source: doc/user-guide/commands.xml @ 398b3198

Last change on this file since 398b3198 was 398b3198, checked in by dequis <dx@…>, at 2016-12-27T06:53:22Z

Doc tweaks for chat list, and stop suggesting 'chat' is deprecated

There's a functionality change buried here, but it's one that people
shouldn't be using anyway.

  • Property mode set to 100644
File size: 79.8 KB
Line 
1<chapter id="commands">
2        <title>Bitlbee commands</title>
3
4        <command-list/>
5
6        <bitlbee-command name="account">
7                <short-description>IM-account list maintenance</short-description>
8                <syntax>account [&lt;account id&gt;] &lt;action&gt; [&lt;arguments&gt;]</syntax>
9
10                <description>
11
12                        <para>
13                                Available actions: add, del, list, on, off and set. See <emphasis>help account &lt;action&gt;</emphasis> for more information.
14                        </para>
15
16                </description>
17
18                <bitlbee-command name="add">
19                        <syntax>account add &lt;protocol&gt; &lt;username&gt; [&lt;password&gt;]</syntax>
20
21                        <description>
22                                <para>
23                                        Adds an account on the given server with the specified protocol, username and password to the account list. For a list of supported protocols, use the <emphasis>plugins</emphasis> command. For more information about adding an account, see <emphasis>help account add &lt;protocol&gt;</emphasis>.
24                                </para>
25
26                                <para>
27                                        You can omit the password and enter it separately using the IRC /OPER command. This lets you enter your password without your IRC client echoing it on screen or recording it in logs.
28                                </para>
29                        </description>
30                       
31                        <bitlbee-command name="jabber">
32                                <syntax>account add jabber &lt;handle@server.tld&gt; [&lt;password&gt;]</syntax>
33
34                                <description>
35                                        <para>
36                                                The handle should be a full handle, including the domain name. You can specify a servername if necessary. Normally BitlBee doesn't need this though, since it's able to find out the server by doing DNS SRV lookups.
37                                        </para>
38
39                                        <para>
40                                                In previous versions it was also possible to specify port numbers and/or SSL in the server tag. This is deprecated and should now be done using the <emphasis>account set</emphasis> command. This also applies to specifying a resource in the handle (like <emphasis>wilmer@bitlbee.org/work</emphasis>).
41                                        </para>
42                                </description>
43                        </bitlbee-command>
44
45                        <bitlbee-command name="msn">
46                                <syntax>account add msn &lt;handle@server.tld&gt; [&lt;password&gt;]</syntax>
47
48                                <description>
49                                        <para>
50                                                For MSN connections there are no special arguments.
51                                        </para>
52                                </description>
53                        </bitlbee-command>
54                       
55                        <bitlbee-command name="oscar">
56                                <syntax>account add oscar &lt;handle&gt; [&lt;password&gt;]</syntax>
57
58                                <description>
59                                        <para>
60                                                OSCAR is the protocol used to connect to AIM and/or ICQ. The servers will automatically detect if you're using a numeric or non-numeric username so there's no need to tell which network you want to connect to.
61                                        </para>
62                                </description>
63
64                                <ircexample>
65                                        <ircline nick="wilmer">account add oscar 72696705 hobbelmeeuw</ircline>
66                                        <ircline nick="root">Account successfully added</ircline>
67                                </ircexample>
68                        </bitlbee-command>
69                       
70                        <bitlbee-command name="twitter">
71                                <syntax>account add twitter &lt;handle&gt;</syntax>
72
73                                <description>
74                                        <para>
75                                                This module gives you simple access to Twitter and Twitter API compatible services.
76                                        </para>
77                                       
78                                        <para>
79                                                By default all your Twitter contacts will appear in a new channel called #twitter_yourusername. You can change this behaviour using the <emphasis>mode</emphasis> setting (see <emphasis>help set mode</emphasis>).
80                                        </para>
81                                       
82                                        <para>
83                                                To send tweets yourself, send them to the twitter_(yourusername) contact, or just write in the groupchat channel if you enabled that option.
84                                        </para>
85
86                                        <para>
87                                                Since Twitter now requires OAuth authentication, you should not enter your Twitter password into BitlBee. Just type a bogus password. The first time you log in, BitlBee will start OAuth authentication. (See <emphasis>help set oauth</emphasis>.)
88                                        </para>
89                                       
90                                        <para>
91                                                To use a non-Twitter service, change the <emphasis>base_url</emphasis> setting. For identi.ca, you can simply use <emphasis>account add identica</emphasis>.
92                                        </para>
93                                </description>
94                        </bitlbee-command>
95                       
96                        <bitlbee-command name="identica">
97                                <syntax>account add identica &lt;handle&gt;</syntax>
98
99                                <description>
100                                        <para>
101                                                Same protocol as <emphasis>twitter</emphasis>, but defaults to a <emphasis>base_url</emphasis> pointing at identi.ca. It also works with OAuth (so don't specify your password).
102                                        </para>
103                                </description>
104                        </bitlbee-command>
105
106                </bitlbee-command>
107
108                <bitlbee-command name="del">
109                        <syntax>account &lt;account id&gt; del</syntax>
110
111                        <description>
112                                <para>
113                                        This command deletes an account from your account list. You should signoff the account before deleting it.
114                                </para>
115
116
117                                <para>
118                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
119                                </para>
120                        </description>
121                </bitlbee-command>
122
123                <bitlbee-command name="on">
124                        <syntax>account [&lt;account id&gt;] on</syntax>
125
126                        <description>
127                                <para>
128                                        This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set.
129                                </para>
130
131                                <para>
132                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
133                                </para>
134                        </description>
135
136                </bitlbee-command>
137
138                <bitlbee-command name="off">
139                        <syntax>account [&lt;account id&gt;] off</syntax>
140
141                        <description>
142                                <para>
143                                        This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects.
144                                </para>
145
146                                <para>
147                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
148                                </para>
149                        </description>
150                </bitlbee-command>
151
152                <bitlbee-command name="list">
153                        <syntax>account list</syntax>
154
155                        <description>
156                                <para>
157                                        This command gives you a list of all the accounts known by BitlBee.
158                                </para>
159                        </description>
160                </bitlbee-command>
161
162                <bitlbee-command name="set">
163                        <syntax>account &lt;account id&gt; set</syntax>
164                        <syntax>account &lt;account id&gt; set &lt;setting&gt;</syntax>
165                        <syntax>account &lt;account id&gt; set &lt;setting&gt; &lt;value&gt;</syntax>
166                        <syntax>account &lt;account id&gt; set -del &lt;setting&gt;</syntax>
167
168                        <description>
169                                <para>
170                                        This command can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing <emphasis>account &lt;account id&gt; set</emphasis>.
171                                </para>
172                               
173                                <para>
174                                        For more information about a setting, see <emphasis>help set &lt;setting&gt;</emphasis>.
175                                </para>
176                               
177                                <para>
178                                        The account ID can be a number/tag (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
179                                </para>
180                        </description>
181                </bitlbee-command>
182        </bitlbee-command>
183
184        <bitlbee-command name="channel">
185                <short-description>Channel list maintenance</short-description>
186                <syntax>channel [&lt;account id&gt;] &lt;action&gt; [&lt;arguments&gt;]</syntax>
187
188                <description>
189                        <para>
190                                Available actions: del, list, set. See <emphasis>help channel &lt;action&gt;</emphasis> for more information.
191                        </para>
192                       
193                        <para>
194                                There is no <emphasis>channel add</emphasis> command. To create a new channel, just use the IRC <emphasis>/join</emphasis> command. See also <emphasis>help channels</emphasis> and <emphasis>help groupchats</emphasis>.
