source: doc/user-guide/help.txt @ c92e6801

Last change on this file since c92e6801 was b7d3cc34, checked in by Wilmer van der Gaast <wilmer@…>, at 2005-11-06T18:23:18Z

Initial repository (0.99 release tree)

  • Property mode set to 100644
File size: 26.9 KB
Line 
1?
2These are the available help subjects:
3
4 quickstart - A short introduction into BitlBee
5 commands - All available commands and settings
6 away - About setting away states
7 smileys - A summary of some non-standard smileys you might find and fail to understand
8 groupchats - How to work with groupchats on BitlBee
9
10You can read more about them with help <subject>
11
12BitlBee is written by Wilmer van der Gaast together with Jelmer Vernooij, Maurits Dijkstra and others. Bug reports and other kinds of feedback can be sent by e-mail to wilmer@gaast.net. (There is no BitlBee mailing list)
13
14Or just join #BitlBee on OFTC (irc.oftc.net) (OFTC, *not* FreeNode! Some people accidentally joined #BitlBee on FreeNode already, which is just an empty channel) and flame us right in the face. :-)
15%
16?index
17These are the available help subjects:
18
19 quickstart - A short introduction into BitlBee
20 commands - All available commands and settings
21 away - About setting away states
22 smileys - A summary of some non-standard smileys you might find and fail to understand
23 groupchats - How to work with groupchats on BitlBee
24
25You can read more about them with help <subject>
26%
27?quickstart
28Welcome to BitlBee, your IRC gateway to ICQ, MSN, AOL, Jabber and Yahoo Instant Messaging Systems.
29
30The center of BitlBee is the control channel, #bitlbee. Two users will always be there, you (where "you" is the nickname you are using) and the system user, root.
31
32You need register so that all your IM settings (passwords, contacts, etc) can be saved on the BitlBee server. It's important that you pick a good password so no one else can access your account. Register with this password using the register command: register <password> (without the brackets!).
33
34Be sure to remember your password. The next time you connect to the BitlBee server you will need to identify <password> so that you will be recognised and logged in to all the IM services automatically.
35
36When finished, type help quickstart2 to continue.
37%
38?quickstart2
39Step Two: Add and Connect To your IM Account(s).
40
41To add an account to the account list you will need to use the account add command: account add <protocol> <username> <password> [<server>].
42
43For instance, suppose you have an ICQ account with UIN 72696705 with password QuickStart, you would:
44
45<you> account add oscar 72696705 QuickStart login.icq.com
46<root> Account successfully added
47
48Other available IM protocols are jabber, msn, and yahoo. Oscar is the protocol used by ICQ and AOL. For oscar, you need to specify the IM-server as a fourth argument (for msn and yahoo there is no fourth argument). For AOL Instant Messenger, the server name is login.oscar.aol.com. For ICQ, the server name is login.icq.com.
49
50When you are finished adding your account(s) use the account on command to enable all your accounts, type help quickstart3 to continue.
51%
52?quickstart3
53Step Three: Managing Contact Lists: Rename
54
55For most protocols (currently MSN, Jabber, Yahoo and AOL) BitlBee can download the contact list automatically from the IM server and all the on-line users should appear in the control channel when you log in.
56
57BitlBee will convert names into irc-friendly form (for instance: tux@example.com will be given the nickname tux). If you have more than one person who would have the same name by this logic (for instance: tux@example.com and tux@bitlbee.org) the second one to log on will be tux_. The same is true if you have a tux log on to AOL and a tux log on from Yahoo.
58
59It would be easy to get these two mixed up, so BitlBee has a rename command to change the nickname into something more suitable: rename <oldnick> <newnick>
60
61<you> rename tux_ bitlbeetux
62* tux_ is now known as bitlbeetux
63<root> Nick successfully changed
64
65When finished, type help quickstart4 to continue.
66%
67?quickstart4
68Step Four: Managing Contact Lists: Add and Remove.
69
70Now you might want to add some contacts, to do this we will use the add command. It needs two arguments: a connection ID (which can be a number (try account list), protocol name or (part of) the screenname) and the user's handle. It is used in the following way: add <connection> <handle>
71
72<you> add 0 r2d2@example.com
73* r2d2  has joined #bitlbee
74
75In this case r2d2 is online, since he/she joins the channel immediately. If the user is not online you will not see them join until they log on.
