source: Makefile @ 9ae8f82

Last change on this file since 9ae8f82 was 8e6ecfe, checked in by Dennis Kaarsemaker <dennis@…>, at 2016-03-25T18:07:53Z

Authentication: scaffolding for multiple authentication backends

Instead of always putting users passwords in XML files, allow site
admins to configure a different authentication method to integrate
authentication with other systems.

This doesn't add any authentication backends yet, merely the
scaffolding. Notably:

  • Password checking and loading/removing from storage has been decoupled. A new auth_check_pass function is used to check passwords. It does check against the configured storage first, but will handle the authentication backends as well. The XML storage merely signals that a user's password should be checked using an authentication backend.
  • If unknown-to-bitlbee users identify using an authentication backend, they are automatically registered.
  • If an authentication backend is used, that fact is stored in the XML file, the password is not. Passwords are also stored unencrypted in this case, as the password used to encrypt them can change underneath us.
  • configure and Makefile changes for the backend objects
  • Property mode set to 100644
File size: 6.2 KB
Line 
1###########################
2## Makefile for BitlBee  ##
3##                       ##
4## Copyright 2002 Lintux ##
5###########################
6
7### DEFINITIONS
8
9-include Makefile.settings
10
11# Program variables
12objects = bitlbee.o dcc.o help.o ipc.o irc.o irc_im.o irc_cap.o irc_channel.o irc_commands.o irc_send.o irc_user.o irc_util.o nick.o $(OTR_BI) query.o root_commands.o set.o storage.o $(STORAGE_OBJS) auth.o $(AUTH_OBJS) unix.o conf.o log.o
13headers = $(wildcard $(_SRCDIR_)*.h $(_SRCDIR_)lib/*.h $(_SRCDIR_)protocols/*.h)
14subdirs = lib protocols
15
16OUTFILE = bitlbee
17
18# Expansion of variables
19subdirobjs = $(foreach dir,$(subdirs),$(dir)/$(dir).o)
20
21all: $(OUTFILE) $(OTR_PI) $(SKYPE_PI) doc systemd
22
23doc:
24ifdef DOC
25        $(MAKE) -C doc
26endif
27
28uninstall: uninstall-bin uninstall-doc
29        @echo -e '\nmake uninstall does not remove files in '$(DESTDIR)$(ETCDIR)', you can use make uninstall-etc to do that.\n'
30
31install: install-bin install-doc install-plugins
32        @echo
33        @echo Installed successfully
34        @echo
35        @if ! [ -d $(DESTDIR)$(CONFIG) ]; then echo -e '\nThe configuration directory $(DESTDIR)$(CONFIG) does not exist yet, don'\''t forget to create it!'; fi
36        @if ! [ -e $(DESTDIR)$(ETCDIR)/bitlbee.conf ]; then echo -e '\nNo files are installed in '$(DESTDIR)$(ETCDIR)' by make install. Run make install-etc to do that.'; fi
37ifdef SYSTEMDSYSTEMUNITDIR
38        @echo If you want to start BitlBee using systemd, try \"make install-systemd\".
39endif
40        @echo To be able to compile third party plugins, run \"make install-dev\"
41        @echo
42
43.PHONY:   install   install-bin   install-etc   install-doc install-plugins install-systemd install-dev \
44        uninstall uninstall-bin uninstall-etc uninstall-doc uninstall-etc \
45        all clean distclean tar $(subdirs) doc
46
47Makefile.settings:
48        @echo
49        @echo Run ./configure to create Makefile.settings, then rerun make
50        @echo
51
52clean: $(subdirs)
53        rm -f *.o $(OUTFILE) core utils/bitlbeed init/bitlbee*.service
54        $(MAKE) -C tests clean
55ifdef SKYPE_PI
56        $(MAKE) -C protocols/skype clean
57endif
58
59distclean: clean $(subdirs)
60        rm -rf .depend
61        rm -f Makefile.settings config.h bitlbee.pc
62        find . -name 'DEADJOE' -o -name '*.orig' -o -name '*.rej' -o -name '*~' -exec rm -f {} \;
63        @# May still be present in dirs of disabled protocols.
64        -find . -name .depend -exec rm -rf {} \;
65        $(MAKE) -C tests distclean
66
67check: all
68        $(MAKE) -C tests
69
70gcov: check
71        gcov *.c
72
73lcov: check
74        lcov --directory . --capture --output-file bitlbee.info
75        genhtml -o coverage bitlbee.info
76
77install-doc:
78ifdef DOC
79        $(MAKE) -C doc install
80endif
81ifdef SKYPE_PI
82        $(MAKE) -C protocols/skype install-doc
83endif
84
85uninstall-doc:
86ifdef DOC
87        $(MAKE) -C doc uninstall
88endif
89ifdef SKYPE_PI
90        $(MAKE) -C protocols/skype uninstall-doc
91endif
92
93install-bin:
94        mkdir -p $(DESTDIR)$(SBINDIR)