195                        </para>
196                </description>
197
198                <bitlbee-command name="del">
199                        <syntax>channel &lt;channel id&gt; del</syntax>
200
201                        <description>
202                                <para>
203                                        Remove a channel and forget all its settings. You can only remove channels you're not currently in, and can't remove the main control channel. (You can, however, leave it.)
204                                </para>
205                        </description>
206
207                </bitlbee-command>
208
209                <bitlbee-command name="list">
210                        <syntax>channel list</syntax>
211
212                        <description>
213                                <para>
214                                        This command gives you a list of all the channels you configured.
215                                </para>
216                        </description>
217
218                </bitlbee-command>
219
220                <bitlbee-command name="set">
221                        <syntax>channel [&lt;channel id&gt;] set</syntax>
222                        <syntax>channel [&lt;channel id&gt;] set &lt;setting&gt;</syntax>
223                        <syntax>channel [&lt;channel id&gt;] set &lt;setting&gt; &lt;value&gt;</syntax>
224                        <syntax>channel [&lt;channel id&gt;] set -del &lt;setting&gt;</syntax>
225
226                        <description>
227                                <para>
228                                        This command can be used to change various settings for channels. Different channel types support different settings. You can see the settings available for a channel by typing <emphasis>channel &lt;channel id&gt; set</emphasis>.
229                                </para>
230                               
231                                <para>
232                                        For more information about a setting, see <emphasis>help set &lt;setting&gt;</emphasis>.
233                                </para>
234                               
235                                <para>
236                                        The channel ID can be a number (see <emphasis>channel list</emphasis>), or (part of) its name, as long as it matches only one channel. If you want to change settings of the current channel, you can omit the channel ID.
237                                </para>
238                        </description>
239                </bitlbee-command>
240
241        </bitlbee-command>
242
243        <bitlbee-command name="chat">
244                <short-description>Chatroom list maintenance</short-description>
245                <syntax>chat &lt;action&gt; [&lt;arguments&gt;]</syntax>
246
247                <description>
248
249                        <para>
250                                Available actions: add, with, list. See <emphasis>help chat &lt;action&gt;</emphasis> for more information.
251                        </para>
252
253                </description>
254
255                <bitlbee-command name="add">
256                        <syntax>chat add &lt;account id&gt; &lt;room|!index&gt; [&lt;channel&gt;]</syntax>
257
258                        <description>
259                                <para>
260                                        Add a chatroom to the list of chatrooms you're interested in. BitlBee needs this list to map room names to a proper IRC channel name.
261                                </para>
262
263                                <para>
264                                        After adding a room to your list, you can simply use the IRC /join command to enter the room. Also, you can tell BitlBee to automatically join the room when you log in. (<emphasis>channel &lt;channel&gt; set auto_join true</emphasis>)
265                                </para>
266
267                                <para>
268                                        Password-protected rooms work exactly like on IRC, by passing the password as an extra argument to /join.
269                                </para>
270                        </description>
271
272                </bitlbee-command>
273
274                <bitlbee-command name="list">
275                        <syntax>chat list &lt;account id&gt; [&lt;server&gt;]</syntax>
276
277                        <description>
278                                <para>
279                                        List existing named chatrooms provided by an account. Chats from this list can be referenced from <emphasis>chat add</emphasis> by using the number in the index column after a "!" as a shortcut.
280                                </para>
281
282                                <para>
283                                        The server parameter is optional and currently only used by jabber.
284                                </para>
285                        </description>
286
287                        <ircexample>
288                                <ircline nick="dx">chat list facebook</ircline>
289                                <ircline pre="1" nick="root">Index  Title                 Topic</ircline>
290                                <ircline pre="1" nick="root">    1  869891016470949       cool kids club</ircline>
291                                <ircline pre="1" nick="root">    2  457892181062459       uncool kids club</ircline>
292                                <ircline nick="root">2 facebook chatrooms</ircline>
293                                <ircline nick="dx">chat add facebook !1 #cool-kids-club</ircline>
294                        </ircexample>
295                </bitlbee-command>
296
297                <bitlbee-command name="with">
298                        <syntax>chat with &lt;nickname&gt;</syntax>
299
300                        <description>
301                                <para>
302                                        While most <emphasis>chat</emphasis> subcommands are about named chatrooms, this command can be used to open an unnamed groupchat with one or more persons. This command is what <emphasis>/join #nickname</emphasis> used to do in older BitlBee versions.
303                                </para>
304
305                                <para>
306                                        Another way to do this is to join to a new, empty channel with <emphasis>/join #newchannel</emphasis> and invite the first person with <emphasis>/invite nickname</emphasis>
307                                </para>
308                        </description>
309                </bitlbee-command>
310        </bitlbee-command>
311
312        <bitlbee-command name="add">
313                <short-description>Add a buddy to your contact list</short-description>
314                <syntax>add &lt;account id&gt; &lt;handle&gt; [&lt;nick&gt;]</syntax>
315                <syntax>add -tmp &lt;account id&gt; &lt;handle&gt; [&lt;nick&gt;]</syntax>
316
317                <description>
318                        <para>
319                                Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
320                        </para>
321
322                        <para>
323                                If you want, you can also tell BitlBee what nick to give the new contact. The -tmp option adds the buddy to the internal BitlBee structures only, not to the real contact list (like done by <emphasis>set handle_unknown add</emphasis>). This allows you to talk to people who are not in your contact list. This normally won't show you any presence notifications.
324                        </para>
325
326                        <para>
327                                If you use this command in a control channel containing people from only one group, the new contact will be added to that group automatically.
328                        </para>
329                </description>
330
331                <ircexample>
332                        <ircline nick="ctrlsoft">add 3 gryp@jabber.org grijp</ircline>
333                        <ircaction nick="grijp" hostmask="gryp@jabber.org">has joined <emphasis>&amp;bitlbee</emphasis></ircaction>
334                </ircexample>
335        </bitlbee-command>
336
337        <bitlbee-command name="info">
338                <short-description>Request user information</short-description>
339                <syntax>info &lt;connection&gt; &lt;handle&gt;</syntax>
340                <syntax>info &lt;nick&gt;</syntax>
341
342                <description>
343                        <para>
344                                Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols it'll give you an URL which you can visit with a normal web browser to get the information.
345                        </para>
346                </description>
347
348                <ircexample>
349                        <ircline nick="ctrlsoft">info 0 72696705</ircline>
350                        <ircline nick="root">User info - UIN: 72696705   Nick: Lintux   First/Last name: Wilmer van der Gaast   E-mail: lintux@lintux.cx</ircline>
351                </ircexample>
352
353        </bitlbee-command>
354
355        <bitlbee-command name="remove">
356                <short-description>Remove a buddy from your contact list</short-description>
357                <syntax>remove &lt;nick&gt;</syntax>
358
359                <description>
360                        <para>
361                                Removes the specified nick from your buddy list.
362                        </para>
363                </description>
364
365                <ircexample>
366                        <ircline nick="ctrlsoft">remove gryp</ircline>
367                        <ircaction nick="gryp" hostmask="gryp@jabber.jabber.org">has quit <emphasis>[Leaving...]</emphasis></ircaction>
368                </ircexample>
369
370        </bitlbee-command>
371
372        <bitlbee-command name="block">
373                <short-description>Block someone</short-description>
374                <syntax>block &lt;nick&gt;</syntax>
375                <syntax>block &lt;connection&gt; &lt;handle&gt;</syntax>
376                <syntax>block &lt;connection&gt;</syntax>
377
378                <description>
379                        <para>
380                                Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
381                        </para>
382                       
383                        <para>
384                                When called with only a connection specification as an argument, the command displays the current block list for that connection.
