source: doc/user-guide/commands.xml @ ad5a907

Last change on this file since ad5a907 was 808825e, checked in by jgeboski <jgeboski@…>, at 2016-05-26T02:48:08Z

Show the enabled/disabled protocols in the 'plugins' command output
  • Property mode set to 100644
File size: 78.5 KB
Line 
1<chapter id="commands">
2        <title>Bitlbee commands</title>
3
4        <command-list/>
5
6        <bitlbee-command name="account">
7                <short-description>IM-account list maintenance</short-description>
8                <syntax>account [&lt;account id&gt;] &lt;action&gt; [&lt;arguments&gt;]</syntax>
9
10                <description>
11
12                        <para>
13                                Available actions: add, del, list, on, off and set. See <emphasis>help account &lt;action&gt;</emphasis> for more information.
14                        </para>
15
16                </description>
17
18                <bitlbee-command name="add">
19                        <syntax>account add &lt;protocol&gt; &lt;username&gt; [&lt;password&gt;]</syntax>
20
21                        <description>
22                                <para>
23                                        Adds an account on the given server with the specified protocol, username and password to the account list. Supported protocols right now are: Jabber, MSN, OSCAR (AIM/ICQ), Yahoo and Twitter. For more information about adding an account, see <emphasis>help account add &lt;protocol&gt;</emphasis>.
24                                </para>
25
26                                <para>
27                                        You can omit the password and enter it separately using the IRC /OPER command. This lets you enter your password without your IRC client echoing it on screen or recording it in logs.
28                                </para>
29                        </description>
30                       
31                        <bitlbee-command name="jabber">
32                                <syntax>account add jabber &lt;handle@server.tld&gt; [&lt;password&gt;]</syntax>
33
34                                <description>
35                                        <para>
36                                                The handle should be a full handle, including the domain name. You can specify a servername if necessary. Normally BitlBee doesn't need this though, since it's able to find out the server by doing DNS SRV lookups.
37                                        </para>
38
39                                        <para>
40                                                In previous versions it was also possible to specify port numbers and/or SSL in the server tag. This is deprecated and should now be done using the <emphasis>account set</emphasis> command. This also applies to specifying a resource in the handle (like <emphasis>wilmer@bitlbee.org/work</emphasis>).
41                                        </para>
42                                </description>
43                        </bitlbee-command>
44
45                        <bitlbee-command name="msn">
46                                <syntax>account add msn &lt;handle@server.tld&gt; [&lt;password&gt;]</syntax>
47
48                                <description>
49                                        <para>
50                                                For MSN connections there are no special arguments.
51                                        </para>
52                                </description>
53                        </bitlbee-command>
54                       
55                        <bitlbee-command name="oscar">
56                                <syntax>account add oscar &lt;handle&gt; [&lt;password&gt;]</syntax>
57
58                                <description>
59                                        <para>
60                                                OSCAR is the protocol used to connect to AIM and/or ICQ. The servers will automatically detect if you're using a numeric or non-numeric username so there's no need to tell which network you want to connect to.
61                                        </para>
62                                </description>
63
64                                <ircexample>
65                                        <ircline nick="wilmer">account add oscar 72696705 hobbelmeeuw</ircline>
66                                        <ircline nick="root">Account successfully added</ircline>
67                                </ircexample>
68                        </bitlbee-command>
69                       
70                        <bitlbee-command name="twitter">
71                                <syntax>account add twitter &lt;handle&gt;</syntax>
72
73                                <description>
74                                        <para>
75                                                This module gives you simple access to Twitter and Twitter API compatible services.
76                                        </para>
77                                       
78                                        <para>
79                                                By default all your Twitter contacts will appear in a new channel called #twitter_yourusername. You can change this behaviour using the <emphasis>mode</emphasis> setting (see <emphasis>help set mode</emphasis>).
80                                        </para>
81                                       
82                                        <para>
83                                                To send tweets yourself, send them to the twitter_(yourusername) contact, or just write in the groupchat channel if you enabled that option.
84                                        </para>
85
86                                        <para>
87                                                Since Twitter now requires OAuth authentication, you should not enter your Twitter password into BitlBee. Just type a bogus password. The first time you log in, BitlBee will start OAuth authentication. (See <emphasis>help set oauth</emphasis>.)
88                                        </para>
89                                       
90                                        <para>
91                                                To use a non-Twitter service, change the <emphasis>base_url</emphasis> setting. For identi.ca, you can simply use <emphasis>account add identica</emphasis>.
92                                        </para>
93                                </description>
94                        </bitlbee-command>
95                       
96                        <bitlbee-command name="identica">
97                                <syntax>account add identica &lt;handle&gt;</syntax>
98
99                                <description>
100                                        <para>
101                                                Same protocol as <emphasis>twitter</emphasis>, but defaults to a <emphasis>base_url</emphasis> pointing at identi.ca. It also works with OAuth (so don't specify your password).
102                                        </para>
103                                </description>
104                        </bitlbee-command>
105
106                        <bitlbee-command name="yahoo">
107                                <syntax>account add yahoo &lt;handle&gt; [&lt;password&gt;]</syntax>
108
109                                <description>
110                                        <para>
111                                                For Yahoo! connections there are no special arguments.
112                                        </para>
113                                </description>
114                        </bitlbee-command>
115
116                </bitlbee-command>
117
118                <bitlbee-command name="del">
119                        <syntax>account &lt;account id&gt; del</syntax>
120
121                        <description>
122                                <para>
123                                        This command deletes an account from your account list. You should signoff the account before deleting it.
124                                </para>
125
126
127                                <para>
128                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
129                                </para>
130                        </description>
131                </bitlbee-command>
132
133                <bitlbee-command name="on">
134                        <syntax>account [&lt;account id&gt;] on</syntax>
135
136                        <description>
137                                <para>
138                                        This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set.
139                                </para>
140
141                                <para>
142                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
143                                </para>
144                        </description>
145
146                </bitlbee-command>
147
148                <bitlbee-command name="off">
149                        <syntax>account [&lt;account id&gt;] off</syntax>
150
151                        <description>
152                                <para>
153                                        This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects.
154                                </para>
155
156                                <para>
157                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
158                                </para>
159                        </description>
160                </bitlbee-command>
161
162                <bitlbee-command name="list">
163                        <syntax>account list</syntax>
164
165                        <description>
166                                <para>
167                                        This command gives you a list of all the accounts known by BitlBee.
168                                </para>
169                        </description>
170                </bitlbee-command>
171
172                <bitlbee-command name="set">
173                        <syntax>account &lt;account id&gt; set</syntax>
174                        <syntax>account &lt;account id&gt; set &lt;setting&gt;</syntax>
175                        <syntax>account &lt;account id&gt; set &lt;setting&gt; &lt;value&gt;</syntax>
176                        <syntax>account &lt;account id&gt; set -del &lt;setting&gt;</syntax>
177
178                        <description>
179                                <para>
180                                        This command can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing <emphasis>account &lt;account id&gt; set</emphasis>.
181                                </para>
182                               
183                                <para>
184                                        For more information about a setting, see <emphasis>help set &lt;setting&gt;</emphasis>.
185                                </para>
186                               
187                                <para>
188                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
189                                </para>
190                        </description>
191                </bitlbee-command>
192        </bitlbee-command>
193
194        <bitlbee-command name="channel">
195                <short-description>Channel list maintenance</short-description>
196                <syntax>channel [&lt;account id&gt;] &lt;action&gt; [&lt;arguments&gt;]</syntax>
197
198                <description>
199                        <para>
200                                Available actions: del, list, set. See <emphasis>help channel &lt;action&gt;</emphasis> for more information.
201                        </para>
202                       
203                        <para>
204                                There is no <emphasis>channel add</emphasis> command. To create a new channel, just use the IRC <emphasis>/join</emphasis> command. See also <emphasis>help channels</emphasis> and <emphasis>help groupchats</emphasis>.
205                        </para>
206                </description>
207
208                <bitlbee-command name="del">
209                        <syntax>channel &lt;channel id&gt; del</syntax>
210
211                        <description>
212                                <para>
213                                        Remove a channel and forget all its settings. You can only remove channels you're not currently in, and can't remove the main control channel. (You can, however, leave it.)
214                                </para>
215                        </description>
216
217                </bitlbee-command>
218
219                <bitlbee-command name="list">
220                        <syntax>channel list</syntax>
221
222                        <description>
223                                <para>
224                                        This command gives you a list of all the channels you configured.
225                                </para>
226                        </description>
227
228                </bitlbee-command>
229
230                <bitlbee-command name="set">
231                        <syntax>channel [&lt;channel id&gt;] set</syntax>
232                        <syntax>channel [&lt;channel id&gt;] set &lt;setting&gt;</syntax>
233                        <syntax>channel [&lt;channel id&gt;] set &lt;setting&gt; &lt;value&gt;</syntax>
234                        <syntax>channel [&lt;channel id&gt;] set -del &lt;setting&gt;</syntax>
235
236                        <description>
237                                <para>
238                                        This command can be used to change various settings for channels. Different channel types support different settings. You can see the settings available for a channel by typing <emphasis>channel &lt;channel id&gt; set</emphasis>.
239                                </para>
240                               
241                                <para>
242                                        For more information about a setting, see <emphasis>help set &lt;setting&gt;</emphasis>.
243                                </para>
244                               
245                                <para>
246                                        The channel ID can be a number (see <emphasis>channel list</emphasis>), or (part of) its name, as long as it matches only one channel. If you want to change settings of the current channel, you can omit the channel ID.
