever host/port you are running bitlbee on).

The #bitlbee control channel

Once you are connected to the BitlBee server, you are automatically joined to #
bitlbee on that server. This channel acts like the 'buddy list' you have on the
various other chat networks.

The user 'root' always hangs around in #bitlbee and acts as your interface to
bitlbee. All commands you give on #bitlbee are 'answered' by root.

Talking to people

You can talk to by starting a query with them. In most irc clients, this can be
done with either /msg <nick> <text> or /query <nick>.

To keep the number of open query windows limited, you can also talk to people
in the control channel, like <nick>: <text>.

Chapter 3. Support

Table of Contents

BitlBee is beta software
Support channels

    The World Wide Web
    IRC
    Mailinglists

BitlBee is beta software

Although BitlBee has quite some functionality it is still beta. That means it
can crash at any time, corrupt your data or whatever. Don't use it in any
production environment and don't rely on it.

Support channels

The World Wide Web

http://www.bitlbee.org/ is the homepage of bitlbee and contains the most recent
news on bitlbee and the latest releases.

IRC

BitlBee is discussed on #bitlbee on the OFTC IRC network (server:
irc.oftc.net).

Mailinglists

BitlBee doesn't have any mailinglists.

Chapter 4. Quickstart

Table of Contents

Add and Connect To your IM Account(s)
Managing Contact Lists: Rename
Step Four: Managing Contact Lists: Add and Remove.
Chatting
Further Resources

Welcome to BitlBee, your IRC gateway to ICQ, MSN, AOL, Jabber and Yahoo Instant
Messaging Systems.

The center of BitlBee is the control channel, #bitlbee. Two users will always
be there, you (where "you" is the nickname you are using) and the system user,
root.

You need register so that all your IM settings (passwords, contacts, etc) can
be saved on the BitlBee server. It's important that you pick a good password so
no one else can access your account. Register with this password using the
register command: register <password> (without the brackets!).

Be sure to remember your password. The next time you connect to the BitlBee
server you will need to identify <password> so that you will be recognised and
logged in to all the IM services automatically.

When finished, type help quickstart2 to continue.

Add and Connect To your IM Account(s)

Step Two: Add and Connect To your IM Account(s).

To add an account to the account list you will need to use the account add
command: account add <protocol> <username> <password> [<server>].

For instance, suppose you have an ICQ account with UIN 72696705 with password
QuickStart, you would:

< you> account add oscar 72696705 QuickStart login.icq.com
< root> Account successfully added

Other available IM protocols are jabber, msn, and yahoo. Oscar is the protocol
used by ICQ and AOL. For oscar, you need to specify the IM-server as a fourth
argument (for msn and yahoo there is no fourth argument). For AOL Instant
Messenger, the server name is login.oscar.aol.com. For ICQ, the server name is
login.icq.com.

When you are finished adding your account(s) use the account on command to
enable all your accounts, type help quickstart3 to continue.

Managing Contact Lists: Rename

Step Three: Managing Contact Lists: Rename

For most protocols (currently MSN, Jabber, Yahoo and AOL) BitlBee can download
the contact list automatically from the IM server and all the on-line users
should appear in the control channel when you log in.

BitlBee will convert names into irc-friendly form (for instance:
tux@example.com will be given the nickname tux). If you have more than one
person who would have the same name by this logic (for instance:
tux@example.com and tux@bitlbee.org) the second one to log on will be tux_. The
same is true if you have a tux log on to AOL and a tux log on from Yahoo.

It would be easy to get these two mixed up, so BitlBee has a rename command to
change the nickname into something more suitable: rename <oldnick> <newnick>

< you> rename tux_ bitlbeetux
 * tux_is now known as bitlbeetux
< root> Nick successfully changed

When finished, type help quickstart4 to continue.

Step Four: Managing Contact Lists: Add and Remove.

Step Four: Managing Contact Lists: Add and Remove.