385                        </para>
386                </description>
387        </bitlbee-command>
388
389        <bitlbee-command name="allow">
390                <short-description>Unblock someone</short-description>
391                <syntax>allow &lt;nick&gt;</syntax>
392                <syntax>allow &lt;connection&gt; &lt;handle&gt;</syntax>
393
394                <description>
395                        <para>
396                                Reverse of block. Unignores the specified user or user handle on specified connection.
397                        </para>
398                       
399                        <para>
400                                When called with only a connection specification as an argument, the command displays the current allow list for that connection.
401                        </para>
402                </description>
403        </bitlbee-command>
404       
405        <bitlbee-command name="otr">
406                <short-description>Off-the-Record encryption control</short-description>
407                <syntax>otr &lt;subcommand&gt; [&lt;arguments&gt;]</syntax>
408
409                <description>
410
411                        <para>
412                                Available subcommands: connect, disconnect, reconnect, smp, smpq, trust, info, keygen, and forget. See <emphasis>help otr &lt;subcommand&gt;</emphasis> for more information.
413                        </para>
414
415                </description>
416               
417                <bitlbee-command name="connect">
418                        <syntax>otr connect &lt;nick&gt;</syntax>
419                       
420                        <description>
421                       
422                                <para>
423                                        Attempts to establish an encrypted connection with the specified user by sending a magic string.
424                                </para>
425                               
426                        </description>
427               
428                </bitlbee-command>
429               
430                <bitlbee-command name="disconnect">
431                        <syntax>otr disconnect &lt;nick&gt;</syntax>
432                        <syntax>otr disconnect *</syntax>
433                       
434                        <description>
435                       
436                                <para>
437                                        Resets the connection with the specified user/all users to cleartext.
438                                </para>
439                               
440                        </description>
441               
442                </bitlbee-command>
443               
444                <bitlbee-command name="reconnect">
445                        <syntax>otr reconnect &lt;nick&gt;</syntax>
446                       
447                        <description>
448                       
449                                <para>
450                                        Breaks and re-establishes the encrypted connection with the specified user. Useful if something got desynced.
451                                </para>
452                               
453                                <para>
454                                        Equivalent to <emphasis>otr disconnect</emphasis> followed by <emphasis>otr connect</emphasis>.
455                                </para>
456                               
457                        </description>
458               
459                </bitlbee-command>
460               
461                <bitlbee-command name="smp">
462                        <syntax>otr smp &lt;nick&gt; &lt;secret&gt;</syntax>
463                       
464                        <description>
465                       
466                                <para>
467                                        Attempts to authenticate the given user's active fingerprint via the Socialist Millionaires' Protocol.
468                                </para>
469                               
470                                <para>
471                                        If an SMP challenge has been received from the given user, responds with the specified secret/answer. Otherwise, sends a challenge for the given secret.
472                                </para>
473                               
474                                <para>
475                                        Note that there are two flavors of SMP challenges: "shared-secret" and "question &amp; answer". This command is used to respond to both of them, or to initiate a shared-secret style exchange. Use the <emphasis>otr smpq</emphasis> command to initiate a "Q&amp;A" session.
476                                </para>
477                               
478                                <para>
479                                        When responding to a "Q&amp;A" challenge, the local trust value is not altered. Only the <emphasis>asking party</emphasis> sets trust in the case of success. Use <emphasis>otr smpq</emphasis> to pose your challenge. In a shared-secret exchange, both parties set their trust according to the outcome.
480                                </para>
481                               
482                        </description>
483               
484                </bitlbee-command>
485               
486                <bitlbee-command name="smpq">
487                        <syntax>otr smpq &lt;nick&gt; &lt;question&gt; &lt;answer&gt;</syntax>
488                       
489                        <description>
490                       
491                                <para>
492                                        Attempts to authenticate the given user's active fingerprint via the Socialist Millionaires' Protocol, Q&amp;A style.
493                                </para>
494
495                                <para>
496                                        Initiates an SMP session in "question &amp; answer" style. The question is transmitted with the initial SMP packet and used to prompt the other party. You must be confident that only they know the answer. If the protocol succeeds (i.e. they answer correctly), the fingerprint will be trusted. Note that the answer must be entered exactly, case and punctuation count!
497                                </para>
498                               
499                                <para>
500                                        Note that this style of SMP only affects the trust setting on your side. Expect your opponent to send you their own challenge. Alternatively, if you and the other party have a shared secret, use the <emphasis>otr smp</emphasis> command.
501                                </para>
502                               
503                        </description>
504               
505                </bitlbee-command>
506               
507                <bitlbee-command name="trust">
508                        <syntax>otr trust &lt;nick&gt; &lt;fp1&gt; &lt;fp2&gt; &lt;fp3&gt; &lt;fp4&gt; &lt;fp5&gt;</syntax>
509                       
510                        <description>
511                       
512                                <para>
513                                        Manually affirms trust in the specified fingerprint, given as five blocks of precisely eight (hexadecimal) digits each.
514                                </para>
515                               
516                        </description>
517               
518                </bitlbee-command>
519               
520                <bitlbee-command name="info">
521                        <syntax>otr info</syntax>
522                        <syntax>otr info &lt;nick&gt;</syntax>
523                       
524                        <description>
525                       
526                                <para>
527                                        Shows information about the OTR state. The first form lists our private keys and current OTR contexts. The second form displays information about the connection with a given user, including the list of their known fingerprints.
528                                </para>
529                               
530                        </description>
531               
532                </bitlbee-command>
533               
534                <bitlbee-command name="keygen">
535                        <syntax>otr keygen &lt;account-no&gt;</syntax>
536                       
537                        <description>
538                       
539                                <para>
540                                        Generates a new OTR private key for the given account.
541                                </para>
542                               
543                        </description>
544               
545                </bitlbee-command>
546               
547                <bitlbee-command name="forget">
548                        <syntax>otr forget &lt;thing&gt; &lt;arguments&gt;</syntax>
549                       
550                        <description>
551                       
552                                <para>
553                                        Forgets some part of our OTR userstate. Available things: fingerprint, context, and key. See <emphasis>help otr forget &lt;thing&gt;</emphasis> for more information.
554                                </para>
555                       
556                        </description>
557                       
558                        <bitlbee-command name="fingerprint">
559                                <syntax>otr forget fingerprint &lt;nick&gt; &lt;fingerprint&gt;</syntax>
560                               
561                                <description>
562                               
563                                        <para>
564                                                Drops the specified fingerprint from the given user's OTR connection context. It is allowed to specify only a (unique) prefix of the desired fingerprint.
565                                        </para>
566                                       
567                                </description>
568                               
569                        </bitlbee-command>
570                               
571                        <bitlbee-command name="context">
572                                <syntax>otr forget context &lt;nick&gt;</syntax>
573                               
574                                <description>
575                               
576                                        <para>
577                                                Forgets the entire OTR context associated with the given user. This includes current message and protocol states, as well as any fingerprints for that user.
578                                        </para>
579                                       
580                                </description>
581                               
582                        </bitlbee-command>
583
584                        <bitlbee-command name="key">
585                                <syntax>otr forget key &lt;fingerprint&gt;</syntax>
586                               
587                                <description>
588                               
589                                        <para>
590                                                Forgets an OTR private key matching the specified fingerprint. It is allowed to specify only a (unique) prefix of the fingerprint.
591                                        </para>
592                                       
593                                </description>
594                               
595                        </bitlbee-command>
596               
597                </bitlbee-command>
598               
599        </bitlbee-command>
600
601        <bitlbee-command name="set">
602                <short-description>Miscellaneous settings</short-description>
603                <syntax>set</syntax>
604                <syntax>set &lt;variable&gt;</syntax>
605                <syntax>set &lt;variable&gt; &lt;value&gt;</syntax>
606                <syntax>set -del &lt;variable&gt;</syntax>
607
608                <description>
609
610                        <para>
611                                Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument. With <emphasis>-del</emphasis> you can reset a setting to its default value.