247                                </para>
248                        </description>
249                </bitlbee-command>
250
251        </bitlbee-command>
252
253        <bitlbee-command name="chat">
254                <short-description>Chatroom list maintenance</short-description>
255                <syntax>chat &lt;action&gt; [&lt;arguments&gt;]</syntax>
256
257                <description>
258
259                        <para>
260                                Available actions: add, with. See <emphasis>help chat &lt;action&gt;</emphasis> for more information.
261                        </para>
262
263                </description>
264
265                <bitlbee-command name="add">
266                        <syntax>chat add &lt;account id&gt; &lt;room&gt; [&lt;channel&gt;]</syntax>
267
268                        <description>
269                                <para>
270                                        Add a chatroom to the list of chatrooms you're interested in. BitlBee needs this list to map room names to a proper IRC channel name.
271                                </para>
272
273                                <para>
274                                        After adding a room to your list, you can simply use the IRC /join command to enter the room. Also, you can tell BitlBee to automatically join the room when you log in. (See <emphasis>chat set</emphasis>)
275                                </para>
276
277                                <para>
278                                        Password-protected rooms work exactly like on IRC, by passing the password as an extra argument to /join.
279                                </para>
280                        </description>
281
282                </bitlbee-command>
283
284                <bitlbee-command name="with">
285                        <syntax>chat with &lt;nickname&gt;</syntax>
286
287                        <description>
288                                <para>
289                                        While most <emphasis>chat</emphasis> subcommands are about named chatrooms, this command can be used to open an unnamed groupchat with one or more persons. This command is what <emphasis>/join #nickname</emphasis> used to do in older BitlBee versions.
290                                </para>
291                        </description>
292                </bitlbee-command>
293        </bitlbee-command>
294
295        <bitlbee-command name="add">
296                <short-description>Add a buddy to your contact list</short-description>
297                <syntax>add &lt;account id&gt; &lt;handle&gt; [&lt;nick&gt;]</syntax>
298                <syntax>add -tmp &lt;account id&gt; &lt;handle&gt; [&lt;nick&gt;]</syntax>
299
300                <description>
301                        <para>
302                                Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
303                        </para>
304
305                        <para>
306                                If you want, you can also tell BitlBee what nick to give the new contact. The -tmp option adds the buddy to the internal BitlBee structures only, not to the real contact list (like done by <emphasis>set handle_unknown add</emphasis>). This allows you to talk to people who are not in your contact list. This normally won't show you any presence notifications.
307                        </para>
308
309                        <para>
310                                If you use this command in a control channel containing people from only one group, the new contact will be added to that group automatically.
311                        </para>
312                </description>
313
314                <ircexample>
315                        <ircline nick="ctrlsoft">add 3 gryp@jabber.org grijp</ircline>
316                        <ircaction nick="grijp" hostmask="gryp@jabber.org">has joined <emphasis>&amp;bitlbee</emphasis></ircaction>
317                </ircexample>
318        </bitlbee-command>
319
320        <bitlbee-command name="info">
321                <short-description>Request user information</short-description>
322                <syntax>info &lt;connection&gt; &lt;handle&gt;</syntax>
323                <syntax>info &lt;nick&gt;</syntax>
324
325                <description>
326                        <para>
327                                Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols (ATM Yahoo! and MSN) it'll give you an URL which you can visit with a normal web browser to get the information.
328                        </para>
329                </description>
330
331                <ircexample>
332                        <ircline nick="ctrlsoft">info 0 72696705</ircline>
333                        <ircline nick="root">User info - UIN: 72696705   Nick: Lintux   First/Last name: Wilmer van der Gaast   E-mail: lintux@lintux.cx</ircline>
334                </ircexample>
335
336        </bitlbee-command>
337
338        <bitlbee-command name="remove">
339                <short-description>Remove a buddy from your contact list</short-description>
340                <syntax>remove &lt;nick&gt;</syntax>
341
342                <description>
343                        <para>
344                                Removes the specified nick from your buddy list.
345                        </para>
346                </description>
347
348                <ircexample>
349                        <ircline nick="ctrlsoft">remove gryp</ircline>
350                        <ircaction nick="gryp" hostmask="gryp@jabber.jabber.org">has quit <emphasis>[Leaving...]</emphasis></ircaction>
351                </ircexample>
352
353        </bitlbee-command>
354
355        <bitlbee-command name="block">
356                <short-description>Block someone</short-description>
357                <syntax>block &lt;nick&gt;</syntax>
358                <syntax>block &lt;connection&gt; &lt;handle&gt;</syntax>
359                <syntax>block &lt;connection&gt;</syntax>
360
361                <description>
362                        <para>
363                                Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
364                        </para>
365                       
366                        <para>
367                                When called with only a connection specification as an argument, the command displays the current block list for that connection.
368                        </para>
369                </description>
370        </bitlbee-command>
371
372        <bitlbee-command name="allow">
373                <short-description>Unblock someone</short-description>
374                <syntax>allow &lt;nick&gt;</syntax>
375                <syntax>allow &lt;connection&gt; &lt;handle&gt;</syntax>
376
377                <description>
378                        <para>
379                                Reverse of block. Unignores the specified user or user handle on specified connection.
380                        </para>
381                       
382                        <para>
383                                When called with only a connection specification as an argument, the command displays the current allow list for that connection.
384                        </para>
385                </description>
386        </bitlbee-command>
387       
388        <bitlbee-command name="otr">
389                <short-description>Off-the-Record encryption control</short-description>
390                <syntax>otr &lt;subcommand&gt; [&lt;arguments&gt;]</syntax>
391
392                <description>
393
394                        <para>
395                                Available subcommands: connect, disconnect, reconnect, smp, smpq, trust, info, keygen, and forget. See <emphasis>help otr &lt;subcommand&gt;</emphasis> for more information.
396                        </para>
397
398                </description>
399               
400                <bitlbee-command name="connect">
401                        <syntax>otr connect &lt;nick&gt;</syntax>
402                       
403                        <description>
404                       
405                                <para>
406                                        Attempts to establish an encrypted connection with the specified user by sending a magic string.
407                                </para>
408                               
409                        </description>
410               
411                </bitlbee-command>
412               
413                <bitlbee-command name="disconnect">
414                        <syntax>otr disconnect &lt;nick&gt;</syntax>
415                        <syntax>otr disconnect *</syntax>
416                       
417                        <description>
418                       
419                                <para>
420                                        Resets the connection with the specified user/all users to cleartext.
421                                </para>
422                               
423                        </description>
424               
425                </bitlbee-command>
426               
427                <bitlbee-command name="reconnect">
428                        <syntax>otr reconnect &lt;nick&gt;</syntax>
429                       
430                        <description>
431                       
432                                <para>
433                                        Breaks and re-establishes the encrypted connection with the specified user. Useful if something got desynced.
434                                </para>
435                               
436                                <para>
437                                        Equivalent to <emphasis>otr disconnect</emphasis> followed by <emphasis>otr connect</emphasis>.
438                                </para>
439                               
440                        </description>
441               
442                </bitlbee-command>
443               
444                <bitlbee-command name="smp">
445                        <syntax>otr smp &lt;nick&gt; &lt;secret&gt;</syntax>
446                       
447                        <description>
448                       
449                                <para>
450                                        Attempts to authenticate the given user's active fingerprint via the Socialist Millionaires' Protocol.
451                                </para>
452                               
453                                <para>
454                                        If an SMP challenge has been received from the given user, responds with the specified secret/answer. Otherwise, sends a challenge for the given secret.
455                                </para>
456                               
457                                <para>
458                                        Note that there are two flavors of SMP challenges: "shared-secret" and "question &amp; answer". This command is used to respond to both of them, or to initiate a shared-secret style exchange. Use the <emphasis>otr smpq</emphasis> command to initiate a "Q&amp;A" session.
459                                </para>
460                               
461                                <para>
462                                        When responding to a "Q&amp;A" challenge, the local trust value is not altered. Only the <emphasis>asking party</emphasis> sets trust in the case of success. Use <emphasis>otr smpq</emphasis> to pose your challenge. In a shared-secret exchange, both parties set their trust according to the outcome.
463                                </para>
464                               
465                        </description>
466               
467                </bitlbee-command>
468               
469                <bitlbee-command name="smpq">
470                        <syntax>otr smpq &lt;nick&gt; &lt;question&gt; &lt;answer&gt;</syntax>
471                       
472                        <description>
473                       
474                                <para>
475                                        Attempts to authenticate the given user's active fingerprint via the Socialist Millionaires' Protocol, Q&amp;A style.
476                                </para>
477
478                                <para>
479                                        Initiates an SMP session in "question &amp; answer" style. The question is transmitted with the initial SMP packet and used to prompt the other party. You must be confident that only they know the answer. If the protocol succeeds (i.e. they answer correctly), the fingerprint will be trusted. Note that the answer must be entered exactly, case and punctuation count!
480                                </para>
481                               
482                                <para>
483                                        Note that this style of SMP only affects the trust setting on your side. Expect your opponent to send you their own challenge. Alternatively, if you and the other party have a shared secret, use the <emphasis>otr smp</emphasis> command.
484                                </para>
485                               
486                        </description>
487               
488                </bitlbee-command>
489               
490                <bitlbee-command name="trust">
491                        <syntax>otr trust &lt;nick&gt; &lt;fp1&gt; &lt;fp2&gt; &lt;fp3&gt; &lt;fp4&gt; &lt;fp5&gt;</syntax>
492                       
493                        <description>
494                       
495                                <para>
496                                        Manually affirms trust in the specified fingerprint, given as five blocks of precisely eight (hexadecimal) digits each.
