source: Makefile @ f710673

Last change on this file since f710673 was 355e2ad, checked in by dequis <dx@…>, at 2015-10-01T01:01:48Z

Move CAP commands to irc_cap.c; use enum for flags

  • Property mode set to 100644
File size: 6.2 KB
RevLine 
[b7d3cc34]1###########################
2## Makefile for BitlBee  ##
3##                       ##
4## Copyright 2002 Lintux ##
5###########################
6
7### DEFINITIONS
8
9-include Makefile.settings
10
11# Program variables
[355e2ad]12objects = bitlbee.o dcc.o help.o ipc.o irc.o irc_im.o irc_cap.o irc_channel.o irc_commands.o irc_send.o irc_user.o irc_util.o nick.o $(OTR_BI) query.o root_commands.o set.o storage.o $(STORAGE_OBJS) unix.o conf.o log.o
[ebe2c5e]13headers = $(wildcard $(_SRCDIR_)*.h $(_SRCDIR_)lib/*.h $(_SRCDIR_)protocols/*.h)
[84b045d]14subdirs = lib protocols
[b7d3cc34]15
[e252d8c]16OUTFILE = bitlbee
[d1d6776]17
[b7d3cc34]18# Expansion of variables
19subdirobjs = $(foreach dir,$(subdirs),$(dir)/$(dir).o)
20
[4b53c65]21all: $(OUTFILE) $(OTR_PI) $(SKYPE_PI) doc systemd
[b7d3cc34]22
[4b53c65]23doc:
[a85a8ab]24ifdef DOC
[4b53c65]25        $(MAKE) -C doc
[a85a8ab]26endif
[4b53c65]27
[cdb92c5]28uninstall: uninstall-bin uninstall-doc
[b7d3cc34]29        @echo -e '\nmake uninstall does not remove files in '$(DESTDIR)$(ETCDIR)', you can use make uninstall-etc to do that.\n'
30
[c564e25]31install: install-bin install-doc install-plugins
[3e6cdb6]32        @echo
33        @echo Installed successfully
34        @echo
[b7d3cc34]35        @if ! [ -d $(DESTDIR)$(CONFIG) ]; then echo -e '\nThe configuration directory $(DESTDIR)$(CONFIG) does not exist yet, don'\''t forget to create it!'; fi
36        @if ! [ -e $(DESTDIR)$(ETCDIR)/bitlbee.conf ]; then echo -e '\nNo files are installed in '$(DESTDIR)$(ETCDIR)' by make install. Run make install-etc to do that.'; fi
[c564e25]37ifdef SYSTEMDSYSTEMUNITDIR
38        @echo If you want to start BitlBee using systemd, try \"make install-systemd\".
39endif
[3e6cdb6]40        @echo To be able to compile third party plugins, run \"make install-dev\"
[b7d3cc34]41        @echo
42
[3e6cdb6]43.PHONY:   install   install-bin   install-etc   install-doc install-plugins install-systemd install-dev \
44        uninstall uninstall-bin uninstall-etc uninstall-doc uninstall-etc \
[4b53c65]45        all clean distclean tar $(subdirs) doc
[b7d3cc34]46
47Makefile.settings:
48        @echo
49        @echo Run ./configure to create Makefile.settings, then rerun make
50        @echo
51
52clean: $(subdirs)
[c14959d]53        rm -f *.o $(OUTFILE) core utils/bitlbeed init/bitlbee*.service
[66b9e86e]54        $(MAKE) -C tests clean
[757e1e0]55ifdef SKYPE_PI
56        $(MAKE) -C protocols/skype clean
57endif
[b7d3cc34]58
59distclean: clean $(subdirs)
[b0a89cc]60        rm -rf .depend
[b3c467b]61        rm -f Makefile.settings config.h bitlbee.pc
[34c0e90]62        find . -name 'DEADJOE' -o -name '*.orig' -o -name '*.rej' -o -name '*~' -exec rm -f {} \;
[b0a89cc]63        @# May still be present in dirs of disabled protocols.