612                        </para>
613
614                        <para>
615                                To get more help information about a setting, try:
616                        </para>
617
618                </description>
619
620                <ircexample>
621                        <ircline nick="ctrlsoft">help set private</ircline>
622                </ircexample>
623
624        </bitlbee-command>
625
626        <bitlbee-command name="help">
627                <short-description>BitlBee help system</short-description>
628
629                <syntax>help [subject]</syntax>
630
631                <description>
632                        <para>
633                                This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
634                        </para>
635                </description>
636        </bitlbee-command>
637
638        <bitlbee-command name="save">
639                <short-description>Save your account data</short-description>
640                <syntax>save</syntax>
641
642                <description>
643                        <para>
644                                This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
645                        </para>
646                </description>
647        </bitlbee-command>
648
649        <bitlbee-setting name="account" type="string" scope="channel">
650
651                <description>
652                        <para>
653                                For control channels with <emphasis>fill_by</emphasis> set to <emphasis>account</emphasis>: Set this setting to the account id (numeric, or part of the username) of the account containing the contacts you want to see in this channel.
654                        </para>
655                </description>
656        </bitlbee-setting>
657
658        <bitlbee-setting name="allow_takeover" type="boolean" scope="global">
659                <default>true</default>
660
661                <description>
662                        <para>
663                                When you're already connected to a BitlBee server and you connect (and identify) again, BitlBee will offer to migrate your existing session to the new connection. If for whatever reason you don't want this, you can disable this setting.
664                        </para>
665                </description>
666        </bitlbee-setting>
667
668        <bitlbee-setting name="always_use_nicks" type="boolean" scope="channel">
669                <default>false</default>
670
671                <description>
672                        <para>
673                                Jabber groupchat specific. This setting ensures that the nicks defined by the other members of a groupchat are used, instead of the username part of their JID. This only applies to groupchats where their real JID is known (either "non-anonymous" ones, or "semi-anonymous" from the point of view of the channel moderators)
674                        </para>
675
676                        <para>
677                                Enabling this may have the side effect of changing the nick of existing contacts, either in your buddy list or in other groupchats. If a contact is in multiple groupchats with different nicks, enabling this setting for all those would result in multiple nick changes when joining, and the order of those changes may vary.
678                        </para>
679
680                        <para>
681                                Note that manual nick changes done through the <emphasis>rename</emphasis> command always take priority
682                        </para>
683                </description>
684        </bitlbee-setting>
685
686        <bitlbee-setting name="auto_connect" type="boolean" scope="account,global">
687                <default>true</default>
688
689                <description>
690                        <para>
691                                With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
692                        </para>
693                       
694                        <para>
695                                This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_connect</emphasis> setting is disabled!)
696                        </para>
697                </description>
698        </bitlbee-setting>
699
700        <bitlbee-setting name="auto_join" type="boolean" scope="channel">
701                <default>false</default>
702
703                <description>
704                        <para>
705                                With this option enabled, BitlBee will automatically join this channel when you log in.
706                        </para>
707                </description>
708        </bitlbee-setting>
709
710        <bitlbee-setting name="auto_reconnect" type="boolean" scope="account,global">
711                <default>true</default>
712
713                <description>
714                        <para>
715                                If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
716                        </para>
717
718                        <para>
719                                See also the <emphasis>auto_reconnect_delay</emphasis> setting.
720                        </para>
721
722                        <para>
723                                This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_reconnect</emphasis> setting is disabled!)
724                        </para>
725                </description>
726        </bitlbee-setting>
727
728        <bitlbee-setting name="auto_reconnect_delay" type="string" scope="global">
729                <default>5*3&lt;900</default>
730
731                <description>
732                        <para>
733                                Tell BitlBee after how many seconds it should attempt to bring a broken IM-connection back up.
734                        </para>
735
736                        <para>
737                                This can be one integer, for a constant delay. One can also set it to something like &quot;10*10&quot;, which means wait for ten seconds on the first reconnect, multiply it by ten on every failure. Once successfully connected, this delay is re-set to the initial value. With &lt; you can give a maximum delay.
738                        </para>
739
740                        <para>
741                                See also the <emphasis>auto_reconnect</emphasis> setting.
742                        </para>
743                </description>
744        </bitlbee-setting>
745
746        <bitlbee-setting name="auto_reply_timeout" type="integer" scope="account">
747                <default>10800</default>
748
749                <description>
750                        <para>
751                                For Twitter accounts: If you respond to Tweets IRC-style (like "nickname: reply"), this will automatically be converted to the usual Twitter format ("@screenname reply").
752                        </para>
753
754                        <para>
755                                By default, BitlBee will then also add a reference to that person's most recent Tweet, unless that message is older than the value of this setting in seconds.
756                        </para>
757
758                        <para>
759                                If you want to disable this feature, just set this to 0. Alternatively, if you want to write a message once that is <emphasis>not</emphasis> a reply, use the Twitter reply syntax (@screenname).
760                        </para>
761                </description>
762        </bitlbee-setting>
763
764        <bitlbee-setting name="away" type="string" scope="account,global">
765                <description>
766                        <para>
767                                To mark yourself as away, it is recommended to just use <emphasis>/away</emphasis>, like on normal IRC networks. If you want to mark yourself as away on only one IM network, you can use this per-account setting.
768                        </para>
769
770                        <para>
771                                You can set it to any value and BitlBee will try to map it to the most appropriate away state for every open IM connection, or set it as a free-form away message where possible.
772                        </para>
773
774                        <para>
775                                Any per-account away setting will override globally set away states. To un-set the setting, use <emphasis>set -del away</emphasis>.
776                        </para>
777                </description>
778        </bitlbee-setting>
779
780        <bitlbee-setting name="away_devoice" type="boolean" scope="global">
781                <default>true</default>
782
783                <description>
784                        <para>
785                                With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
786                        </para>
787                       
788                        <para>
789                                Replaced with the <emphasis>show_users</emphasis> setting. See <emphasis>help show_users</emphasis>.
790                        </para>
791                </description>
792        </bitlbee-setting>
793
794        <bitlbee-setting name="away_reply_timeout" type="integer" scope="global">
795                <default>3600</default>
796
797                <description>
798                        <para>
799                                Most IRC servers send a user's away message every time s/he gets a private message, to inform the sender that they may not get a response immediately. With this setting set to 0, BitlBee will also behave like this.
800                        </para>
801
802                        <para>
803                                Since not all IRC clients do an excellent job at suppressing these messages, this setting lets BitlBee do it instead. BitlBee will wait this many seconds (or until the away state/message changes) before re-informing you that the person's away.
804                        </para>
805                </description>
806        </bitlbee-setting>
807
808        <bitlbee-setting name="base_url" type="string" scope="account">
809                <default>http://api.twitter.com/1</default>
810
811                <description>
812                        <para>
813                                There are more services that understand the Twitter API than just Twitter.com. BitlBee can connect to all Twitter API implementations.
814                        </para>
815
816                        <para>
817                                For example, set this setting to <emphasis>http://identi.ca/api</emphasis> to use Identi.ca.
818                        </para>
819
820                        <para>
821                                Keep two things in mind: When not using Twitter, you <emphasis>must</emphasis> also disable the <emphasis>oauth</emphasis> setting as it currently only works with Twitter. If you're still having issues, make sure there is <emphasis>no</emphasis> slash at the end of the URL you enter here.
822                        </para>
823                </description>
824        </bitlbee-setting>
825
826        <bitlbee-setting name="carbons" type="boolean" scope="account">
827                <default>true</default>
828
829                <description>
830                        <para>
831                                Jabber specific. "Message carbons" (XEP-0280) is a server feature to get copies of outgoing messages sent from other clients connected to the same account. It's not widely supported by most public XMPP servers (easier if you host your own), but this will probably change in the next few years.