497                                </para>
498                               
499                        </description>
500               
501                </bitlbee-command>
502               
503                <bitlbee-command name="info">
504                        <syntax>otr info</syntax>
505                        <syntax>otr info &lt;nick&gt;</syntax>
506                       
507                        <description>
508                       
509                                <para>
510                                        Shows information about the OTR state. The first form lists our private keys and current OTR contexts. The second form displays information about the connection with a given user, including the list of their known fingerprints.
511                                </para>
512                               
513                        </description>
514               
515                </bitlbee-command>
516               
517                <bitlbee-command name="keygen">
518                        <syntax>otr keygen &lt;account-no&gt;</syntax>
519                       
520                        <description>
521                       
522                                <para>
523                                        Generates a new OTR private key for the given account.
524                                </para>
525                               
526                        </description>
527               
528                </bitlbee-command>
529               
530                <bitlbee-command name="forget">
531                        <syntax>otr forget &lt;thing&gt; &lt;arguments&gt;</syntax>
532                       
533                        <description>
534                       
535                                <para>
536                                        Forgets some part of our OTR userstate. Available things: fingerprint, context, and key. See <emphasis>help otr forget &lt;thing&gt;</emphasis> for more information.
537                                </para>
538                       
539                        </description>
540                       
541                        <bitlbee-command name="fingerprint">
542                                <syntax>otr forget fingerprint &lt;nick&gt; &lt;fingerprint&gt;</syntax>
543                               
544                                <description>
545                               
546                                        <para>
547                                                Drops the specified fingerprint from the given user's OTR connection context. It is allowed to specify only a (unique) prefix of the desired fingerprint.
548                                        </para>
549                                       
550                                </description>
551                               
552                        </bitlbee-command>
553                               
554                        <bitlbee-command name="context">
555                                <syntax>otr forget context &lt;nick&gt;</syntax>
556                               
557                                <description>
558                               
559                                        <para>
560                                                Forgets the entire OTR context associated with the given user. This includes current message and protocol states, as well as any fingerprints for that user.
561                                        </para>
562                                       
563                                </description>
564                               
565                        </bitlbee-command>
566
567                        <bitlbee-command name="key">
568                                <syntax>otr forget key &lt;fingerprint&gt;</syntax>
569                               
570                                <description>
571                               
572                                        <para>
573                                                Forgets an OTR private key matching the specified fingerprint. It is allowed to specify only a (unique) prefix of the fingerprint.
574                                        </para>
575                                       
576                                </description>
577                               
578                        </bitlbee-command>
579               
580                </bitlbee-command>
581               
582        </bitlbee-command>
583
584        <bitlbee-command name="set">
585                <short-description>Miscellaneous settings</short-description>
586                <syntax>set</syntax>
587                <syntax>set &lt;variable&gt;</syntax>
588                <syntax>set &lt;variable&gt; &lt;value&gt;</syntax>
589                <syntax>set -del &lt;variable&gt;</syntax>
590
591                <description>
592
593                        <para>
594                                Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument. With <emphasis>-del</emphasis> you can reset a setting to its default value.
595                        </para>
596
597                        <para>
598                                To get more help information about a setting, try:
599                        </para>
600
601                </description>
602
603                <ircexample>
604                        <ircline nick="ctrlsoft">help set private</ircline>
605                </ircexample>
606
607        </bitlbee-command>
608
609        <bitlbee-command name="help">
610                <short-description>BitlBee help system</short-description>
611
612                <syntax>help [subject]</syntax>
613
614                <description>
615                        <para>
616                                This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
617                        </para>
618                </description>
619        </bitlbee-command>
620
621        <bitlbee-command name="save">
622                <short-description>Save your account data</short-description>
623                <syntax>save</syntax>
624
625                <description>
626                        <para>
627                                This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
628                        </para>
629                </description>
630        </bitlbee-command>
631
632        <bitlbee-setting name="account" type="string" scope="channel">
633
634                <description>
635                        <para>
636                                For control channels with <emphasis>fill_by</emphasis> set to <emphasis>account</emphasis>: Set this setting to the account id (numeric, or part of the username) of the account containing the contacts you want to see in this channel.
637                        </para>
638                </description>
639        </bitlbee-setting>
640
641        <bitlbee-setting name="allow_takeover" type="boolean" scope="global">
642                <default>true</default>
643
644                <description>
645                        <para>
646                                When you're already connected to a BitlBee server and you connect (and identify) again, BitlBee will offer to migrate your existing session to the new connection. If for whatever reason you don't want this, you can disable this setting.
647                        </para>
648                </description>
649        </bitlbee-setting>
650
651        <bitlbee-setting name="always_use_nicks" type="boolean" scope="channel">
652                <default>false</default>
653
654                <description>
655                        <para>
656                                Jabber groupchat specific. This setting ensures that the nicks defined by the other members of a groupchat are used, instead of the username part of their JID. This only applies to groupchats where their real JID is known (either "non-anonymous" ones, or "semi-anonymous" from the point of view of the channel moderators)
657                        </para>
658
659                        <para>
660                                Enabling this may have the side effect of changing the nick of existing contacts, either in your buddy list or in other groupchats. If a contact is in multiple groupchats with different nicks, enabling this setting for all those would result in multiple nick changes when joining, and the order of those changes may vary.
661                        </para>
662
663                        <para>
664                                Note that manual nick changes done through the <emphasis>rename</emphasis> command always take priority
665                        </para>
666                </description>
667        </bitlbee-setting>
668
669        <bitlbee-setting name="auto_connect" type="boolean" scope="account,global">
670                <default>true</default>
671
672                <description>
673                        <para>
674                                With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
675                        </para>
676                       
677                        <para>
678                                This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_connect</emphasis> setting is disabled!)
679                        </para>
680                </description>
681        </bitlbee-setting>
682
683        <bitlbee-setting name="auto_join" type="boolean" scope="channel">
684                <default>false</default>
685
686                <description>
687                        <para>
688                                With this option enabled, BitlBee will automatically join this channel when you log in.
689                        </para>
690                </description>
691        </bitlbee-setting>
692
693        <bitlbee-setting name="auto_reconnect" type="boolean" scope="account,global">
694                <default>true</default>
695
696                <description>
697                        <para>
698                                If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
699                        </para>
700
701                        <para>
702                                See also the <emphasis>auto_reconnect_delay</emphasis> setting.
703                        </para>
704
705                        <para>
706                                This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_reconnect</emphasis> setting is disabled!)
707                        </para>
708                </description>
709        </bitlbee-setting>
710
711        <bitlbee-setting name="auto_reconnect_delay" type="string" scope="global">
712                <default>5*3&lt;900</default>
713
714                <description>
715                        <para>
716                                Tell BitlBee after how many seconds it should attempt to bring a broken IM-connection back up.
717                        </para>
718
719                        <para>
720                                This can be one integer, for a constant delay. One can also set it to something like &quot;10*10&quot;, which means wait for ten seconds on the first reconnect, multiply it by ten on every failure. Once successfully connected, this delay is re-set to the initial value. With &lt; you can give a maximum delay.
721                        </para>
722
723                        <para>
724                                See also the <emphasis>auto_reconnect</emphasis> setting.
725                        </para>
726                </description>
727        </bitlbee-setting>
728
729        <bitlbee-setting name="auto_reply_timeout" type="integer" scope="account">
730                <default>10800</default>
731
732                <description>
733                        <para>
734                                For Twitter accounts: If you respond to Tweets IRC-style (like "nickname: reply"), this will automatically be converted to the usual Twitter format ("@screenname reply").
735                        </para>
736
737                        <para>
738                                By default, BitlBee will then also add a reference to that person's most recent Tweet, unless that message is older than the value of this setting in seconds.
739                        </para>
740
741                        <para>
742                                If you want to disable this feature, just set this to 0. Alternatively, if you want to write a message once that is <emphasis>not</emphasis> a reply, use the Twitter reply syntax (@screenname).
743                        </para>
744                </description>
745        </bitlbee-setting>
746
747        <bitlbee-setting name="away" type="string" scope="account,global">
748                <description>
749                        <para>
750                                To mark yourself as away, it is recommended to just use <emphasis>/away</emphasis>, like on normal IRC networks. If you want to mark yourself as away on only one IM network, you can use this per-account setting.
751                        </para>
752
753                        <para>
754                                You can set it to any value and BitlBee will try to map it to the most appropriate away state for every open IM connection, or set it as a free-form away message where possible.
755                        </para>
756
757                        <para>
758                                Any per-account away setting will override globally set away states. To un-set the setting, use <emphasis>set -del away</emphasis>.
759                        </para>
760                </description>
761        </bitlbee-setting>
762
763        <bitlbee-setting name="away_devoice" type="boolean" scope="global">
764                <default>true</default>
765
766                <description>
767                        <para>
768                                With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
769                        </para>
770                       
771                        <para>
772                                Replaced with the <emphasis>show_users</emphasis> setting. See <emphasis>help show_users</emphasis>.
773                        </para>
774                </description>
775        </bitlbee-setting>
776
777        <bitlbee-setting name="away_reply_timeout" type="integer" scope="global">
778                <default>3600</default>
779
780                <description>
781                        <para>
782                                Most IRC servers send a user's away message every time s/he gets a private message, to inform the sender that they may not get a response immediately. With this setting set to 0, BitlBee will also behave like this.
783                        </para>
784
785                        <para>
786                                Since not all IRC clients do an excellent job at suppressing these messages, this setting lets BitlBee do it instead. BitlBee will wait this many seconds (or until the away state/message changes) before re-informing you that the person's away.