Now you might want to add some contacts, to do this we will use the add
command. It needs two arguments: a connection ID (which can be a number (try
account list), protocol name or (part of) the screenname) and the user's
handle. It is used in the following way: add <connection> <handle>

< you> add 0 r2d2@example.com
 * r2d2has joined #bitlbee

In this case r2d2 is online, since he/she joins the channel immediately. If the
user is not online you will not see them join until they log on.

Lets say you accidentally added r2d3@example.com rather than r2d2@example.com,
or maybe you just want to remove a user from your list because you never talk
to them. To remove a name you will want to use the remove command: remove
<nick>

When finished, type help quickstart5 to continue.

Chatting

Step Five: Chatting.

First of all, a person must be on your contact list for you to chat with them
(unless it's a group chat, help groupchats for more). If someone not on your
contact list sends you a message, simply add them to the proper account with
the add command. Once they are on your list and online, you can chat with them
in #bitlbee:

< you> tux: hey, how's the weather down there?
< tux> you: a bit chilly!

If you'd rather chat with them in a separate window use the /msg or /query
command, just like you would for a private message in IRC. If you want to have
messages automatically come up in private messages rather than in the #bitlbee
channel, use the set private command: set private true (set private false to
change back).

You know the basics. If you want to get to know more about BitlBee, please type
help quickstart6.

Further Resources

So you want more than just chatting? Or maybe you're just looking for a
feature?

You can type help set to learn more about the possible BitlBee user settings.
Among these user settings you will find options for common issues, such as
changing the charset, HTML stripping and automatic connecting (simply type set
to see current user settings).

For more subjects (like groupchats and away states), please type help index.

If you're still looking for something, please visit us in #bitlbee on the OFTC
network (you can connect via irc.bitlbee.org), or mail us your problem/
suggestion. Good luck and enjoy the Bee!

Chapter 5. Bitlbee commands

Table of Contents

account - IM-account list maintenance

    account add
    account del
    account on
    account off
    account list

add - Add a buddy to your contact list
info - Request user information
remove - Remove a buddy from your contact list
block - Block someone
allow - Unblock someone
set - Miscellaneous settings
help - BitlBee help system
save - Save your account data
charset
private
save_on_quit
html
debug
to_char
typing_notice
ops
away_devoice
handle_unknown
auto_connect
auto_reconnect
auto_reconnect_delay
buddy_sendbuffer
buddy_sendbuffer_delay
default_target
display_namechanges
password
query_order
lcnicks
rename - Rename (renick) a buddy
yes - Accept a request
no - Deny a request
qlist - List all the unanswered questions root asked
register - Register yourself
identify - Identify yourself with your password
drop - Drop your account
blist - List all the buddies in your contact list
nick - Change friendly name, nick
import_buddies - Copy local buddy list to server (normally only needed when
    upgrading)

account - IM-account list maintenance

Syntax: 

account <action> [<arguments>]

Available actions: add, del, list, on, off. See help account <action> for more
information.

account add

Syntax: 

account add <protocol> <username> <password> [<server>]

Adds an account on the given server with the specified protocol, username and
password to the account list. Supported protocols right now are: Jabber, MSN,
OSCAR (AIM/ICQ) and Yahoo. For more information about adding an account, see
help account add <protocol>.

account add jabber

Syntax: 

account add jabber <handle> <password> [<servertag>]

Note that the servertag argument is optional. You only have to use it if the
part after the @ in your handle isn't the hostname of your Jabber server, or if
you want to use SSL/connect to a non-standard port number. The format is
simple: [<servername>[:<portnumber>][:ssl]]. For example, this is how you can
connect to Google Talk:

Note that Google talk is SSL-only, but officially reachable over both port 5222
and 5223. However, for some people only port 5222 works, for some people only
5223. This is something you'll have to try out.