832                        </para>
833                        <para>
834                                This defaults to true, which will enable it if the server supports it, or fail silently if it's not. This setting only exists to allow disabling the feature if anyone considers it undesirable.
835                        </para>
836                        <para>
837                                See also the <emphasis>self_messages</emphasis> setting.
838                        </para>
839                </description>
840        </bitlbee-setting>
841
842        <bitlbee-setting name="charset" type="string" scope="global">
843                <default>utf-8</default>
844                <possible-values>you can get a list of all possible values by doing 'iconv -l' in a shell</possible-values>
845
846                <description>
847                        <para>
848                                This setting tells BitlBee what your IRC client sends and expects. It should be equal to the charset setting of your IRC client if you want to be able to send and receive non-ASCII text properly.
849                        </para>
850
851                        <para>
852                                Most systems use UTF-8 these days. On older systems, an iso8859 charset may work better. For example, iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://www.unicodecharacter.com/charsets/iso8859.html
853                        </para>
854                </description>
855
856        </bitlbee-setting>
857
858        <bitlbee-setting name="color_encrypted" type="boolean" scope="global">
859                <default>true</default>
860
861                <description>
862                        <para>
863                                If set to true, BitlBee will color incoming encrypted messages according to their fingerprint trust level: untrusted=red, trusted=green.
864                        </para>
865                </description>
866        </bitlbee-setting>
867
868        <bitlbee-setting name="chat_type" type="string" scope="channel">
869                <default>groupchat</default>
870                <possible-values>groupchat, room</possible-values>
871
872                <description>
873                        <para>
874                                There are two kinds of chat channels: simple groupchats (basically normal IM chats with more than two participants) and names chatrooms, more similar to IRC channels.
875                        </para>
876                       
877                        <para>
878                                BitlBee supports both types. With this setting set to <emphasis>groupchat</emphasis> (the default), you can just invite people into the room and start talking.
879                        </para>
880                       
881                        <para>
882                                For setting up named chatrooms, it's currently easier to just use the <emphasis>chat add</emphasis> command.
883                        </para>
884                </description>
885        </bitlbee-setting>
886
887        <bitlbee-setting name="commands" type="boolean" scope="account">
888                <default>true</default>
889                <possible-values>true, false, strict</possible-values>
890
891                <description>
892                        <para>
893                                With this setting enabled, you can use some commands in your Twitter channel/query. The commands are simple and not documented in too much detail:
894                        </para>
895
896                        <variablelist>
897                                <varlistentry><term>undo #[&lt;id&gt;]</term><listitem><para>Delete your last Tweet (or one with the given ID)</para></listitem></varlistentry>
898                                <varlistentry><term>rt &lt;screenname|#id&gt;</term><listitem><para>Retweet someone's last Tweet (or one with the given ID)</para></listitem></varlistentry>
899                                <varlistentry><term>reply &lt;screenname|#id&gt;</term><listitem><para>Reply to a Tweet (with a reply-to reference)</para></listitem></varlistentry>
900                                <varlistentry><term>rawreply &lt;screenname|#id&gt;</term><listitem><para>Reply to a Tweet (with no reply-to reference)</para></listitem></varlistentry>
901                                <varlistentry><term>report &lt;screenname|#id&gt;</term><listitem><para>Report the given user (or the user who posted the tweet with the given ID) for sending spam. This will also block them.</para></listitem></varlistentry>
902                                <varlistentry><term>follow &lt;screenname&gt;</term><listitem><para>Start following a person</para></listitem></varlistentry>
903                                <varlistentry><term>unfollow &lt;screenname&gt;</term><listitem><para>Stop following a person</para></listitem></varlistentry>
904                                <varlistentry><term>favourite &lt;screenname|#id&gt;</term><listitem><para>Favo<emphasis>u</emphasis>rite the given user's most recent tweet, or the given tweet ID.</para></listitem></varlistentry>
905                                <varlistentry><term>post &lt;message&gt;</term><listitem><para>Post a tweet</para></listitem></varlistentry>
906                                <varlistentry><term>url &lt;screenname|#id&gt;</term><listitem><para>Show URL for a tweet to open it in a browser (and see context)</para></listitem></varlistentry>
907                        </variablelist>
908
909                        <para>
910                                Anything that doesn't look like a command will be treated as a tweet. Watch out for typos, or to avoid this behaviour, you can set this setting to <emphasis>strict</emphasis>, which causes the <emphasis>post</emphasis> command to become mandatory for posting a tweet.
911                        </para>
912                </description>
913        </bitlbee-setting>
914
915        <bitlbee-setting name="debug" type="boolean" scope="global">
916                <default>false</default>
917
918                <description>
919                        <para>
920                                Some debugging messages can be logged if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
921                        </para>
922                       
923                        <para>
924                                This feature is not currently used for anything so don't expect this to generate any output.
925                        </para>
926                </description>
927        </bitlbee-setting>
928
929        <bitlbee-setting name="default_target" type="string" scope="global">
930                <default>root</default>
931                <possible-values>root, last</possible-values>
932
933                <description>
934                        <para>
935                                With this value set to <emphasis>root</emphasis>, lines written in a control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in that control channel, set this to <emphasis>last</emphasis>.
936                        </para>
937                </description>
938        </bitlbee-setting>
939
940        <bitlbee-setting name="display_name" type="string" scope="account">
941                <description>
942                        <para>
943                                Currently only available for MSN connections, and for jabber groupchats.
944                        </para>
945                        <para>
946                                For MSN: This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line.
947                        </para>
948                        <para>
949                                For jabber groupchats: this sets the default value of 'nick' for newly created groupchats. There is no way to set an account-wide nick like MSN.
950                        </para>
951                </description>
952        </bitlbee-setting>
953
954        <bitlbee-setting name="display_namechanges" type="boolean" scope="global">
955                <default>false</default>
956
957                <description>
958                        <para>
959                                With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name".
960                        </para>
961                </description>
962        </bitlbee-setting>
963
964        <bitlbee-setting name="display_timestamps" type="boolean" scope="global">
965                <default>true</default>
966
967                <description>
968                        <para>
969                                When incoming messages are old (i.e. offline messages and channel backlogs), BitlBee will prepend them with a timestamp. If you find them ugly or useless, you can use this setting to hide them.
970                        </para>
971                </description>
972        </bitlbee-setting>
973
974        <bitlbee-setting name="fill_by" type="string" scope="channel">
975                <default>all</default>
976                <possible-values>all, group, account, protocol</possible-values>
977
978                <description>
979                        <para>
980                                For control channels only: This setting determines which contacts the channel gets populated with.
981                        </para>
982
983                        <para>
984                                By default, control channels will contain all your contacts. You instead select contacts by buddy group, IM account or IM protocol.
985                        </para>
986                       
987                        <para>
988                                Change this setting and the corresponding <emphasis>account</emphasis>/<emphasis>group</emphasis>/<emphasis>protocol</emphasis> setting to set up this selection.
989                        </para>
990                       
991                        <para>
992                                With a ! prefix an inverted channel can be created, for example with this setting set to <emphasis>!group</emphasis> you can create a channel with all users <emphasis>not</emphasis> in that group.
993                        </para>
994                       
995                        <para>
996                                Note that, when creating a new channel, BitlBee will try to preconfigure the channel for you, based on the channel name. See <emphasis>help channels</emphasis>.
997                        </para>
998                </description>
999        </bitlbee-setting>
1000
1001        <bitlbee-setting name="group" type="string" scope="channel">
1002
1003                <description>
1004                        <para>
1005                                For control channels with <emphasis>fill_by</emphasis> set to <emphasis>group</emphasis>: Set this setting to the name of the group containing the contacts you want to see in this channel.