787                        </para>
788                </description>
789        </bitlbee-setting>
790
791        <bitlbee-setting name="base_url" type="string" scope="account">
792                <default>http://api.twitter.com/1</default>
793
794                <description>
795                        <para>
796                                There are more services that understand the Twitter API than just Twitter.com. BitlBee can connect to all Twitter API implementations.
797                        </para>
798
799                        <para>
800                                For example, set this setting to <emphasis>http://identi.ca/api</emphasis> to use Identi.ca.
801                        </para>
802
803                        <para>
804                                Keep two things in mind: When not using Twitter, you <emphasis>must</emphasis> also disable the <emphasis>oauth</emphasis> setting as it currently only works with Twitter. If you're still having issues, make sure there is <emphasis>no</emphasis> slash at the end of the URL you enter here.
805                        </para>
806                </description>
807        </bitlbee-setting>
808
809        <bitlbee-setting name="carbons" type="boolean" scope="account">
810                <default>true</default>
811
812                <description>
813                        <para>
814                                Jabber specific. "Message carbons" (XEP-0280) is a server feature to get copies of outgoing messages sent from other clients connected to the same account. It's not widely supported by most public XMPP servers (easier if you host your own), but this will probably change in the next few years.
815                        </para>
816                        <para>
817                                This defaults to true, which will enable it if the server supports it, or fail silently if it's not. This setting only exists to allow disabling the feature if anyone considers it undesirable.
818                        </para>
819                        <para>
820                                See also the <emphasis>self_messages</emphasis> setting.
821                        </para>
822                </description>
823        </bitlbee-setting>
824
825        <bitlbee-setting name="charset" type="string" scope="global">
826                <default>utf-8</default>
827                <possible-values>you can get a list of all possible values by doing 'iconv -l' in a shell</possible-values>
828
829                <description>
830                        <para>
831                                This setting tells BitlBee what your IRC client sends and expects. It should be equal to the charset setting of your IRC client if you want to be able to send and receive non-ASCII text properly.
832                        </para>
833
834                        <para>
835                                Most systems use UTF-8 these days. On older systems, an iso8859 charset may work better. For example, iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://www.unicodecharacter.com/charsets/iso8859.html
836                        </para>
837                </description>
838
839        </bitlbee-setting>
840
841        <bitlbee-setting name="color_encrypted" type="boolean" scope="global">
842                <default>true</default>
843
844                <description>
845                        <para>
846                                If set to true, BitlBee will color incoming encrypted messages according to their fingerprint trust level: untrusted=red, trusted=green.
847                        </para>
848                </description>
849        </bitlbee-setting>
850
851        <bitlbee-setting name="chat_type" type="string" scope="channel">
852                <default>groupchat</default>
853                <possible-values>groupchat, room</possible-values>
854
855                <description>
856                        <para>
857                                There are two kinds of chat channels: simple groupchats (basically normal IM chats with more than two participants) and names chatrooms, more similar to IRC channels.
858                        </para>
859                       
860                        <para>
861                                BitlBee supports both types. With this setting set to <emphasis>groupchat</emphasis> (the default), you can just invite people into the room and start talking.
862                        </para>
863                       
864                        <para>
865                                For setting up named chatrooms, it's currently easier to just use the <emphasis>chat add</emphasis> command.
866                        </para>
867                </description>
868        </bitlbee-setting>
869
870        <bitlbee-setting name="commands" type="boolean" scope="account">
871                <default>true</default>
872                <possible-values>true, false, strict</possible-values>
873
874                <description>
875                        <para>
876                                With this setting enabled, you can use some commands in your Twitter channel/query. The commands are simple and not documented in too much detail:
877                        </para>
878
879                        <variablelist>
880                                <varlistentry><term>undo #[&lt;id&gt;]</term><listitem><para>Delete your last Tweet (or one with the given ID)</para></listitem></varlistentry>
881                                <varlistentry><term>rt &lt;screenname|#id&gt;</term><listitem><para>Retweet someone's last Tweet (or one with the given ID)</para></listitem></varlistentry>
882                                <varlistentry><term>reply &lt;screenname|#id&gt;</term><listitem><para>Reply to a Tweet (with a reply-to reference)</para></listitem></varlistentry>
883                                <varlistentry><term>rawreply &lt;screenname|#id&gt;</term><listitem><para>Reply to a Tweet (with no reply-to reference)</para></listitem></varlistentry>
884                                <varlistentry><term>report &lt;screenname|#id&gt;</term><listitem><para>Report the given user (or the user who posted the tweet with the given ID) for sending spam. This will also block them.</para></listitem></varlistentry>
885                                <varlistentry><term>follow &lt;screenname&gt;</term><listitem><para>Start following a person</para></listitem></varlistentry>
886                                <varlistentry><term>unfollow &lt;screenname&gt;</term><listitem><para>Stop following a person</para></listitem></varlistentry>
887                                <varlistentry><term>favourite &lt;screenname|#id&gt;</term><listitem><para>Favo<emphasis>u</emphasis>rite the given user's most recent tweet, or the given tweet ID.</para></listitem></varlistentry>
888                                <varlistentry><term>post &lt;message&gt;</term><listitem><para>Post a tweet</para></listitem></varlistentry>
889                                <varlistentry><term>url &lt;screenname|#id&gt;</term><listitem><para>Show URL for a tweet to open it in a browser (and see context)</para></listitem></varlistentry>
890                        </variablelist>
891
892                        <para>
893                                Anything that doesn't look like a command will be treated as a tweet. Watch out for typos, or to avoid this behaviour, you can set this setting to <emphasis>strict</emphasis>, which causes the <emphasis>post</emphasis> command to become mandatory for posting a tweet.
894                        </para>
895                </description>
896        </bitlbee-setting>
897
898        <bitlbee-setting name="debug" type="boolean" scope="global">
899                <default>false</default>
900
901                <description>
902                        <para>
903                                Some debugging messages can be logged if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
904                        </para>
905                       
906                        <para>
907                                This feature is not currently used for anything so don't expect this to generate any output.
908                        </para>
909                </description>
910        </bitlbee-setting>
911
912        <bitlbee-setting name="default_target" type="string" scope="global">
913                <default>root</default>
914                <possible-values>root, last</possible-values>
915
916                <description>
917                        <para>
918                                With this value set to <emphasis>root</emphasis>, lines written in a control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in that control channel, set this to <emphasis>last</emphasis>.
919                        </para>
920                </description>
921        </bitlbee-setting>
922
923        <bitlbee-setting name="display_name" type="string" scope="account">
924                <description>
925                        <para>
926                                Currently only available for MSN connections, and for jabber groupchats.
927                        </para>
928                        <para>
929                                For MSN: This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line.
930                        </para>
931                        <para>
932                                For jabber groupchats: this sets the default value of 'nick' for newly created groupchats. There is no way to set an account-wide nick like MSN.
933                        </para>
934                </description>
935        </bitlbee-setting>
936
937        <bitlbee-setting name="display_namechanges" type="boolean" scope="global">
938                <default>false</default>
939
940                <description>
941                        <para>
942                                With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name".
943                        </para>
944                </description>
945        </bitlbee-setting>
946
947        <bitlbee-setting name="display_timestamps" type="boolean" scope="global">
948                <default>true</default>
949
950                <description>
951                        <para>
952                                When incoming messages are old (i.e. offline messages and channel backlogs), BitlBee will prepend them with a timestamp. If you find them ugly or useless, you can use this setting to hide them.
953                        </para>
954                </description>
955        </bitlbee-setting>
956
957        <bitlbee-setting name="fill_by" type="string" scope="channel">
958                <default>all</default>
959                <possible-values>all, group, account, protocol</possible-values>
960
961                <description>
962                        <para>
963                                For control channels only: This setting determines which contacts the channel gets populated with.
964                        </para>
965
966                        <para>
967                                By default, control channels will contain all your contacts. You instead select contacts by buddy group, IM account or IM protocol.
968                        </para>
969                       
970                        <para>
971                                Change this setting and the corresponding <emphasis>account</emphasis>/<emphasis>group</emphasis>/<emphasis>protocol</emphasis> setting to set up this selection.
972                        </para>
973                       
974                        <para>
975                                With a ! prefix an inverted channel can be created, for example with this setting set to <emphasis>!group</emphasis> you can create a channel with all users <emphasis>not</emphasis> in that group.
976                        </para>
977                       
978                        <para>
979                                Note that, when creating a new channel, BitlBee will try to preconfigure the channel for you, based on the channel name. See <emphasis>help channels</emphasis>.
980                        </para>
981                </description>
982        </bitlbee-setting>
983
984        <bitlbee-setting name="group" type="string" scope="channel">
985
986                <description>
987                        <para>
988                                For control channels with <emphasis>fill_by</emphasis> set to <emphasis>group</emphasis>: Set this setting to the name of the group containing the contacts you want to see in this channel.
989                        </para>
990                </description>
991        </bitlbee-setting>
992
993        <bitlbee-setting name="handle_unknown" type="string" scope="global">
994                <default>add_channel</default>
995                <possible-values>root, add, add_private, add_channel, ignore</possible-values>
996
997                <description>
998                        <para>
999                                By default, messages from people who aren't in your contact list are shown in a control channel instead of as a private message.
1000                        </para>
1001
1002                        <para>
1003                                If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
1004                        </para>
1005
1006                        <note>
1007                                <para>
1008                                        Although these users will appear in your control channel, they aren't added to your real contact list. When you restart BitlBee, these auto-added users will be gone. If you want to keep someone in your list, you have to fixate the add using the <emphasis>add</emphasis> command.