76
77Lets say you accidentally added r2d3@example.com rather than r2d2@example.com, or maybe you just want to remove a user from your list because you never talk to them. To remove a name you will want to use the remove command: remove <nick>
78
79When finished, type help quickstart5 to continue.
80%
81?quickstart5
82Step Five: Chatting.
83
84First of all, a person must be on your contact list for you to chat with them (unless it's a group chat, help groupchats for more). If someone not on your contact list sends you a message, simply add them to the proper account with the add command. Once they are on your list and online, you can chat with them in #bitlbee:
85
86<you> tux: hey, how's the weather down there?
87<tux>  you: a bit chilly!
88
89If you'd rather chat with them in a separate window use the /msg or /query command, just like you would for a private message in IRC. If you want to have messages automatically come up in private messages rather than in the #bitlbee channel, use the set private command: set private true (set private false to change back).
90
91You know the basics. If you want to get to know more about BitlBee, please type help quickstart6.
92%
93?quickstart6
94So you want more than just chatting? Or maybe you're just looking for a feature?
95
96You can type help set to learn more about the possible BitlBee user settings. Among these user settings you will find options for common issues, such as changing the charset, HTML stripping and automatic connecting (simply type set to see current user settings).
97
98For more subjects (like groupchats and away states), please type help index.
99
100If you're still looking for something, please visit us in #bitlbee on the OFTC network (you can connect via irc.bitlbee.org), or mail us your problem/suggestion. Good luck and enjoy the Bee!
101%
102?commands
103 * account - IM-account list maintenance
104 * add - Add a buddy to your contact list
105 * info - Request user information
106 * remove - Remove a buddy from your contact list
107 * block - Block someone
108 * allow - Unblock someone
109 * set - Miscellaneous settings
110 * help - BitlBee help system
111 * save - Save your account data
112 * rename - Rename (renick) a buddy
113 * yes - Accept a request
114 * no - Deny a request
115 * qlist - List all the unanswered questions root asked
116 * register - Register yourself
117 * identify - Identify yourself with your password
118 * drop - Drop your account
119 * blist - List all the buddies in your contact list
120 * nick - Change friendly name, nick
121 * import_buddies - Copy local buddy list to server (normally only needed when upgrading)
122%
123?account
124Syntax: account <action> [<arguments>]
125
126Available actions: add, del, list, on, off. See help account <action> for more information.
127%
128?account add
129Syntax: account add <protocol> <username> <password> [<server>]
130
131Adds an account on the given server with the specified protocol, username and password to the account list. Supported protocols right now are: Jabber, MSN, OSCAR (AIM/ICQ) and Yahoo. For more information about adding an account, see help account add <protocol>.
132%
133?account add jabber
134Syntax: account add jabber <handle> <password> [<servertag>]
135
136Note that the servertag argument is optional. You only have to use it if the part after the @ in your handle isn't the hostname of your Jabber server, or if you want to use SSL/connect to a non-standard port number. The format is simple: [<servername>[:<portnumber>][:ssl]]. For example, this is how you can connect to Google Talk:
137
138Note that Google talk is SSL-only, but officially reachable over both port 5222 and 5223. However, for some people only port 5222 works, for some people only 5223. This is something you'll have to try out.
139
140Example:
141<wilmer> account add jabber example@gmail.com hobbelmeeuw talk.google.com:5223:ssl
142<root> Account successfully added
143%
144?account add msn
145Syntax: account add msn <handle> <password>
146
147For MSN connections there are no special arguments.
148%
149?account add oscar
150Syntax: account add oscar <handle> <password> [<servername>]
151
152Specifying a server is required for OSCAR, since OSCAR can be used for both ICQ- and AIM-connections. Although these days it's supposed to be possible to connect to ICQ via AIM-servers and vice versa, we like to stick with this separation for now. For ICQ connections, the servername is login.icq.com, for AIM connections it's login.oscar.aol.com.