< wilmer> account add jabber example@gmail.com hobbelmeeuw talk.google.com:5223:ssl
< root> Account successfully added

account add msn

Syntax: 

account add msn <handle> <password>

For MSN connections there are no special arguments.

account add oscar

Syntax: 

account add oscar <handle> <password> [<servername>]

Specifying a server is required for OSCAR, since OSCAR can be used for both
ICQ- and AIM-connections. Although these days it's supposed to be possible to
connect to ICQ via AIM-servers and vice versa, we like to stick with this
separation for now. For ICQ connections, the servername is login.icq.com, for
AIM connections it's login.oscar.aol.com.

< wilmer> account add oscar 72696705 hobbelmeeuw login.icq.com
< root> Account successfully added

account add yahoo

Syntax: 

account add yahoo <handle> <password>

For Yahoo! connections there are no special arguments.

account del

Syntax: 

account del <account id>

This commands deletes an account from your account list. You should signoff the
account before deleting it.

The account ID can be a number (see account list), the protocol name or (part
of) the screenname, as long as it matches only one connection.

account on

Syntax: 

account on [<account id>]

This command will try to log into the specified account. If no account is
specified, BitlBee will log into all the accounts. (Including accounts awaiting
a reconnection)

The account ID can be a number (see account list), the protocol name or (part
of) the screenname, as long as it matches only one connection.

account off

Syntax: 

account off [<account id>]

This command disconnects the connection for the specified account. If no
account is specified, BitlBee will deactivate all active accounts. (Including
accounts awaiting a reconnection)

The account ID can be a number (see account list), the protocol name or (part
of) the screenname, as long as it matches only one connection.

account list

Syntax: 

account list

This command gives you a list of all the accounts known by BitlBee, including
the numbers you'll need for most account commands.

add - Add a buddy to your contact list

Syntax: 

add <connection> <handle> [<nick>]

Adds the given buddy at the specified connection to your buddy list. The
account ID can be a number (see account list), the protocol name or (part of)
the screenname, as long as it matches only one connection.

If you want, you can also tell BitlBee what nick to give the new contact. Of
course you can also use the rename command for that, but sometimes this might
be more convenient.

< ctrlsoft> add 3 gryp@jabber.org grijp
 * grijphas joined #bitlbee

info - Request user information

Syntax: 

info <connection> <handle>
info <nick>

Requests IM-network-specific information about the specified user. The amount
of information you'll get differs per protocol. For some protocols (ATM Yahoo!
and MSN) it'll give you an URL which you can visit with a normal web browser to
get the information.

< ctrlsoft> info 0 72696705
< root> User info - UIN: 72696705 Nick: Lintux First/Last name: Wilmer van der Gaast E-mail: lintux@lintux.cx

remove - Remove a buddy from your contact list

Syntax: 

remove <nick>

Removes the specified nick from your buddy list.

< ctrlsoft> remove gryp
 * gryphas quit [Leaving...]

block - Block someone

Syntax: 

block <nick>
block <connection> <handle>

Puts the specified user on your ignore list. Either specify the user's nick
when you have him/her in your contact list or a connection number and a user
handle.

allow - Unblock someone

Syntax: 

allow <nick>
allow <connection> <handle>

Reverse of block. Unignores the specified user or user handle on specified
connection.

set - Miscellaneous settings

Syntax: 

set [<variable> [<value>]]

Without any arguments, this command lists all the set variables. You can also
specify a single argument, a variable name, to get that variable's value. To
change this value, specify the new value as the second argument.

To get more help information about a setting, try:

< ctrlsoft> help set private

help - BitlBee help system

Syntax: 

help [subject]

This command gives you the help information you're reading right now. If you
don't give any arguments, it'll give a short help index.

save - Save your account data

Syntax: 

save

This command saves all your nicks and accounts immediately. Handy if you have
the autosave functionality disabled, or if you don't trust the program's
stability... ;-)

charset

Type: string

The charset setting enables you to use different character sets in BitlBee.
These get converted to UTF-8 before sending and from UTF-8 when receiving.