1009                                </para>
1010                        </note>
1011                </description>
1012
1013        </bitlbee-setting>
1014
1015        <bitlbee-setting name="ignore_auth_requests" type="boolean" scope="account">
1016                <default>false</default>
1017
1018                <description>
1019                        <para>
1020                                Only supported by OSCAR so far, you can use this setting to ignore ICQ authorization requests, which are hardly used for legitimate (i.e. non-spam) reasons anymore.
1021                        </para>
1022                </description>
1023
1024        </bitlbee-setting>
1025
1026        <bitlbee-setting name="lcnicks" type="boolean" scope="global">
1027                <default>true</default>
1028
1029                <description>
1030                        <para>
1031                                Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer.
1032                        </para>
1033                </description>
1034
1035        </bitlbee-setting>
1036
1037        <bitlbee-setting name="local_display_name" type="boolean" scope="account">
1038                <default>false</default>
1039
1040                <description>
1041                        <para>
1042                                Mostly meant to work around a bug in MSN servers (forgetting the display name set by the user), this setting tells BitlBee to store your display name locally and set this name on the MSN servers when connecting.
1043                        </para>
1044                </description>
1045
1046        </bitlbee-setting>
1047
1048        <bitlbee-setting name="mail_notifications" type="boolean" scope="account">
1049                <default>false</default>
1050
1051                <description>
1052                        <para>
1053                                Some protocols (MSN, Yahoo!, GTalk) can notify via IM about new e-mail. Since most people use their Hotmail/Yahoo! addresses as a spam-box, this is disabled default. If you want these notifications, you can enable this setting.
1054                        </para>
1055                </description>
1056
1057        </bitlbee-setting>
1058
1059        <bitlbee-setting name="mail_notifications_handle" type="string" scope="account">
1060                <default>empty</default>
1061
1062                <description>
1063                        <para>
1064                                This setting is available for protocols with e-mail notification functionality. If set to empty all e-mail notifications will go to control channel, if set to some string - this will be the name of a contact who will PRIVMSG you on every new notification.
1065                        </para>
1066                </description>
1067
1068        </bitlbee-setting>
1069
1070        <bitlbee-setting name="message_length" type="integer" scope="account">
1071                <default>140</default>
1072
1073                <description>
1074                        <para>
1075                                Since Twitter rejects messages longer than 140 characters, BitlBee can count message length and emit a warning instead of waiting for Twitter to reject it.
1076                        </para>
1077
1078                        <para>
1079                                You can change this limit here but this won't disable length checks on Twitter's side. You can also set it to 0 to disable the check in case you believe BitlBee doesn't count the characters correctly.
1080                        </para>
1081                </description>
1082
1083        </bitlbee-setting>
1084
1085        <bitlbee-setting name="stream" type="boolean" scope="account">
1086                <default>true</default>
1087
1088                <description>
1089                        <para>
1090                                For Twitter accounts, this setting enables use of the Streaming API. This automatically gives you incoming DMs as well.
1091                        </para>
1092                       
1093                        <para>
1094                                For other Twitter-like services, this setting is not supported.
1095                        </para>
1096                </description>
1097
1098        </bitlbee-setting>
1099       
1100        <bitlbee-setting name="target_url_length" type="integer" scope="account">
1101                <default>20</default>
1102
1103                <description>
1104                        <para>
1105                                Twitter replaces every URL with fixed-length t.co URLs. BitlBee is able to take t.co urls into account when calculating <emphasis>message_length</emphasis> replacing the actual URL length with target_url_length. Setting target_url_length to 0 disables this feature.
1106                        </para>
1107
1108                        <para>
1109                                This setting is disabled for identica accounts by default and will not affect anything other than message safety checks (i.e. Twitter will still replace your URLs with t.co links, even if that makes them longer).
1110                        </para>
1111                </description>
1112
1113        </bitlbee-setting>
1114
1115        <bitlbee-setting name="mode" type="string" scope="account">
1116                <possible-values>one, many, chat</possible-values>
1117                <default>chat</default>
1118
1119                <description>
1120                        <para>
1121                                By default, BitlBee will create a separate channel (called #twitter_yourusername) for all your Twitter contacts/messages.
1122                        </para>
1123
1124                        <para>
1125                                If you don't want an extra channel, you can set this setting to "one" (everything will come from one nick, twitter_yourusername), or to "many" (individual nicks for everyone).
1126                        </para>
1127                       
1128                        <para>
1129                                With modes "chat" and "many", you can send direct messages by /msg'ing your contacts directly. Incoming DMs are only fetched if the "stream" setting is on (default).
1130                        </para>
1131                       
1132                        <para>
1133                                With modes "many" and "one", you can post tweets by /msg'ing the twitter_yourusername contact. In mode "chat", messages posted in the Twitter channel will also be posted as tweets.
1134                        </para>
1135                </description>
1136
1137        </bitlbee-setting>
1138
1139        <bitlbee-setting name="mobile_is_away" type="boolean" scope="global">
1140                <default>false</default>
1141
1142                <description>
1143                        <para>
1144                                Most IM networks have a mobile version of their client. People who use these may not be paying that much attention to messages coming in. By enabling this setting, people using mobile clients will always be shown as away.
1145                        </para>
1146                </description>
1147
1148        </bitlbee-setting>
1149
1150        <bitlbee-setting name="nick" type="string" scope="chat">
1151                <description>
1152                        <para>
1153                                You can use this option to set your nickname in a chatroom. You won't see this nickname yourself, but other people in the room will. By default, BitlBee will use your username as the chatroom nickname.
1154                        </para>
1155                </description>
1156        </bitlbee-setting>
1157
1158        <bitlbee-setting name="nick_format" type="string" scope="account,global">
1159                <default>%-@nick</default>
1160
1161                <description>
1162                        <para>
1163                                By default, BitlBee tries to derive sensible nicknames for all your contacts from their IM handles. In some cases, IM modules (ICQ for example) will provide a nickname suggestion, which will then be used instead. This setting lets you change this behaviour.
1164                        </para>
1165
1166                        <para>
1167                                Whenever this setting is set for an account, it will be used for all its contacts. If it's not set, the global value will be used.
1168                        </para>
1169
1170                        <para>
1171                                It's easier to describe this setting using a few examples:
1172                        </para>
1173
1174                        <para>
1175                                FB-%full_name will make all nicknames start with "FB-", followed by the person's full name. For example you can set this format for your Facebook account so all Facebook contacts are clearly marked.
1176                        </para>
1177
1178                        <para>
1179                                [%group]%-@nick will make all nicknames start with the group the contact is in between square brackets, followed by the nickname suggestions from the IM module if available, or otherwise the handle. Because of the "-@" part, everything from the first @ will be stripped.
1180                        </para>
1181
1182                        <para>
1183                                See <emphasis>help nick_format</emphasis> for more information.
1184                        </para>
1185                </description>
1186        </bitlbee-setting>
1187
1188        <bitlbee-setting name="nick_source" type="string" scope="account">
1189                <default>handle</default>
1190                <possible-values>handle, full_name, first_name</possible-values>
1191
1192                <description>
1193                        <para>
1194                                By default, BitlBee generates a nickname for every contact by taking its handle and chopping off everything after the @. In some cases, this gives very inconvenient nicknames. Some servers use internal identifiers, which are often just numbers.
1195                        </para>
1196
1197                        <para>
1198                                With this setting set to <emphasis>full_name</emphasis>, the person's full name is used to generate a nickname. Or if you don't like long nicknames, set this setting to <emphasis>first_name</emphasis> instead and only the first word will be used. Note that the full name can be full of non-ASCII characters which will be stripped off.
1199                        </para>
1200                </description>
1201        </bitlbee-setting>
1202
1203        <bitlbee-setting name="oauth" type="boolean" scope="account">
1204                <default>true</default>
1205
1206                <description>
1207                        <para>
1208                                This enables OAuth authentication for an IM account; right now the Twitter (working for Twitter only) and Jabber (for Google Talk only) module support it.
1209                        </para>
1210
1211                        <para>
1212                                With OAuth enabled, you shouldn't tell BitlBee your account password. Just add your account with a bogus password and type <emphasis>account on</emphasis>. BitlBee will then give you a URL to authenticate with the service. If this succeeds, you will get a PIN code which you can give back to BitlBee to finish the process.
1213                        </para>
1214
1215                        <para>
1216                                The resulting access token will be saved permanently, so you have to do this only once. If for any reason you want to/have to reauthenticate, you can use <emphasis>account set</emphasis> to reset the account password to something random.
1217                        </para>
1218                </description>
1219
1220        </bitlbee-setting>
1221
1222        <bitlbee-setting name="anonymous" type="boolean" scope="account">
1223                <default>false</default>
1224
1225                <description>
1226                        <para>
1227                                This enables SASL ANONYMOUS login for jabber accounts, as specified by XEP-0175.
1228                        </para>
1229
1230                        <para>
1231                                With this setting enabled, if the server allows this method, a password isn't required and the username part of the JID is ignored (you can use anonymous@jabber.example.com). Servers will usually assign you a random numeric username instead.
1232                        </para>
1233                </description>
1234
1235        </bitlbee-setting>
1236
1237        <bitlbee-setting name="ops" type="string" scope="global">
1238                <default>both</default>
1239                <possible-values>both, root, user, none</possible-values>
1240
1241                <description>
1242                        <para>
1243                                Some people prefer themself and root to have operator status in &amp;bitlbee, other people don't. You can change these states using this setting.