1006                        </para>
1007                </description>
1008        </bitlbee-setting>
1009
1010        <bitlbee-setting name="handle_unknown" type="string" scope="global">
1011                <default>add_channel</default>
1012                <possible-values>root, add, add_private, add_channel, ignore</possible-values>
1013
1014                <description>
1015                        <para>
1016                                By default, messages from people who aren't in your contact list are shown in a control channel instead of as a private message.
1017                        </para>
1018
1019                        <para>
1020                                If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
1021                        </para>
1022
1023                        <note>
1024                                <para>
1025                                        Although these users will appear in your control channel, they aren't added to your real contact list. When you restart BitlBee, these auto-added users will be gone. If you want to keep someone in your list, you have to fixate the add using the <emphasis>add</emphasis> command.
1026                                </para>
1027                        </note>
1028                </description>
1029
1030        </bitlbee-setting>
1031
1032        <bitlbee-setting name="ignore_auth_requests" type="boolean" scope="account">
1033                <default>false</default>
1034
1035                <description>
1036                        <para>
1037                                Only supported by OSCAR so far, you can use this setting to ignore ICQ authorization requests, which are hardly used for legitimate (i.e. non-spam) reasons anymore.
1038                        </para>
1039                </description>
1040
1041        </bitlbee-setting>
1042
1043        <bitlbee-setting name="local_display_name" type="boolean" scope="account">
1044                <default>false</default>
1045
1046                <description>
1047                        <para>
1048                                Mostly meant to work around a bug in MSN servers (forgetting the display name set by the user), this setting tells BitlBee to store your display name locally and set this name on the MSN servers when connecting.
1049                        </para>
1050                </description>
1051
1052        </bitlbee-setting>
1053
1054        <bitlbee-setting name="mail_notifications" type="boolean" scope="account">
1055                <default>false</default>
1056
1057                <description>
1058                        <para>
1059                                Some protocols can notify via IM about new e-mail. If you want these notifications, you can enable this setting.
1060                        </para>
1061                </description>
1062
1063        </bitlbee-setting>
1064
1065        <bitlbee-setting name="mail_notifications_handle" type="string" scope="account">
1066                <default>empty</default>
1067
1068                <description>
1069                        <para>
1070                                This setting is available for protocols with e-mail notification functionality. If set to empty all e-mail notifications will go to control channel, if set to some string - this will be the name of a contact who will PRIVMSG you on every new notification.
1071                        </para>
1072                </description>
1073
1074        </bitlbee-setting>
1075
1076        <bitlbee-setting name="message_length" type="integer" scope="account">
1077                <default>140</default>
1078
1079                <description>
1080                        <para>
1081                                Since Twitter rejects messages longer than 140 characters, BitlBee can count message length and emit a warning instead of waiting for Twitter to reject it.
1082                        </para>
1083
1084                        <para>
1085                                You can change this limit here but this won't disable length checks on Twitter's side. You can also set it to 0 to disable the check in case you believe BitlBee doesn't count the characters correctly.
1086                        </para>
1087                </description>
1088
1089        </bitlbee-setting>
1090
1091        <bitlbee-setting name="stream" type="boolean" scope="account">
1092                <default>true</default>
1093
1094                <description>
1095                        <para>
1096                                For Twitter accounts, this setting enables use of the Streaming API. This automatically gives you incoming DMs as well.
1097                        </para>
1098                       
1099                        <para>
1100                                For other Twitter-like services, this setting is not supported.
1101                        </para>
1102                </description>
1103
1104        </bitlbee-setting>
1105       
1106        <bitlbee-setting name="target_url_length" type="integer" scope="account">
1107                <default>20</default>
1108
1109                <description>
1110                        <para>
1111                                Twitter replaces every URL with fixed-length t.co URLs. BitlBee is able to take t.co urls into account when calculating <emphasis>message_length</emphasis> replacing the actual URL length with target_url_length. Setting target_url_length to 0 disables this feature.
1112                        </para>
1113
1114                        <para>
1115                                This setting is disabled for identica accounts by default and will not affect anything other than message safety checks (i.e. Twitter will still replace your URLs with t.co links, even if that makes them longer).
1116                        </para>
1117                </description>
1118
1119        </bitlbee-setting>
1120
1121        <bitlbee-setting name="mode" type="string" scope="account">
1122                <possible-values>one, many, chat</possible-values>
1123                <default>chat</default>
1124
1125                <description>
1126                        <para>
1127                                By default, BitlBee will create a separate channel (called #twitter_yourusername) for all your Twitter contacts/messages.
1128                        </para>
1129
1130                        <para>
1131                                If you don't want an extra channel, you can set this setting to "one" (everything will come from one nick, twitter_yourusername), or to "many" (individual nicks for everyone).
1132                        </para>
1133                       
1134                        <para>
1135                                With modes "chat" and "many", you can send direct messages by /msg'ing your contacts directly. Incoming DMs are only fetched if the "stream" setting is on (default).
1136                        </para>
1137                       
1138                        <para>
1139                                With modes "many" and "one", you can post tweets by /msg'ing the twitter_yourusername contact. In mode "chat", messages posted in the Twitter channel will also be posted as tweets.
1140                        </para>
1141                </description>
1142
1143        </bitlbee-setting>
1144
1145        <bitlbee-setting name="mobile_is_away" type="boolean" scope="global">
1146                <default>false</default>
1147
1148                <description>
1149                        <para>
1150                                Most IM networks have a mobile version of their client. People who use these may not be paying that much attention to messages coming in. By enabling this setting, people using mobile clients will always be shown as away.
1151                        </para>
1152                </description>
1153
1154        </bitlbee-setting>
1155
1156        <bitlbee-setting name="nick" type="string" scope="chat">
1157                <description>
1158                        <para>
1159                                You can use this option to set your nickname in a chatroom. You won't see this nickname yourself, but other people in the room will. By default, BitlBee will use your username as the chatroom nickname.
1160                        </para>
1161                </description>
1162        </bitlbee-setting>
1163
1164        <bitlbee-setting name="nick_format" type="string" scope="account,global">
1165                <default>%-@nick</default>
1166
1167                <description>
1168                        <para>
1169                                By default, BitlBee tries to derive sensible nicknames for all your contacts from their IM handles. In some cases, IM modules (ICQ for example) will provide a nickname suggestion, which will then be used instead. This setting lets you change this behaviour.
1170                        </para>
1171
1172                        <para>
1173                                Whenever this setting is set for an account, it will be used for all its contacts. If it's not set, the global value will be used.
1174                        </para>
1175
1176                        <para>
1177                                It's easier to describe this setting using a few examples:
1178                        </para>
1179
1180                        <para>
1181                                FB-%full_name will make all nicknames start with "FB-", followed by the person's full name. For example you can set this format for your Facebook account so all Facebook contacts are clearly marked.
1182                        </para>
1183
1184                        <para>
1185                                [%group]%-@nick will make all nicknames start with the group the contact is in between square brackets, followed by the nickname suggestions from the IM module if available, or otherwise the handle. Because of the "-@" part, everything from the first @ will be stripped.
1186                        </para>
1187
1188                        <para>
1189                                See <emphasis>help nick_format</emphasis> for more information.
1190                        </para>
1191                </description>
1192        </bitlbee-setting>
1193
1194        <bitlbee-setting name="nick_source" type="string" scope="account">
1195                <default>handle</default>
1196                <possible-values>handle, full_name, first_name</possible-values>
1197
1198                <description>
1199                        <para>
1200                                By default, BitlBee generates a nickname for every contact by taking its handle and chopping off everything after the @. In some cases, this gives very inconvenient nicknames. Some servers use internal identifiers, which are often just numbers.