[b41d5d2]64        -find . -name .depend -exec rm -rf {} \;
[dcf0f3e]65        $(MAKE) -C tests distclean
[b7d3cc34]66
[66b9e86e]67check: all
[c2fa827]68        $(MAKE) -C tests
69
[66b9e86e]70gcov: check
71        gcov *.c
72
[348c11b]73lcov: check
74        lcov --directory . --capture --output-file bitlbee.info
75        genhtml -o coverage bitlbee.info
76
[b7d3cc34]77install-doc:
[a85a8ab]78ifdef DOC
[b7d3cc34]79        $(MAKE) -C doc install
[a85a8ab]80endif
[5155570]81ifdef SKYPE_PI
82        $(MAKE) -C protocols/skype install-doc
83endif
[b7d3cc34]84
85uninstall-doc:
[a85a8ab]86ifdef DOC
[b7d3cc34]87        $(MAKE) -C doc uninstall
[a85a8ab]88endif
[5155570]89ifdef SKYPE_PI
90        $(MAKE) -C protocols/skype uninstall-doc
91endif
[b7d3cc34]92
93install-bin:
[57da960]94        mkdir -p $(DESTDIR)$(SBINDIR)
[ba3506e]95        $(INSTALL) -m 0755 $(OUTFILE) $(DESTDIR)$(SBINDIR)/$(OUTFILE)
[b7d3cc34]96
97uninstall-bin:
[57da960]98        rm -f $(DESTDIR)$(SBINDIR)/$(OUTFILE)
[b7d3cc34]99
[cdb92c5]100install-dev:
[e506d6c]101        mkdir -p $(DESTDIR)$(INCLUDEDIR)
[ba3506e]102        $(INSTALL) -m 0644 config.h $(DESTDIR)$(INCLUDEDIR)
[ebe2c5e]103        for i in $(headers); do $(INSTALL) -m 0644 $$i $(DESTDIR)$(INCLUDEDIR); done
[e506d6c]104        mkdir -p $(DESTDIR)$(PCDIR)
[ba3506e]105        $(INSTALL) -m 0644 bitlbee.pc $(DESTDIR)$(PCDIR)
[e506d6c]106
[cdb92c5]107uninstall-dev:
108        rm -f $(foreach hdr,$(headers),$(DESTDIR)$(INCLUDEDIR)/$(hdr))
109        -rmdir $(DESTDIR)$(INCLUDEDIR)
[e506d6c]110        rm -f $(DESTDIR)$(PCDIR)/bitlbee.pc
111
[b7d3cc34]112install-etc:
113        mkdir -p $(DESTDIR)$(ETCDIR)
[ba3506e]114        $(INSTALL) -m 0644 $(_SRCDIR_)motd.txt $(DESTDIR)$(ETCDIR)/motd.txt
115        $(INSTALL) -m 0644 $(_SRCDIR_)bitlbee.conf $(DESTDIR)$(ETCDIR)/bitlbee.conf
[b7d3cc34]116
117uninstall-etc:
118        rm -f $(DESTDIR)$(ETCDIR)/motd.txt
119        rm -f $(DESTDIR)$(ETCDIR)/bitlbee.conf
120        -rmdir $(DESTDIR)$(ETCDIR)
121
[57da960]122install-plugins: install-plugin-otr install-plugin-skype
123
124install-plugin-otr:
[858ea01]125ifdef OTR_PI
126        mkdir -p $(DESTDIR)$(PLUGINDIR)
[ba3506e]127        $(INSTALL) -m 0755 otr.so $(DESTDIR)$(PLUGINDIR)
[858ea01]128endif
[57da960]129
130install-plugin-skype:
[370899f]131ifdef SKYPE_PI
132        mkdir -p $(DESTDIR)$(PLUGINDIR)
[ba3506e]133        $(INSTALL) -m 0755 skype.so $(DESTDIR)$(PLUGINDIR)
[57da960]134        mkdir -p $(DESTDIR)$(ETCDIR)/../skyped $(DESTDIR)$(BINDIR)
[ba3506e]135        $(INSTALL) -m 0644 $(_SRCDIR_)protocols/skype/skyped.cnf $(DESTDIR)$(ETCDIR)/../skyped/skyped.cnf
136        $(INSTALL) -m 0644 $(_SRCDIR_)protocols/skype/skyped.conf.dist $(DESTDIR)$(ETCDIR)/../skyped/skyped.conf
137        $(INSTALL) -m 0755 $(_SRCDIR_)protocols/skype/skyped.py $(DESTDIR)$(BINDIR)/skyped
[cb90dc9]138        $(MAKE) -C protocols/skype install-doc