1244                        </para>
1245
1246                        <para>
1247                                The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
1248                        </para>
1249                </description>
1250        </bitlbee-setting>
1251
1252        <bitlbee-setting name="otr_policy" type="string" scope="global">
1253                <default>opportunistic</default>
1254                <possible-values>never, opportunistic, manual, always</possible-values>
1255
1256                <description>
1257                        <para>
1258                                This setting controls the policy for establishing Off-the-Record connections.
1259                        </para>
1260                        <para>
1261                                A value of "never" effectively disables the OTR subsystem. In "opportunistic" mode, a magic whitespace pattern will be appended to the first message sent to any user. If the peer is also running opportunistic OTR, an encrypted connection will be set up automatically. On "manual", on the other hand, OTR connections must be established explicitly using <emphasis>otr connect</emphasis>. Finally, the setting "always" enforces encrypted communication by causing BitlBee to refuse to send any cleartext messages at all.
1262                        </para>
1263                </description>
1264        </bitlbee-setting>
1265
1266        <bitlbee-setting name="password" type="string" scope="account,global">
1267                <description>
1268                        <para>
1269                                Use this global setting to change your "NickServ" password.
1270                        </para>
1271                       
1272                        <para>
1273                                This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service.
1274                        </para>
1275                       
1276                        <para>
1277                                Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text.
1278                        </para>
1279                </description>
1280        </bitlbee-setting>
1281
1282        <bitlbee-setting name="paste_buffer" type="boolean" scope="global">
1283                <default>false</default>
1284
1285                <description>
1286                        <para>
1287                                By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
1288                        </para>
1289
1290                        <para>
1291                                Using the <emphasis>paste_buffer_delay</emphasis> setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
1292                        </para>
1293
1294                        <para>
1295                                Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
1296                        </para>
1297                </description>
1298        </bitlbee-setting>
1299
1300        <bitlbee-setting name="paste_buffer_delay" type="integer" scope="global">
1301                <default>200</default>
1302
1303                <description>
1304
1305                        <para>
1306                                Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds.
1307                        </para>
1308
1309                        <para>
1310                                See also the <emphasis>paste_buffer</emphasis> setting.
1311                        </para>
1312                </description>
1313        </bitlbee-setting>
1314       
1315        <bitlbee-setting name="port" type="integer" scope="account">
1316                <description>
1317                        <para>
1318                                Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections.
1319                        </para>
1320                </description>
1321        </bitlbee-setting>
1322
1323        <bitlbee-setting name="priority" type="integer" scope="account">
1324                <default>0</default>
1325
1326                <description>
1327                        <para>
1328                                Can be set for Jabber connections. When connecting to one account from multiple places, this priority value will help the server to determine where to deliver incoming messages (that aren't addressed to a specific resource already).
1329                        </para>
1330
1331                        <para>
1332                                According to RFC 3921 servers will always deliver messages to the server with the highest priority value. Mmessages will not be delivered to resources with a negative priority setting (and should be saved as an off-line message if all available resources have a negative priority value).
1333                        </para>
1334                </description>
1335        </bitlbee-setting>
1336
1337        <bitlbee-setting name="private" type="boolean" scope="global">
1338                <default>true</default>
1339
1340                <description>
1341                        <para>
1342                                If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in a control channel.
1343                        </para>
1344
1345                        <para>
1346                                This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
1347                        </para>
1348                </description>
1349        </bitlbee-setting>
1350
1351        <bitlbee-setting name="protocol" type="string" scope="channel">
1352
1353                <description>
1354                        <para>
1355                                For control channels with <emphasis>fill_by</emphasis> set to <emphasis>protocol</emphasis>: Set this setting to the name of the IM protocol of all contacts you want to see in this channel.
1356                        </para>
1357                </description>
1358        </bitlbee-setting>
1359
1360        <bitlbee-setting name="proxy" type="string" scope="account">
1361                <default>&lt;local&gt;&lt;auto&gt;</default>
1362
1363                <description>
1364                        <para>
1365                                A list of <emphasis>file transfer proxies</emphasis> for jabber. This isn't the connection proxy. Sorry, look in bitlbee.conf for those.
1366                        </para>
1367
1368                        <para>
1369                                It's a semicolon-separated list of items that can be either <emphasis>JID,HOST,PORT</emphasis> or two special values, <emphasis>&lt;local&gt;</emphasis> (to try a direct connection first) and <emphasis>&lt;auto&gt;</emphasis> (to try to discover a proxy). For example, "&lt;local&gt;;proxy.somewhere.org,123.123.123.123,7777".
1370                        </para>
1371                        <para>
1372                                The address should point to a SOCKS5 bytestreams server, usually provided by jabber servers. This is only used for sending files. Note that the host address might not match what DNS tells you, and the port isn't always the same.
1373                        </para>
1374                        <para>
1375                                The correct way to get a socks proxy host/port is a mystery, and the file transfer might fail anyway. Maybe just try using dropbox instead.
1376                        </para>
1377                </description>
1378        </bitlbee-setting>
1379
1380        <bitlbee-setting name="query_order" type="string" scope="global">
1381                <default>lifo</default>
1382                <possible-values>lifo, fifo</possible-values>
1383
1384                <description>
1385                        <para>
1386                                This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to <emphasis>lifo</emphasis>, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to <emphasis>fifo</emphasis>, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
1387                        </para>
1388
1389                        <para>
1390                                Although the <emphasis>fifo</emphasis> setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
1391                        </para>
1392                </description>
1393        </bitlbee-setting>
1394
1395        <bitlbee-setting name="resource" type="string" scope="account">
1396                <default>BitlBee</default>
1397
1398                <description>
1399                        <para>
1400                                Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string.
1401                        </para>
1402                </description>
1403        </bitlbee-setting>
1404
1405        <bitlbee-setting name="resource_select" type="string" scope="account">
1406                <default>activity</default>
1407                <possible-values>priority, activity</possible-values>
1408
1409                <description>
1410                        <para>
1411                                Because the IRC interface makes it pretty hard to specify the resource to talk to (when a buddy is online through different resources), this setting was added.
1412                        </para>
1413
1414                        <para>
1415                                Normally it's set to <emphasis>priority</emphasis> which means messages will always be delivered to the buddy's resource with the highest priority. If the setting is set to <emphasis>activity</emphasis>, messages will be delivered to the resource that was last used to send you a message (or the resource that most recently connected).
1416                        </para>
1417                </description>
1418        </bitlbee-setting>
1419
1420        <bitlbee-setting name="root_nick" type="string" scope="global">
1421                <default>root</default>
1422
1423                <description>
1424                        <para>
1425                                Normally the "bot" that takes all your BitlBee commands is called "root". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
1426                        </para>
1427                </description>
1428        </bitlbee-setting>
1429
1430        <bitlbee-setting name="save_on_quit" type="boolean" scope="global">
1431                <default>true</default>
1432
1433                <description>
1434                        <para>
1435                                If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
1436                        </para>
1437                </description>
1438        </bitlbee-setting>
1439
1440        <bitlbee-setting name="self_messages" type="string" scope="global">
1441                <default>true</default>
1442                <possible-values>true, false, prefix, prefix_notice</possible-values>
1443
1444                <description>
1445                        <para>
1446                                Change this setting to customize how (or whether) to show self-messages, which are messages sent by yourself from other locations (for example, mobile clients), for IM protocols that support it.
1447                        </para>
1448
1449                        <para>
1450                                When this is set to "true", it will send those messages in the "standard" way, which is a PRIVMSG with source and target fields swapped.
1451                        </para>
1452                       
1453                        <para>
1454                                Since this isn't very well supported by some clients (the messages might appear in the wrong window), you can set it to "prefix" to show them as a normal message prefixed with "-> ", or use "prefix_notice" which is the same thing but with a NOTICE instead.
1455                        </para>
1456
1457                        <para>
1458                                You can also set it to "false" to disable these messages completely.
1459                        </para>
1460
1461                        <para>
1462                                This setting only applies to private messages. Self messages in groupchats are always shown, since they haven't caused issues in any clients so far.
1463                        </para>
1464
1465                        <para>
1466                                More information: <emphasis>https://wiki.bitlbee.org/SelfMessages</emphasis>
1467                        </para>
1468                </description>
1469        </bitlbee-setting>
1470
1471        <bitlbee-setting name="server" type="string" scope="account">
1472                <description>
1473                        <para>
1474                                Can be set for Jabber- and OSCAR-connections. For Jabber, you might have to set this if the servername isn't equal to the part after the @ in the Jabber handle. For OSCAR this shouldn't be necessary anymore in recent BitlBee versions.
1475                        </para>
1476                </description>
1477        </bitlbee-setting>
1478
1479        <bitlbee-setting name="show_ids" type="boolean" scope="account">
1480                <default>true</default>
1481
1482                <description>
1483                        <para>
1484                                Enable this setting on a Twitter account to have BitlBee include a two-digit "id" in front of every message. This id can then be used for replies and retweets.
1485                        </para>
1486                </description>
1487        </bitlbee-setting>
1488
1489        <bitlbee-setting name="show_offline" type="boolean" scope="global">
1490                <default>false</default>
1491
1492                <description>
1493                        <para>
1494                                If enabled causes BitlBee to also show offline users in Channel. Online-users will get op, away-users voice and offline users none of both. This option takes effect as soon as you reconnect.
1495                        </para>
1496                       
1497                        <para>
1498                                Replaced with the <emphasis>show_users</emphasis> setting. See <emphasis>help show_users</emphasis>.
1499                        </para>
1500                </description>
1501        </bitlbee-setting>
1502
1503        <bitlbee-setting name="show_users" type="string" scope="channel">
1504                <default>online+,special%,away</default>
1505
1506                <description>
1507                        <para>
1508                                Comma-separated list of statuses of users you want in the channel,
1509                                and any modes they should have. The following statuses are currently
1510                                recognised: <emphasis>online</emphasis> (i.e. available, not
1511                                away), <emphasis>special</emphasis>, <emphasis>away</emphasis>,
1512                                and <emphasis>offline</emphasis>.