1201                        </para>
1202
1203                        <para>
1204                                With this setting set to <emphasis>full_name</emphasis>, the person's full name is used to generate a nickname. Or if you don't like long nicknames, set this setting to <emphasis>first_name</emphasis> instead and only the first word will be used. Note that the full name can be full of non-ASCII characters which will be stripped off.
1205                        </para>
1206                </description>
1207        </bitlbee-setting>
1208
1209        <bitlbee-setting name="nick_lowercase" type="boolean" scope="global">
1210                <default>true</default>
1211
1212                <description>
1213                        <para>
1214                                If enabled, all nicknames are turned into lower case.
1215                        </para>
1216
1217                        <para>
1218                                See also the <emphasis>nick_underscores</emphasis> setting. This setting was previously known as <emphasis>lcnicks</emphasis>.
1219                        </para>
1220                </description>
1221
1222        </bitlbee-setting>
1223
1224        <bitlbee-setting name="nick_underscores" type="boolean" scope="global">
1225                <default>true</default>
1226
1227                <description>
1228                        <para>
1229                                If enabled, spaces in nicknames are turned into underscores instead of being stripped.
1230                        </para>
1231
1232                        <para>
1233                                See also the <emphasis>nick_lowercase</emphasis> setting.
1234                        </para>
1235                </description>
1236
1237        </bitlbee-setting>
1238
1239        <bitlbee-setting name="oauth" type="boolean" scope="account">
1240                <default>true</default>
1241
1242                <description>
1243                        <para>
1244                                This enables OAuth authentication for an IM account; right now the Twitter (working for Twitter only) and Jabber (for Google Talk only) module support it.
1245                        </para>
1246
1247                        <para>
1248                                With OAuth enabled, you shouldn't tell BitlBee your account password. Just add your account with a bogus password and type <emphasis>account on</emphasis>. BitlBee will then give you a URL to authenticate with the service. If this succeeds, you will get a PIN code which you can give back to BitlBee to finish the process.
1249                        </para>
1250
1251                        <para>
1252                                The resulting access token will be saved permanently, so you have to do this only once. If for any reason you want to/have to reauthenticate, you can use <emphasis>account set</emphasis> to reset the account password to something random.
1253                        </para>
1254                </description>
1255
1256        </bitlbee-setting>
1257
1258        <bitlbee-setting name="anonymous" type="boolean" scope="account">
1259                <default>false</default>
1260
1261                <description>
1262                        <para>
1263                                This enables SASL ANONYMOUS login for jabber accounts, as specified by XEP-0175.
1264                        </para>
1265
1266                        <para>
1267                                With this setting enabled, if the server allows this method, a password isn't required and the username part of the JID is ignored (you can use anonymous@jabber.example.com). Servers will usually assign you a random numeric username instead.
1268                        </para>
1269                </description>
1270
1271        </bitlbee-setting>
1272
1273        <bitlbee-setting name="ops" type="string" scope="global">
1274                <default>both</default>
1275                <possible-values>both, root, user, none</possible-values>
1276
1277                <description>
1278                        <para>
1279                                Some people prefer themself and root to have operator status in &amp;bitlbee, other people don't. You can change these states using this setting.
1280                        </para>
1281
1282                        <para>
1283                                The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
1284                        </para>
1285                </description>
1286        </bitlbee-setting>
1287
1288        <bitlbee-setting name="otr_policy" type="string" scope="global">
1289                <default>opportunistic</default>
1290                <possible-values>never, opportunistic, manual, always</possible-values>
1291
1292                <description>
1293                        <para>
1294                                This setting controls the policy for establishing Off-the-Record connections.
1295                        </para>
1296                        <para>
1297                                A value of "never" effectively disables the OTR subsystem. In "opportunistic" mode, a magic whitespace pattern will be appended to the first message sent to any user. If the peer is also running opportunistic OTR, an encrypted connection will be set up automatically. On "manual", on the other hand, OTR connections must be established explicitly using <emphasis>otr connect</emphasis>. Finally, the setting "always" enforces encrypted communication by causing BitlBee to refuse to send any cleartext messages at all.
1298                        </para>
1299                </description>
1300        </bitlbee-setting>
1301
1302        <bitlbee-setting name="password" type="string" scope="account,global">
1303                <description>
1304                        <para>
1305                                Use this global setting to change your "NickServ" password.
1306                        </para>
1307                       
1308                        <para>
1309                                This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service.
1310                        </para>
1311                       
1312                        <para>
1313                                Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text.
1314                        </para>
1315                </description>
1316        </bitlbee-setting>
1317
1318        <bitlbee-setting name="paste_buffer" type="boolean" scope="global">
1319                <default>false</default>
1320
1321                <description>
1322                        <para>
1323                                By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
1324                        </para>
1325
1326                        <para>
1327                                Using the <emphasis>paste_buffer_delay</emphasis> setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
1328                        </para>
1329
1330                        <para>
1331                                Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
1332                        </para>
1333                </description>
1334        </bitlbee-setting>
1335
1336        <bitlbee-setting name="paste_buffer_delay" type="integer" scope="global">
1337                <default>200</default>
1338
1339                <description>
1340
1341                        <para>
1342                                Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds.
1343                        </para>
1344
1345                        <para>
1346                                See also the <emphasis>paste_buffer</emphasis> setting.
1347                        </para>
1348                </description>
1349        </bitlbee-setting>
1350       
1351        <bitlbee-setting name="port" type="integer" scope="account">
1352                <description>
1353                        <para>
1354                                Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections.
1355                        </para>
1356                </description>
1357        </bitlbee-setting>
1358
1359        <bitlbee-setting name="priority" type="integer" scope="account">
1360                <default>0</default>
1361
1362                <description>
1363                        <para>
1364                                Can be set for Jabber connections. When connecting to one account from multiple places, this priority value will help the server to determine where to deliver incoming messages (that aren't addressed to a specific resource already).
1365                        </para>
1366
1367                        <para>
1368                                According to RFC 3921 servers will always deliver messages to the server with the highest priority value. Mmessages will not be delivered to resources with a negative priority setting (and should be saved as an off-line message if all available resources have a negative priority value).
1369                        </para>
1370                </description>
1371        </bitlbee-setting>
1372
1373        <bitlbee-setting name="private" type="boolean" scope="global">
1374                <default>true</default>
1375
1376                <description>
1377                        <para>
1378                                If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in a control channel.
1379                        </para>
1380
1381                        <para>
1382                                This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
1383                        </para>
1384                </description>
1385        </bitlbee-setting>
1386
1387        <bitlbee-setting name="protocol" type="string" scope="channel">
1388
1389                <description>
1390                        <para>
1391                                For control channels with <emphasis>fill_by</emphasis> set to <emphasis>protocol</emphasis>: Set this setting to the name of the IM protocol of all contacts you want to see in this channel.
1392                        </para>
1393                </description>
1394        </bitlbee-setting>
1395
1396        <bitlbee-setting name="proxy" type="string" scope="account">
1397                <default>&lt;local&gt;&lt;auto&gt;</default>
1398
1399                <description>
1400                        <para>
1401                                A list of <emphasis>file transfer proxies</emphasis> for jabber. This isn't the connection proxy. Sorry, look in bitlbee.conf for those.
1402                        </para>
1403
1404                        <para>
1405                                It's a semicolon-separated list of items that can be either <emphasis>JID,HOST,PORT</emphasis> or two special values, <emphasis>&lt;local&gt;</emphasis> (to try a direct connection first) and <emphasis>&lt;auto&gt;</emphasis> (to try to discover a proxy). For example, "&lt;local&gt;;proxy.somewhere.org,123.123.123.123,7777".
1406                        </para>
1407                        <para>
1408                                The address should point to a SOCKS5 bytestreams server, usually provided by jabber servers. This is only used for sending files. Note that the host address might not match what DNS tells you, and the port isn't always the same.