If you don't know what's the best value for this, at least iso8859-1 is the
best choice for most Western countries. You can try to find what works best for
you on http://czyborra.com/charsets/iso8859.html

private

Type: boolean

If value is true, messages from users will appear in separate query windows. If
false, messages from users will appear in the control channel.

This setting is remembered (during one session) per-user, this setting only
changes the default state. This option takes effect as soon as you reconnect.

save_on_quit

Type: boolean

If enabled causes BitlBee to save all current settings and account details when
user disconnects. This is enabled by default, and these days there's not really
a reason to have it disabled anymore.

html

Type: string

Determines what BitlBee should do with HTML in messages. If set to nostrip,
HTML in messages will not be touched. If set to strip, all HTML will be
stripped from messages. Unfortunately this sometimes strips too much.

debug

Type: boolean

Some debugging messages can be sent to the control channel if you wish. They're
probably not really useful for you, unless you're doing some development on
BitlBee.

to_char

Type: string

It's customary that messages meant for one specific person on an IRC channel
are prepended by his/her alias followed by a colon ':'. BitlBee does this by
default. If you prefer a different character, you can set it using set to_char.

Please note that this setting is only used for incoming messages. For outgoing
messages you can use ':' (colon) or ',' to separate the destination nick from
the message, and this is not configurable.

typing_notice

Type: boolean

Sends you a /notice when a user starts typing a message (if the protocol
supports it, MSN for example). This is a bug, not a feature. (But please don't
report it.. ;-) You don't want to use it. Really. In fact the
typing-notification is just one of the least useful 'innovations' ever. It's
just there because some guy will probably ask me about it anyway. ;-)

ops

Type: string

Some people prefer themself and root to have operator status in #bitlbee, other
people don't. You can change these states using this setting.

The value "both" means both user and root get ops. "root" means, well, just
root. "user" means just the user. "none" means nobody will get operator status.

away_devoice

Type: boolean

With this option enabled, the root user devoices people when they go away (just
away, not offline) and gives the voice back when they come back. You might
dislike the voice-floods you'll get if your contact list is huge, so this
option can be disabled.

handle_unknown

Type: string

Messages from unknown users are echoed like this by default:

If you want this lame user to be added automatically, you can set this setting
to "add". If you prefer to ignore messages from people you don't know, you can
set this one to "ignore". "add_private" and "add_channel" are like add, but you
can use them to make messages from unknown buddies appear in the channel
instead of a query window.

auto_connect

Type: boolean

With this option enabled, when you identify BitlBee will automatically connect
to your accounts, with this disabled it will not do this.

auto_reconnect

Type: boolean

If an IM-connections breaks, you're supposed to bring it back up yourself.
Having BitlBee do this automatically might not always be a good idea, for
several reasons. If you want the connections to be restored automatically, you
can enable this setting.

See also the auto_reconnect_delay setting.

auto_reconnect_delay

Type: integer

Tell BitlBee after how many seconds it should attempt to bring an IM-connection
back up after a crash. It's not a good idea to set this value very low, it will
cause too much useless traffic when an IM-server is down for a few hours.

See also the auto_reconnect setting.

buddy_sendbuffer

Type: boolean

By default, when you send a message to someone, BitlBee forwards this message
to the user immediately. When you paste a large number of lines, the lines will
be sent in separate messages, which might not be very nice to read. If you
enable this setting, BitlBee will buffer your messages and wait for more data.

Using the buddy_sendbuffer_delay setting you can specify the number of seconds
BitlBee should wait for more data before the complete message is sent.

Please note that if you remove a buddy from your list (or if the connection to
that user drops) and there's still data in the buffer, this data will be lost.
BitlBee will not try to send the message to the user in those cases.

buddy_sendbuffer_delay

Type: integer

Tell BitlBee after how many seconds a buffered message should be sent.