1513                        </para>
1514                       
1515                        <para>
1516                                If a status is followed by a valid channel mode character
1517                                (@, % or +), it will be given to users with that status.
1518                                For example, <emphasis>online@,special%,away+,offline</emphasis>
1519                                will show all users in the channel. Online people will
1520                                have +o, people who are online but away will have +v,
1521                                and others will have no special modes.
1522                        </para>
1523                </description>
1524        </bitlbee-setting>
1525
1526        <bitlbee-setting name="simulate_netsplit" type="boolean" scope="global">
1527                <default>true</default>
1528
1529                <description>
1530                        <para>
1531                                Some IRC clients parse quit messages sent by the IRC server to see if someone really left or just disappeared because of a netsplit. By default, BitlBee tries to simulate netsplit-like quit messages to keep the control channels window clean. If you don't like this (or if your IRC client doesn't support this) you can disable this setting.
1532                        </para>
1533                </description>
1534        </bitlbee-setting>
1535
1536        <bitlbee-setting name="ssl" type="boolean" scope="account">
1537                <default>false</default>
1538
1539                <description>
1540                        <para>
1541                                Currently only available for Jabber connections. Set this to true if you want to connect to the server on an SSL-enabled port (usually 5223).
1542                        </para>
1543
1544                        <para>
1545                                Please note that this method of establishing a secure connection to the server has long been deprecated. You are encouraged to look at the <emphasis>tls</emphasis> setting instead.
1546                        </para>
1547                </description>
1548        </bitlbee-setting>
1549
1550        <bitlbee-setting name="status" type="string" scope="account,global">
1551                <description>
1552                        <para>
1553                                Most IM protocols support status messages, similar to away messages. They can be used to indicate things like your location or activity, without showing up as away/busy.
1554                        </para>
1555
1556                        <para>
1557                                This setting can be used to set such a message. It will be available as a per-account setting for protocols that support it, and also as a global setting (which will then automatically be used for all protocols that support it).
1558                        </para>
1559
1560                        <para>
1561                                Away states set using <emphasis>/away</emphasis> or the <emphasis>away</emphasis> setting will override this setting. To clear the setting, use <emphasis>set -del status</emphasis>.
1562                        </para>
1563                </description>
1564        </bitlbee-setting>
1565
1566        <bitlbee-setting name="strip_html" type="boolean" scope="global">
1567                <default>true</default>
1568
1569                <description>
1570                        <para>
1571                                Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML.
1572                        </para>
1573                        <para>
1574                                If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to <emphasis>always</emphasis>, but this might sometimes accidentally strip non-HTML things too.
1575                        </para>
1576                </description>
1577        </bitlbee-setting>
1578
1579        <bitlbee-setting name="strip_newlines" type="boolean" scope="account">
1580                <default>false</default>
1581
1582                <description>
1583                        <para>
1584                                Turn on this flag to prevent tweets from spanning over multiple lines.
1585                        </para>
1586                </description>
1587        </bitlbee-setting>
1588
1589        <bitlbee-setting name="show_old_mentions" type="integer" scope="account">
1590                <default>20</default>
1591
1592                <description>
1593                        <para>
1594                                This setting specifies the number of old mentions to fetch on connection. Must be less or equal to 200. Setting it to 0 disables this feature.
1595                        </para>
1596                </description>
1597        </bitlbee-setting>
1598
1599        <bitlbee-setting name="switchboard_keepalives" type="boolean" scope="account">
1600                <default>false</default>
1601
1602                <description>
1603                        <para>
1604                                Turn on this flag if you have difficulties talking to offline/invisible contacts.
1605                        </para>
1606                       
1607                        <para>
1608                                With this setting enabled, BitlBee will send keepalives to MSN switchboards with offline/invisible contacts every twenty seconds. This should keep the server and client on the other side from shutting it down.
1609                        </para>
1610                       
1611                        <para>
1612                                This is useful because BitlBee doesn't support MSN offline messages yet and the MSN servers won't let the user reopen switchboards to offline users. Once offline messaging is supported, this flag might be removed.
1613                        </para>
1614                </description>
1615        </bitlbee-setting>
1616
1617        <bitlbee-setting name="tag" type="string" scope="account">
1618                <description>
1619                        <para>
1620                                For every account you have, you can set a tag you can use to uniquely identify that account. This tag can be used instead of the account number (or protocol name, or part of the screenname) when using commands like <emphasis>account</emphasis>, <emphasis>add</emphasis>, etc. You can't have two accounts with one and the same account tag.
1621                        </para>
1622
1623                        <para>
1624                                By default, it will be set to the name of the IM protocol. Once you add a second account on an IM network, a numeric suffix will be added, starting with 2.
1625                        </para>
1626                </description>
1627        </bitlbee-setting>
1628
1629        <bitlbee-setting name="timezone" type="string" scope="global">
1630                <default>local</default>
1631                <possible-values>local, utc, gmt, timezone-spec</possible-values>
1632
1633                <description>
1634                        <para>
1635                                If message timestamps are available for offline messages or chatroom backlogs, BitlBee will display them as part of the message. By default it will use the local timezone. If you're not in the same timezone as the BitlBee server, you can adjust the timestamps using this setting.
1636                        </para>
1637
1638                        <para>
1639                                Values local/utc/gmt should be self-explanatory. timezone-spec is a time offset in hours:minutes, for example: -8 for Pacific Standard Time, +2 for Central European Summer Time, +5:30 for Indian Standard Time.
1640                        </para>
1641                </description>
1642        </bitlbee-setting>
1643
1644        <bitlbee-setting name="tls" type="boolean" scope="account">
1645                <default>true</default>
1646
1647                <description>
1648                        <para>
1649                                By default (with this setting enabled), BitlBee will require Jabber servers to offer encryption via StartTLS and refuse to connect if they don't.
1650                        </para>
1651
1652                        <para>
1653                                If you set this to "try", BitlBee will use StartTLS only if it's offered. With the setting disabled, StartTLS support will be ignored and avoided entirely.
1654                        </para>
1655                </description>
1656        </bitlbee-setting>
1657
1658        <bitlbee-setting name="tls_verify" type="boolean" scope="account">
1659                <default>true</default>
1660
1661                <description>
1662                        <para>
1663                                Currently only available for Jabber connections in combination with the <emphasis>tls</emphasis> setting. Set this to <emphasis>true</emphasis> if you want BitlBee to strictly verify the server's certificate against a list of trusted certificate authorities.
1664                        </para>
1665
1666                        <para>
1667                                The hostname used in the certificate verification is the value of the <emphasis>server</emphasis> setting if the latter is nonempty and the domain of the username else. If you get a hostname related error when connecting to Google Talk with a username from the gmail.com or googlemail.com domain, please try to empty the <emphasis>server</emphasis> setting.
1668                        </para>
1669
1670                        <para>
1671                                Please note that no certificate verification is performed when the <emphasis>ssl</emphasis> setting is used, or when the <emphasis>CAfile</emphasis> setting in <emphasis>bitlbee.conf</emphasis> is not set.
1672                        </para>
1673                </description>
1674        </bitlbee-setting>
1675
1676        <bitlbee-setting name="to_char" type="string" scope="global">
1677                <default>": "</default>
1678
1679                <description>
1680                        <para>
1681                                It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using <emphasis>set to_char</emphasis>.
1682                        </para>
1683
1684                        <para>
1685                                Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
1686                        </para>
1687                </description>
1688        </bitlbee-setting>
1689
1690        <bitlbee-setting name="translate_to_nicks" type="boolean" scope="channel">
1691                <default>true</default>
1692
1693                <description>
1694                        <para>
1695                                IRC's nickname namespace is quite limited compared to most IM protocols. Not any non-ASCII characters are allowed, in fact nicknames have to be mostly alpha-numeric. Also, BitlBee has to add underscores sometimes to avoid nickname collisions.
1696                        </para>
1697
1698                        <para>
1699                                While normally the BitlBee user is the only one seeing these names, they may be exposed to other chatroom participants for example when addressing someone in the channel (with or without tab completion). By default BitlBee will translate these stripped nicknames back to the original nick. If you don't want this, disable this setting.
1700                        </para>
1701                </description>
1702        </bitlbee-setting>
1703
1704        <bitlbee-setting name="type" type="string" scope="channel">
1705                <default>control</default>
1706                <possible-values>control, chat</possible-values>
1707
1708                <description>
1709                        <para>
1710                                BitlBee supports two kinds of channels: control channels (usually with a name starting with a &amp;) and chatroom channels (name usually starts with a #).
1711                        </para>
1712
1713                        <para>
1714                                See <emphasis>help channels</emphasis> for a full description of channel types in BitlBee.
1715                        </para>
1716                </description>
1717        </bitlbee-setting>
1718
1719        <bitlbee-setting name="typing_notice" type="boolean" scope="global">
1720                <default>false</default>
1721
1722                <description>
1723                        <para>
1724                                Sends you a /notice when a user starts typing a message (if supported by the IM protocol and the user's client). To use this, you most likely want to use a script in your IRC client to show this information in a more sensible way.
1725                        </para>
1726                </description>
1727        </bitlbee-setting>
1728
1729        <bitlbee-setting name="user_agent" type="string" scope="account">
1730                <default>BitlBee</default>
1731
1732                <description>
1733                        <para>
1734                                Some Jabber servers are configured to only allow a few (or even just one) kinds of XMPP clients to connect to them.
1735                        </para>
1736                       
1737                        <para>
1738                                You can change this setting to make BitlBee present itself as a different client, so that you can still connect to these servers.