153
154Example:
155<wilmer> account add oscar 72696705 hobbelmeeuw login.icq.com
156<root> Account successfully added
157%
158?account add yahoo
159Syntax: account add yahoo <handle> <password>
160
161For Yahoo! connections there are no special arguments.
162%
163?account del
164Syntax: account del <account id>
165
166This commands deletes an account from your account list. You should signoff the account before deleting it.
167
168The account ID can be a number (see account list), the protocol name or (part of) the screenname, as long as it matches only one connection.
169%
170?account on
171Syntax: account on [<account id>]
172
173This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts. (Including accounts awaiting a reconnection)
174
175The account ID can be a number (see account list), the protocol name or (part of) the screenname, as long as it matches only one connection.
176%
177?account off
178Syntax: account off [<account id>]
179
180This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts. (Including accounts awaiting a reconnection)
181
182The account ID can be a number (see account list), the protocol name or (part of) the screenname, as long as it matches only one connection.
183%
184?account list
185Syntax: account list
186
187This command gives you a list of all the accounts known by BitlBee, including the numbers you'll need for most account commands.
188%
189?add
190Syntax: add <connection> <handle> [<nick>]
191
192Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see account list), the protocol name or (part of) the screenname, as long as it matches only one connection.
193
194If you want, you can also tell BitlBee what nick to give the new contact. Of course you can also use the rename command for that, but sometimes this might be more convenient.
195
196Example:
197<ctrlsoft> add 3 gryp@jabber.org grijp
198* grijp has joined #bitlbee
199%
200?info
201Syntax: info <connection> <handle>
202Syntax: info <nick>
203
204Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols (ATM Yahoo! and MSN) it'll give you an URL which you can visit with a normal web browser to get the information.
205
206Example:
207<ctrlsoft> info 0 72696705
208<root> User info - UIN: 72696705   Nick: Lintux   First/Last name: Wilmer van der Gaast   E-mail: lintux@lintux.cx
209%
210?remove
211Syntax: remove <nick>
212
213Removes the specified nick from your buddy list.
214
215Example:
216<ctrlsoft> remove gryp
217* gryp has quit [Leaving...]
218%
219?block
220Syntax: block <nick>
221Syntax: block <connection> <handle>
222
223Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
224%
225?allow
226Syntax: allow <nick>
227Syntax: allow <connection> <handle>
228
229Reverse of block. Unignores the specified user or user handle on specified connection.
230%
231?set
232Syntax: set [<variable> [<value>]]
233
234Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument.
235
236To get more help information about a setting, try:
237
238Example:
239<ctrlsoft> help set private
240%
241?help
242Syntax: help [subject]
243
244This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
245%
246?save
247Syntax: save
248
249This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
250%
251?rename
252Syntax: rename <oldnick> <newnick>
253
254Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
255
256Example:
257<itsme> rename itsme_ you
258* itsme_ is now known as you
259%
260?yes
261Syntax: yes [<number>]
262
263Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the yes command.
264
265By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the qlist command for a list of questions.
266%
267?no
268Syntax: no [<number>]
269
270Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the no command.
271
272By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the qlist command for a list of questions.
273%
274?qlist
275Syntax: qlist
276
277This gives you a list of all the unanswered questions from root.
278%
279?register
280Syntax: register <password>
281
282BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the register command.
283
284Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
285
286To identify yourself in later sessions, you can use the identify command.
287%
288?identify
289Syntax: identify <password>
290
291BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the register command.
292
293Once you're registered, you can change your password using set password <password>.
294%
295?drop
296Syntax: drop <password>
297
298Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
299%
300?blist
301Syntax: blist [all|online|offline|away]
302
303You can get a better readable buddy list using the blist command. If you want a complete list (including the offline users) you can use the all argument.
304%
305?nick
306Syntax: nick <connection> [<new nick>]
307Syntax: nick
308
309This command allows to set the friendly name of an im account. If no new name is specified the command will report the current name. When the name contains spaces, don't forget to quote the whole nick in double quotes. Currently this command is only supported by the MSN protocol.
310
311Example:
312<wouter> nick 1 "Wouter Paesen"
313<root> Setting your name on connection 1 to `Wouter Paesen'
314%
315?import_buddies
316Syntax: import_buddies <connection> [clear]
317
318This command copies the locally stored buddy list to the server. This command exists for upgrading purposes. Previous versions of BitlBee didn't support server-side buddy lists for ICQ, so the list was stored locally.