[370899f]139endif
[858ea01]140
[417002e]141systemd:
142ifdef SYSTEMDSYSTEMUNITDIR
[0edb57f]143        mkdir -p init
144        sed 's|@sbindir@|$(SBINDIR)|' $(_SRCDIR_)init/bitlbee.service.in > init/bitlbee.service
145        sed 's|@sbindir@|$(SBINDIR)|' $(_SRCDIR_)init/bitlbee@.service.in > init/bitlbee@.service
[417002e]146endif
147
[a6c59bb]148install-systemd: systemd
[417002e]149ifdef SYSTEMDSYSTEMUNITDIR
150        mkdir -p $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
[ba3506e]151        $(INSTALL) -m 0644 init/bitlbee.service $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
152        $(INSTALL) -m 0644 init/bitlbee@.service $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
[0edb57f]153        $(INSTALL) -m 0644 $(_SRCDIR_)init/bitlbee.socket $(DESTDIR)$(SYSTEMDSYSTEMUNITDIR)
[417002e]154else
[ebe2c5e]155        @echo SYSTEMDSYSTEMUNITDIR not set, not installing systemd unit files.
[417002e]156endif
157
[b7d3cc34]158tar:
159        fakeroot debian/rules clean || make distclean
160        x=$$(basename $$(pwd)); \
161        cd ..; \
[61d21e5b]162        tar czf $$x.tar.gz --exclude=debian --exclude=.git* --exclude=.depend $$x
[b7d3cc34]163
164$(subdirs):
165        @$(MAKE) -C $@ $(MAKECMDGOALS)
166
[7fa5c19]167$(OTR_PI): %.so: $(_SRCDIR_)%.c
[858ea01]168        @echo '*' Building plugin $@
[9fc017d]169        @$(CC) $(CFLAGS) -fPIC -shared $(LDFLAGS) $< -o $@ $(OTRFLAGS)
[858ea01]170
[7fa5c19]171$(SKYPE_PI): $(_SRCDIR_)protocols/skype/skype.c
[370899f]172        @echo '*' Building plugin skype
[d203495]173        @$(CC) $(CFLAGS) $(LDFLAGS) $(SKYPEFLAGS) $< -o $@
[370899f]174
[7fa5c19]175$(objects): %.o: $(_SRCDIR_)%.c
[b7d3cc34]176        @echo '*' Compiling $<
[7281ad1]177        @$(CC) -c $(CFLAGS) $(CFLAGS_BITLBEE) $< -o $@
[b7d3cc34]178
179$(objects): Makefile Makefile.settings config.h
180
181$(OUTFILE): $(objects) $(subdirs)
182        @echo '*' Linking $(OUTFILE)
[d203495]183        @$(CC) $(objects) $(subdirobjs) -o $(OUTFILE) $(LDFLAGS_BITLBEE) $(LDFLAGS) $(EFLAGS)
[b7d3cc34]184ifndef DEBUG
185        @echo '*' Stripping $(OUTFILE)
186        @-$(STRIP) $(OUTFILE)
187endif
188
189ctags: 
190        ctags `find . -name "*.c"` `find . -name "*.h"`
[4fca1db]191
192# Using this as a bogus Make target to test if a GNU-compatible version of
193# make is available.
194helloworld:
195        @echo Hello World
[b0a89cc]196
[4b53c65]197# Check if we can load the helpfile. (This fails if some article is >1KB.)
198# If print returns a NULL pointer, the file is unusable.
199testhelp: doc
200        gdb --eval-command='b main' --eval-command='r' \
201            --eval-command='print help_init(&global->helpfile, "doc/user-guide/help.txt")' \
202            $(OUTFILE) < /dev/null
203
[b0a89cc]204-include .depend/*.d
[a0c6fc5]205# DO NOT DELETE
Note: See TracBrowser for help on using the repository browser.