1739                        </para>
1740                </description>
1741        </bitlbee-setting>
1742
1743        <bitlbee-setting name="utf8_nicks" type="boolean" scope="global">
1744                <default>false</default>
1745
1746                <description>
1747                        <para>
1748                                Officially, IRC nicknames are restricted to ASCII. Recently some clients and servers started supporting Unicode nicknames though. To enable UTF-8 nickname support (contacts only) in BitlBee, enable this setting.
1749                        </para>
1750                       
1751                        <para>
1752                                To avoid confusing old clients, this setting is disabled by default. Be careful when you try it, and be prepared to be locked out of your BitlBee in case your client interacts poorly with UTF-8 nicknames.
1753                        </para>
1754                </description>
1755        </bitlbee-setting>
1756
1757        <bitlbee-setting name="web_aware" type="string" scope="account">
1758                <default>false</default>
1759
1760                <description>
1761                        <para>
1762                                ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default.
1763                        </para>
1764
1765                        <para>
1766                                Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled.
1767                        </para>
1768                </description>
1769        </bitlbee-setting>
1770
1771        <bitlbee-setting name="xmlconsole" type="boolean" scope="account">
1772                <default>false</default>
1773
1774                <description>
1775                        <para>
1776                                The Jabber module allows you to add a buddy <emphasis>xmlconsole</emphasis> to your contact list, which will then show you the raw XMPP stream between you and the server. You can also send XMPP packets to this buddy, which will then be sent to the server.
1777                        </para>
1778                        <para>
1779                                If you want to enable this XML console permanently (and at login time already), you can set this setting.
1780                        </para>
1781                </description>
1782        </bitlbee-setting>
1783
1784        <bitlbee-command name="rename">
1785                <short-description>Rename (renick) a buddy</short-description>
1786                <syntax>rename &lt;oldnick&gt; &lt;newnick&gt;</syntax>
1787                <syntax>rename -del &lt;oldnick&gt;</syntax>
1788
1789                <description>
1790                        <para>
1791                                Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
1792                        </para>
1793                       
1794                        <para>
1795                                <emphasis>rename -del</emphasis> can be used to erase your manually set nickname for a contact and reset it to what was automatically generated.
1796                        </para>
1797                </description>
1798
1799                <ircexample>
1800                        <ircline nick="itsme">rename itsme_ you</ircline>
1801                        <ircaction nick="itsme_">is now known as <emphasis>you</emphasis></ircaction>
1802                </ircexample>
1803
1804        </bitlbee-command>
1805
1806        <bitlbee-command name="yes">
1807                <short-description>Accept a request</short-description>
1808                <syntax>yes [&lt;number&gt;]</syntax>
1809
1810                <description>
1811                        <para>
1812                                Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the <emphasis>yes</emphasis> command.
1813                        </para>
1814
1815                        <para>
1816                                By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
1817                        </para>
1818                </description>
1819
1820        </bitlbee-command>
1821
1822        <bitlbee-command name="no">
1823                <short-description>Deny a request</short-description>
1824                <syntax>no [&lt;number&gt;]</syntax>
1825
1826                <description>
1827                        <para>
1828                                Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the <emphasis>no</emphasis> command.
1829                        </para>
1830
1831                        <para>
1832                                By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
1833                        </para>
1834                </description>
1835        </bitlbee-command>
1836
1837        <bitlbee-command name="plugins">
1838                <short-description>List all the external plugins and protocols</short-description>
1839                <syntax>plugins</syntax>
1840
1841                <description>
1842                        <para>
1843                                This gives you a list of all the external plugins and protocols.
1844                        </para>
1845                </description>
1846
1847        </bitlbee-command>
1848
1849        <bitlbee-command name="qlist">
1850                <short-description>List all the unanswered questions root asked</short-description>
1851                <syntax>qlist</syntax>
1852
1853                <description>
1854                        <para>
1855                                This gives you a list of all the unanswered questions from root.
1856                        </para>
1857                </description>
1858
1859        </bitlbee-command>
1860
1861        <bitlbee-command name="register">
1862                <short-description>Register yourself</short-description>
1863                <syntax>register [&lt;password&gt;]</syntax>
1864
1865                <description>
1866                        <para>
1867                                BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the <emphasis>register</emphasis> command.
1868                        </para>
1869
1870                        <para>
1871                                Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
1872                        </para>
1873
1874                        <para>
1875                                To identify yourself in later sessions, you can use the <emphasis>identify</emphasis> command. To change your password later, you can use the <emphasis>set password</emphasis> command.
1876                        </para>
1877
1878                        <para>
1879                                You can omit the password and enter it separately using the IRC /OPER command. This lets you enter your password without your IRC client echoing it on screen or recording it in logs.
1880                        </para>
1881                </description>
1882
1883        </bitlbee-command>
1884
1885        <bitlbee-command name="identify">
1886                <syntax>identify [-noload|-force] [&lt;password&gt;]</syntax>
1887                <short-description>Identify yourself with your password</short-description>
1888
1889                <description>
1890                        <para>
1891                                BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the <emphasis>register</emphasis> command.
1892                        </para>
1893
1894                        <para>
1895                                Once you're registered, you can change your password using <emphasis>set password &lt;password&gt;</emphasis>.
1896                        </para>
1897
1898                        <para>
1899                                The <emphasis>-noload</emphasis> and <emphasis>-force</emphasis> flags can be used to identify when you're logged into some IM accounts already. <emphasis>-force</emphasis> will let you identify yourself and load all saved accounts (and keep the accounts you're logged into already).
1900                        </para>
1901                       
1902                        <para>
1903                                <emphasis>-noload</emphasis> will log you in but not load any accounts and settings saved under your current nickname. These will be overwritten once you save your settings (i.e. when you disconnect).
1904                        </para>
1905
1906                        <para>
1907                                You can omit the password and enter it separately using the IRC /OPER command. This lets you enter your password without your IRC client echoing it on screen or recording it in logs.
1908                        </para>
1909                </description>
1910        </bitlbee-command>
1911
1912        <bitlbee-command name="drop">
1913                <syntax>drop &lt;password&gt;</syntax>
1914                <short-description>Drop your account</short-description>
1915
1916                <description>
1917                        <para>
1918                                Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
1919                        </para>
1920                </description>
1921        </bitlbee-command>
1922
1923        <bitlbee-command name="blist">
1924                <syntax>blist [all|online|offline|away] [&lt;pattern&gt;]</syntax>
1925                <short-description>List all the buddies in the current channel</short-description>
1926
1927                <description>
1928                        <para>
1929                                You can get a more readable buddy list using the <emphasis>blist</emphasis> command. If you want a complete list (including the offline users) you can use the <emphasis>all</emphasis> argument.
1930                        </para>
1931
1932                        <para>
1933                                A perl-compatible regular expression can be supplied as <emphasis>pattern</emphasis> to filter the results (case-insensitive).
1934                        </para>
1935                </description>
1936
1937        </bitlbee-command>
1938
1939        <bitlbee-command name="group">
1940                <short-description>Contact group management</short-description>
1941                <syntax>group [ list | info &lt;group&gt; ]</syntax>
1942
1943                <description>
1944                        <para>
1945                                The <emphasis>group list</emphasis> command shows a list of all groups defined so far.
1946                        </para>
1947                       
1948                        <para>
1949                                The <emphasis>group info</emphasis> command shows a list of all members of a the group &lt;group&gt;.
1950                        </para>
1951                       
1952                        <para>
1953                                If you want to move contacts between groups, you can use the IRC <emphasis>/invite</emphasis> command. Also, if you use the <emphasis>add</emphasis> command in a control channel configured to show just one group, the new contact will automatically be added to that group.
1954                        </para>
1955                </description>
1956        </bitlbee-command>
1957       
1958        <bitlbee-command name="transfer">
1959                <short-description>Monitor, cancel, or reject file transfers</short-description>
1960                <syntax>transfer [&lt;cancel&gt; id | &lt;reject&gt;]</syntax>
1961               
1962                <description>
1963                        <para>
1964                                Without parameters the currently pending file transfers and their status will be listed. Available actions are <emphasis>cancel</emphasis> and <emphasis>reject</emphasis>. See <emphasis>help transfer &lt;action&gt;</emphasis> for more information.
1965                        </para>
1966
1967                        <ircexample>
1968                                <ircline nick="ulim">transfer</ircline>
1969                        </ircexample>
1970                </description>
1971               
1972                <bitlbee-command name="cancel">
1973                        <short-description>Cancels the file transfer with the given id</short-description>
1974                        <syntax>transfer &lt;cancel&gt; id</syntax>
1975
1976                        <description>
1977                                <para>Cancels the file transfer with the given id</para>
1978                        </description>
1979
1980                        <ircexample>
1981                                <ircline nick="ulim">transfer cancel 1</ircline>
1982                                <ircline nick="root">Canceling file transfer for test</ircline>
1983                        </ircexample>
1984                </bitlbee-command>
1985
1986                <bitlbee-command name="reject">
1987                        <short-description>Rejects all incoming transfers</short-description>
1988                        <syntax>transfer &lt;reject&gt;</syntax>
1989
1990                        <description>
1991                                <para>Rejects all incoming (not already transferring) file transfers. Since you probably have only one incoming transfer at a time, no id is necessary. Or is it?</para>
1992                        </description>
1993
1994                        <ircexample>
1995                                <ircline nick="ulim">transfer reject</ircline>
1996                        </ircexample>
1997                </bitlbee-command>
1998        </bitlbee-command>
1999       
2000</chapter>
Note: See TracBrowser for help on using the repository browser.