95        $(INSTALL) -m 0755 $(OUTFILE) $(DESTDIR)$(SBINDIR)/$(OUTFILE)
96
97uninstall-bin:
98        rm -f $(DESTDIR)$(SBINDIR)/$(OUTFILE)
99
100install-dev:
101        mkdir -p $(DESTDIR)$(INCLUDEDIR)
102        $(INSTALL) -m 0644 config.h $(DESTDIR)$(INCLUDEDIR)
103        for i in $(headers); do $(INSTALL) -m 0644 $$i $(DESTDIR)$(INCLUDEDIR); done
104        mkdir -p $(DESTDIR)$(PCDIR)
105        $(INSTALL) -m 0644 bitlbee.pc $(DESTDIR)$(PCDIR)
106
107uninstall-dev:
108        rm -f $(foreach hdr,$(headers),$(DESTDIR)$(INCLUDEDIR)/$(hdr))
109        -rmdir $(DESTDIR)$(INCLUDEDIR)
110        rm -f $(DESTDIR)$(PCDIR)/bitlbee.pc
111
112install-etc:
113        mkdir -p $(DESTDIR)$(ETCDIR)
114        $(INSTALL) -m 0644 $(_SRCDIR_)motd.txt $(DESTDIR)$(ETCDIR)/motd.txt
115        $(INSTALL) -m 0644 $(_SRCDIR_)bitlbee.conf $(DESTDIR)$(ETCDIR)/bitlbee.conf
116
117uninstall-etc:
118        rm -f $(DESTDIR)$(ETCDIR)/motd.txt
119        rm -f $(DESTDIR)$(ETCDIR)/bitlbee.conf
120        -rmdir $(DESTDIR)$(ETCDIR)
121
122install-plugins: install-plugin-otr install-plugin-skype
123
124install-plugin-otr:
125ifdef OTR_PI
126        mkdir -p $(DESTDIR)$(PLUGINDIR)
127        $(INSTALL) -m 0755 otr.so $(DESTDIR)$(PLUGINDIR)
128endif
129
130install-plugin-skype:
131ifdef SKYPE_PI
132        mkdir -p $(DESTDIR)$(PLUGINDIR)
133        $(INSTALL) -m 0755 skype.so $(DESTDIR)$(PLUGINDIR)
134        mkdir -p $(DESTDIR)$(ETCDIR)/../skyped $(DESTDIR)$(BINDIR)
135        $(INSTALL) -m 0644 $(_SRCDIR_)protocols/skype/skyped.cnf $(DESTDIR)$(ETCDIR)/../skyped/skyped.cnf
136        $(INSTALL) -m 0644 $(_SRCDIR_)protocols/skype/skyped.conf.dist $(DESTDIR)$(ETCDIR)/../skyped/skyped.conf
137        $(INSTALL) -m 0755 $(_SRCDIR_)protocols/skype/skyped.py $(DESTDIR)$(BINDIR)/skyped
138        $(MAKE) -C protocols/skype install-doc
139endif
140
141systemd:
142ifdef SYSTEMDSYSTEMUNITDIR
143        mkdir -p init
144        sed 's|@sbindir@|$(SBINDIR)|' $(_SRCDIR_)init/bitlbee.service.in > init/bitlbee.service
145        sed 's|@sbindir@|$(SBINDIR)|' $(_SRCDIR_)init/bitlbee@.service.in > init/bitlbee@.service
146endif
147
148install-systemd: systemd
149ifdef SYSTEMDSYSTEMUNITDIR
150        mkdir -p $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
151        $(INSTALL) -m 0644 init/bitlbee.service $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
152        $(INSTALL) -m 0644 init/bitlbee@.service $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
153        $(INSTALL) -m 0644 $(_SRCDIR_)init/bitlbee.socket $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
154else
155        @echo SYSTEMDSYSTEMUNITDIR not set, not installing systemd unit files.
156endif
157
158tar:
159        fakeroot debian/rules clean || make distclean
160        x=$$(basename $$(pwd)); \
161        cd ..; \
162        tar czf $$x.tar.gz --exclude=debian --exclude=.git* --exclude=.depend $$x
163
164$(subdirs):
165        @$(MAKE) -C $@ $(MAKECMDGOALS)
166
167$(OTR_PI): %.so: $(_SRCDIR_)%.c
168        @echo '*' Building plugin $@
169        @$(CC) $(CFLAGS) -fPIC -shared $(LDFLAGS) $< -o $@ $(OTRFLAGS)
170
171$(SKYPE_PI): $(_SRCDIR_)protocols/skype/skype.c
172        @echo '*' Building plugin skype
173        @$(CC) $(CFLAGS) $(LDFLAGS) $(SKYPEFLAGS) $< -o $@
174
175$(objects): %.o: $(_SRCDIR_)%.c
176        @echo '*' Compiling $<
177        @$(CC) -c $(CFLAGS) $(CFLAGS_BITLBEE) $< -o $@
178
179$(objects): Makefile Makefile.settings config.h
180
181$(OUTFILE): $(objects) $(subdirs)
182        @echo '*' Linking $(OUTFILE)
183        @$(CC) $(objects) $(subdirobjs) -o $(OUTFILE) $(LDFLAGS_BITLBEE) $(LDFLAGS) $(EFLAGS)
184ifndef DEBUG
185        @echo '*' Stripping $(OUTFILE)
186        @-$(STRIP) $(OUTFILE)
187endif
188
189ctags: 
190        ctags `find . -name "*.c"` `find . -name "*.h"`
191
192# Using this as a bogus Make target to test if a GNU-compatible version of
193# make is available.
194helloworld:
195        @echo Hello World
196
197# Check if we can load the helpfile. (This fails if some article is >1KB.)
198# If print returns a NULL pointer, the file is unusable.
199testhelp: doc
200        gdb --eval-command='b main' --eval-command='r' \
201            --eval-command='print help_init(&global->helpfile, "doc/user-guide/help.txt")' \
202            $(OUTFILE) < /dev/null
203
204-include .depend/*.d
205# DO NOT DELETE
Note: See TracBrowser for help on using the repository browser.