See also the buddy_sendbuffer setting.

default_target

Type: string

With this value set to root, lines written in the control channel without any
nickname in front of them will be interpreted as commands. If you want BitlBee
to send those lines to the last person you addressed in the control channel,
set this to last.

display_namechanges

Type: boolean

password

Type: string

Use this setting to change your "NickServ" password.

query_order

Type: string

This changes the order in which the questions from root (usually authorization
requests from buddies) should be answered. When set to lifo, BitlBee
immediately displays all new questions and they should be answered in reverse
order. When this is set to fifo, BitlBee displays the first question which
comes in and caches all the others until you answer the first one.

Although the fifo setting might sound more logical (and used to be the default
behaviour in older BitlBee versions), it turned out not to be very convenient
for many users when they missed the first question (and never received the next
ones).

lcnicks

Type: boolean

Hereby you can change whether you want all lower case nick names or leave the
case as it intended by your peer.

rename - Rename (renick) a buddy

Syntax: 

rename <oldnick> <newnick>

Renick a user in your buddy list. Very useful, in fact just very important, if
you got a lot of people with stupid account names (or hard ICQ numbers).

< itsme> rename itsme_ you
 * itsme_is now known as you

yes - Accept a request

Syntax: 

yes [<number>]

Sometimes an IM-module might want to ask you a question. (Accept this user as
your buddy or not?) To accept a question, use the yes command.

By default, this answers the first unanswered question. You can also specify a
different question as an argument. You can use the qlist command for a list of
questions.

no - Deny a request

Syntax: 

no [<number>]

Sometimes an IM-module might want to ask you a question. (Accept this user as
your buddy or not?) To reject a question, use the no command.

By default, this answers the first unanswered question. You can also specify a
different question as an argument. You can use the qlist command for a list of
questions.

qlist - List all the unanswered questions root asked

Syntax: 

qlist

This gives you a list of all the unanswered questions from root.

register - Register yourself

Syntax: 

register <password>

BitlBee can save your settings so you won't have to enter all your IM passwords
every time you log in. If you want the Bee to save your settings, use the
register command.

Please do pick a secure password, don't just use your nick as your password.
Please note that IRC is not an encrypted protocol, so the passwords still go
over the network in plaintext. Evil people with evil sniffers will read it all.
(So don't use your root password.. ;-)

To identify yourself in later sessions, you can use the identify command.

identify - Identify yourself with your password

Syntax: 

identify <password>

BitlBee saves all your settings (contacts, accounts, passwords) on-server. To
prevent other users from just logging in as you and getting this information,
you'll have to identify yourself with your password. You can register this
password using the register command.

Once you're registered, you can change your password using set password
<password>.

drop - Drop your account

Syntax: 

drop <password>

Drop your BitlBee registration. Your account files will be removed and your
password will be forgotten. For obvious security reasons, you have to specify
your NickServ password to make this command work.

blist - List all the buddies in your contact list

Syntax: 

blist [all|online|offline|away]

You can get a better readable buddy list using the blist command. If you want a
complete list (including the offline users) you can use the all argument.

nick - Change friendly name, nick

Syntax: 

nick <connection> [<new nick>]
nick

This command allows to set the friendly name of an im account. If no new name
is specified the command will report the current name. When the name contains
spaces, don't forget to quote the whole nick in double quotes. Currently this
command is only supported by the MSN protocol.

< wouter> nick 1 "Wouter Paesen"
< root> Setting your name on connection 1 to `Wouter Paesen'

import_buddies - Copy local buddy list to server (normally only needed when
upgrading)

Syntax: 

import_buddies <connection> [clear]

This command copies the locally stored buddy list to the server. This command
exists for upgrading purposes. Previous versions of BitlBee didn't support
server-side buddy lists for ICQ, so the list was stored locally.

Since version 0.91 however, server-side contact lists are supported for all
protocols, so the local list is now ignored. When upgrading from an older
BitlBee to version 0.91, you might need this command to get your buddy list
back.

The only argument this command needs is your ICQ account identification. If
your serverside buddy list contains some old buddies you don't want anymore,
you can pass clear as a second argument.