319
320Since version 0.91 however, server-side contact lists are supported for all protocols, so the local list is now ignored. When upgrading from an older BitlBee to version 0.91, you might need this command to get your buddy list back.
321
322The only argument this command needs is your ICQ account identification. If your serverside buddy list contains some old buddies you don't want anymore, you can pass clear as a second argument.
323
324After giving this command, you have to wait for a while before all the adds are handled, because of ICQ's rate limiting. If your buddy list is very large and the ICQ server starts complaining, you might have to reconnect and enter this command again.
325%
326?set charset
327Type: string
328Default: iso8859-1
329Possible Values: you can get a list of all possible values by doing 'iconv -l' in a shell
330
331The charset setting enables you to use different character sets in BitlBee. These get converted to UTF-8 before sending and from UTF-8 when receiving.
332
333If you don't know what's the best value for this, at least iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://czyborra.com/charsets/iso8859.html
334%
335?set private
336Type: boolean
337Default: True
338
339If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel.
340
341This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
342%
343?set save_on_quit
344Type: boolean
345Default: True
346
347If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
348%
349?set html
350Type: string
351Default: nostrip
352Possible Values: strip, nostrip
353
354Determines what BitlBee should do with HTML in messages. If set to nostrip, HTML in messages will not be touched. If set to strip, all HTML will be stripped from messages. Unfortunately this sometimes strips too much.
355%
356?set debug
357Type: boolean
358Default: False
359
360Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
361%
362?set to_char
363Type: string
364Default: ": "
365
366It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using set to_char.
367
368Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
369%
370?set typing_notice
371Type: boolean
372Default: False
373
374Sends you a /notice when a user starts typing a message (if the protocol supports it, MSN for example). This is a bug, not a feature. (But please don't report it.. ;-) You don't want to use it. Really. In fact the typing-notification is just one of the least useful 'innovations' ever. It's just there because some guy will probably ask me about it anyway. ;-)
375%
376?set ops
377Type: string
378Default: both
379Possible Values: both, root, user, none
380
381Some people prefer themself and root to have operator status in #bitlbee, other people don't. You can change these states using this setting.
382
383The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
384%
385?set away_devoice
386Type: boolean
387Default: True
388
389With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
390%
391?set handle_unknown
392Type: string
393Default: root
394Possible Values: root, add, add_private, add_channel, ignore
395
396Messages from unknown users are echoed like this by default:
397
398<root> Unknown message from handle 3137137:
399<root> j0000! 1 4m l33t h4x0r! kill me!
400
401If you want this lame user to be added automatically, you can set this setting to "add". If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
402
403Auto-added users aren't added to your real contact list. This is because you don't want the user to get authorization requests. So when you restart BitlBee, the auto-added user will be gone. If you want to keep the person in your buddy-list, you have to fixate the add using the add command.
404%
405?set auto_connect
406Type: boolean
407Default: True
408
409With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
410%
411?set auto_reconnect
412Type: boolean
413Default: False
414
415If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
416
417See also the auto_reconnect_delay setting.
418%
419?set auto_reconnect_delay
420Type: integer
421Default: 300
422
423Tell BitlBee after how many seconds it should attempt to bring an IM-connection back up after a crash. It's not a good idea to set this value very low, it will cause too much useless traffic when an IM-server is down for a few hours.
424
425See also the auto_reconnect setting.
426%
427?set buddy_sendbuffer
428Type: boolean
429Default: False
430
431By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
432
433Using the buddy_sendbuffer_delay setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
434
435Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
436%
437?set buddy_sendbuffer_delay
438Type: integer
439Default:
440
441Tell BitlBee after how many seconds a buffered message should be sent.
442
443See also the buddy_sendbuffer setting.
444%
445?set default_target
446Type: string
447Default: root
448Possible Values: root, last
449
450With this value set to root, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to last.
451%
452?set display_namechanges
453Type: boolean
454Default: False
455%
456?set password
457Type: string
458Default:
459
460Use this setting to change your "NickServ" password.