After giving this command, you have to wait for a while before all the adds are
handled, because of ICQ's rate limiting. If your buddy list is very large and
the ICQ server starts complaining, you might have to reconnect and enter this
command again.

Chapter 6. Misc Stuff

Table of Contents

Smileys
Groupchats
Creating groupchats
Groupchat channel names
Away states

Smileys

All MSN smileys (except one) are case insensitive and work without the nose
too.

(Y)

    Thumbs up

(N)

    Thumbs down

(B)

    Beer mug

(D)

    Martini glass

(X)

    Girl

(Z)

    Boy

(6)

    Devil smiley

:-[

    Vampire bat

(})

    Right hug

({)

    Left hug

(M)

    MSN Messenger or Windows Messenger icon (think a BitlBee logo here ;)

:-S

    Crooked smiley (Confused smiley)

:-$

    Embarrassed smiley

(H)

    Smiley with sunglasses

:-@

    Angry smiley

(A)

    Angel smiley

(L)

    Red heart (Love)

(U)

    Broken heart

(K)

    Red lips (Kiss)

(G)

    Gift with bow

(F)

    Red rose

(W)

    Wilted rose

(P)

    Camera

(~)

    Film strip

(T)

    Telephone receiver

(@)

    Cat face

(&)

    Dog's head

(C)

    Coffee cup

(I)

    Light bulb

(S)

    Half-moon (Case sensitive!)

(*)

    Star

(8)

    Musical eighth note

(E)

    Envelope

(^)

    Birthday cake

(O)

    Clock

This list was extracted from http://help.msn.com/!data/en_us/data/
messengerv50.its51/$content$/EMOTICONS.HTM?H_APP=.

Groupchats

Since version 0.8x, BitlBee supports groupchats on the MSN and Yahoo! networks.
This text will try to explain you how they work.

As soon as someone invites you into a groupchat, you will be force-joined or
invited (depending on the protocol) into a new virtual channel with all the
people in there. You can leave the channel at any time, just like you would
close the window in regular IM clients. Please note that root-commands don't
work in groupchat channels, they only work in the control channel (or to root
directly).

Of course you can also create your own groupchats. Type help groupchats2 to see
how.

Creating groupchats

If you want to start a groupchat with the person jim_msn in it, just join the
channel #jim_msn. BitlBee will refuse to join you to the channel with that
name, but it will create a new virtual channel with root, you and jim_msn in
it.

Of course a channel with only two people isn't really exciting yet. So the next
step is to invite some other people to the channel. For this, you can use the /
invite command of your IRC client. Please do keep in mind that all the people
have to be on the same network and contact list! You can't invite Yahoo!
buddies into an MSN groupchat.

This is all you'll probably need to know. If you have any problems, please read
help groupchats3.

Groupchat channel names

Obviously the (numbered) channel names don't make a lot of sense. Problem is
that groupchats usually don't have names at all in the IM-world, while IRC
insists on a name. So BitlBee just generates something random, just don't pay
attention to it. :-)

Please also note that BitlBee doesn't support groupchats for all protocols yet.
BitlBee will tell you so. Support for other protocols will hopefully come
later.

Away states

As you might've expected, you can just use the /away command in your IRC client
to set an away-state. BitlBee supports most away-states supported by the
protocols.

Not all away states are supported by all protocols, and some protocols have
different names for them. BitlBee will try to pick the best available alias
from this list for every connection:

Away from computer, Away, Extended away
NA, N/A, Not available
Busy, Do not disturb, DND, Occupied
Be right back, BRB
On the phone, Phone, On phone
Out to lunch, Lunch, Food

So /away Food will set your state to "Out to lunch" on your MSN connection, and
for most other connections the default, "Away" or "Away from computer" will be
chosen.

You can also add more information to your away message. Setting it to "Busy -
Fixing BitlBee bugs" will set your IM-away-states to Busy, but your away
message will be more descriptive for people on IRC. Protocols like Yahoo! and
Jabber will also show this complete away message to your buddies.