461%
462?set query_order
463Type: string
464Default: lifo
465Possible Values: lifo, fifo
466
467This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to lifo, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to fifo, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
468
469Although the fifo setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
470%
471?set lcnicks
472Type: boolean
473Default: True
474
475Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer.
476%
477?misc
478%
479?smileys
480All MSN smileys (except one) are case insensitive and work without the nose too.
481
482 (Y) - Thumbs up
483 (N) - Thumbs down
484 (B) - Beer mug
485 (D) - Martini glass
486 (X) - Girl
487 (Z) - Boy
488 (6) - Devil smiley
489 :-[ - Vampire bat
490 (}) - Right hug
491 ({) - Left hug
492 (M) - MSN Messenger or Windows Messenger icon (think a BitlBee logo here ;)
493 :-S - Crooked smiley (Confused smiley)
494 :-$ - Embarrassed smiley
495 (H) - Smiley with sunglasses
496 :-@ - Angry smiley
497 (A) - Angel smiley
498 (L) - Red heart (Love)
499 (U) - Broken heart
500 (K) - Red lips (Kiss)
501 (G) - Gift with bow
502 (F) - Red rose
503 (W) - Wilted rose
504 (P) - Camera
505 (~) - Film strip
506 (T) - Telephone receiver
507 (@) - Cat face
508 (&) - Dog's head
509 (C) - Coffee cup
510 (I) - Light bulb
511 (S) - Half-moon (Case sensitive!)
512 (*) - Star
513 (8) - Musical eighth note
514 (E) - Envelope
515 (^) - Birthday cake
516 (O) - Clock
517
518This list was extracted from http://help.msn.com/!data/en_us/data/messengerv50.its51/$content$/EMOTICONS.HTM?H_APP=.
519%
520?groupchats
521Since version 0.8x, BitlBee supports groupchats on the MSN and Yahoo! networks. This text will try to explain you how they work.
522
523As soon as someone invites you into a groupchat, you will be force-joined or invited (depending on the protocol) into a new virtual channel with all the people in there. You can leave the channel at any time, just like you would close the window in regular IM clients. Please note that root-commands don't work in groupchat channels, they only work in the control channel (or to root directly).
524
525Of course you can also create your own groupchats. Type help groupchats2 to see how.
526%
527?groupchats2
528If you want to start a groupchat with the person jim_msn in it, just join the channel #jim_msn. BitlBee will refuse to join you to the channel with that name, but it will create a new virtual channel with root, you and jim_msn in it.
529
530Of course a channel with only two people isn't really exciting yet. So the next step is to invite some other people to the channel. For this, you can use the /invite command of your IRC client. Please do keep in mind that all the people have to be on the same network and contact list! You can't invite Yahoo! buddies into an MSN groupchat.
531
532This is all you'll probably need to know. If you have any problems, please read help groupchats3.
533%
534?groupchats3
535Obviously the (numbered) channel names don't make a lot of sense. Problem is that groupchats usually don't have names at all in the IM-world, while IRC insists on a name. So BitlBee just generates something random, just don't pay attention to it. :-)
536
537Please also note that BitlBee doesn't support groupchats for all protocols yet. BitlBee will tell you so. Support for other protocols will hopefully come later.
538%
539?away
540As you might've expected, you can just use the /away command in your IRC client to set an away-state. BitlBee supports most away-states supported by the protocols.
541
542Not all away states are supported by all protocols, and some protocols have different names for them. BitlBee will try to pick the best available alias from this list for every connection:
543
544 - Away from computer, Away, Extended away
545 - NA, N/A, Not available
546 - Busy, Do not disturb, DND, Occupied
547 - Be right back, BRB
548 - On the phone, Phone, On phone
549 - Out to lunch, Lunch, Food
550
551So /away Food will set your state to "Out to lunch" on your MSN connection, and for most other connections the default, "Away" or "Away from computer" will be chosen.
552
553You can also add more information to your away message. Setting it to "Busy - Fixing BitlBee bugs" will set your IM-away-states to Busy, but your away message will be more descriptive for people on IRC. Protocols like Yahoo! and Jabber will also show this complete away message to your buddies.
554%
Note: See TracBrowser for help on using the repository browser.