1409                        </para>
1410                        <para>
1411                                The correct way to get a socks proxy host/port is a mystery, and the file transfer might fail anyway. Maybe just try using dropbox instead.
1412                        </para>
1413                </description>
1414        </bitlbee-setting>
1415
1416        <bitlbee-setting name="query_order" type="string" scope="global">
1417                <default>lifo</default>
1418                <possible-values>lifo, fifo</possible-values>
1419
1420                <description>
1421                        <para>
1422                                This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to <emphasis>lifo</emphasis>, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to <emphasis>fifo</emphasis>, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
1423                        </para>
1424
1425                        <para>
1426                                Although the <emphasis>fifo</emphasis> setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
1427                        </para>
1428                </description>
1429        </bitlbee-setting>
1430
1431        <bitlbee-setting name="resource" type="string" scope="account">
1432                <default>BitlBee</default>
1433
1434                <description>
1435                        <para>
1436                                Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string.
1437                        </para>
1438                </description>
1439        </bitlbee-setting>
1440
1441        <bitlbee-setting name="resource_select" type="string" scope="account">
1442                <default>activity</default>
1443                <possible-values>priority, activity</possible-values>
1444
1445                <description>
1446                        <para>
1447                                Because the IRC interface makes it pretty hard to specify the resource to talk to (when a buddy is online through different resources), this setting was added.
1448                        </para>
1449
1450                        <para>
1451                                Normally it's set to <emphasis>priority</emphasis> which means messages will always be delivered to the buddy's resource with the highest priority. If the setting is set to <emphasis>activity</emphasis>, messages will be delivered to the resource that was last used to send you a message (or the resource that most recently connected).
1452                        </para>
1453                </description>
1454        </bitlbee-setting>
1455
1456        <bitlbee-setting name="root_nick" type="string" scope="global">
1457                <default>root</default>
1458
1459                <description>
1460                        <para>
1461                                Normally the "bot" that takes all your BitlBee commands is called "root". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
1462                        </para>
1463                </description>
1464        </bitlbee-setting>
1465
1466        <bitlbee-setting name="save_on_quit" type="boolean" scope="global">
1467                <default>true</default>
1468
1469                <description>
1470                        <para>
1471                                If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
1472                        </para>
1473                </description>
1474        </bitlbee-setting>
1475
1476        <bitlbee-setting name="self_messages" type="string" scope="global">
1477                <default>true</default>
1478                <possible-values>true, false, prefix, prefix_notice</possible-values>
1479
1480                <description>
1481                        <para>
1482                                Change this setting to customize how (or whether) to show self-messages, which are messages sent by yourself from other locations (for example, mobile clients), for IM protocols that support it.
1483                        </para>
1484
1485                        <para>
1486                                When this is set to "true", it will send those messages in the "standard" way, which is a PRIVMSG with source and target fields swapped.
1487                        </para>
1488                       
1489                        <para>
1490                                Since this isn't very well supported by some clients (the messages might appear in the wrong window), you can set it to "prefix" to show them as a normal message prefixed with "-> ", or use "prefix_notice" which is the same thing but with a NOTICE instead.
1491                        </para>
1492
1493                        <para>
1494                                You can also set it to "false" to disable these messages completely.
1495                        </para>
1496
1497                        <para>
1498                                This setting only applies to private messages. Self messages in groupchats are always shown, since they haven't caused issues in any clients so far.
1499                        </para>
1500
1501                        <para>
1502                                More information: <emphasis>https://wiki.bitlbee.org/SelfMessages</emphasis>
1503                        </para>
1504                </description>
1505        </bitlbee-setting>
1506
1507        <bitlbee-setting name="server" type="string" scope="account">
1508                <description>
1509                        <para>
1510                                Can be set for Jabber- and OSCAR-connections. For Jabber, you might have to set this if the servername isn't equal to the part after the @ in the Jabber handle. For OSCAR this shouldn't be necessary anymore in recent BitlBee versions.
1511                        </para>
1512                </description>
1513        </bitlbee-setting>
1514
1515        <bitlbee-setting name="show_ids" type="boolean" scope="account">
1516                <default>true</default>
1517
1518                <description>
1519                        <para>
1520                                Enable this setting on a Twitter account to have BitlBee include a two-digit "id" in front of every message. This id can then be used for replies and retweets.
1521                        </para>
1522                </description>
1523        </bitlbee-setting>
1524
1525        <bitlbee-setting name="show_offline" type="boolean" scope="global">
1526                <default>false</default>
1527
1528                <description>
1529                        <para>
1530                                If enabled causes BitlBee to also show offline users in Channel. Online-users will get op, away-users voice and offline users none of both. This option takes effect as soon as you reconnect.
1531                        </para>
1532                       
1533                        <para>
1534                                Replaced with the <emphasis>show_users</emphasis> setting. See <emphasis>help show_users</emphasis>.
1535                        </para>
1536                </description>
1537        </bitlbee-setting>
1538
1539        <bitlbee-setting name="show_users" type="string" scope="channel">
1540                <default>online+,special%,away</default>
1541
1542                <description>
1543                        <para>
1544                                Comma-separated list of statuses of users you want in the channel,
1545                                and any modes they should have. The following statuses are currently
1546                                recognised: <emphasis>online</emphasis> (i.e. available, not
1547                                away), <emphasis>special</emphasis> (specific to the protocol),
1548                                <emphasis>away</emphasis>, and <emphasis>offline</emphasis>.
1549                        </para>
1550                       
1551                        <para>
1552                                If a status is followed by a valid channel mode character
1553                                (@, % or +), it will be given to users with that status.
1554                                For example, <emphasis>online@,special%,away+,offline</emphasis> 
1555                                will show all users in the channel. Online people will
1556                                have +o, people who are online but away will have +v,
1557                                and others will have no special modes.
1558                        </para>
1559                </description>
1560        </bitlbee-setting>
1561
1562        <bitlbee-setting name="simulate_netsplit" type="boolean" scope="global">
1563                <default>true</default>
1564
1565                <description>
1566                        <para>
1567                                Some IRC clients parse quit messages sent by the IRC server to see if someone really left or just disappeared because of a netsplit. By default, BitlBee tries to simulate netsplit-like quit messages to keep the control channels window clean. If you don't like this (or if your IRC client doesn't support this) you can disable this setting.
1568                        </para>
1569                </description>
1570        </bitlbee-setting>
1571
1572        <bitlbee-setting name="ssl" type="boolean" scope="account">
1573                <default>false</default>
1574
1575                <description>
1576                        <para>
1577                                Currently only available for Jabber connections. Set this to true if you want to connect to the server on an SSL-enabled port (usually 5223).
1578                        </para>
1579
1580                        <para>
1581                                Please note that this method of establishing a secure connection to the server has long been deprecated. You are encouraged to look at the <emphasis>tls</emphasis> setting instead.
1582                        </para>
1583                </description>
1584        </bitlbee-setting>
1585
1586        <bitlbee-setting name="status" type="string" scope="account,global">
1587                <description>
1588                        <para>
1589                                Most IM protocols support status messages, similar to away messages. They can be used to indicate things like your location or activity, without showing up as away/busy.
1590                        </para>
1591
1592                        <para>
1593                                This setting can be used to set such a message. It will be available as a per-account setting for protocols that support it, and also as a global setting (which will then automatically be used for all protocols that support it).
1594                        </para>
1595
1596                        <para>
1597                                Away states set using <emphasis>/away</emphasis> or the <emphasis>away</emphasis> setting will override this setting. To clear the setting, use <emphasis>set -del status</emphasis>.
1598                        </para>
1599                </description>
1600        </bitlbee-setting>
1601
1602        <bitlbee-setting name="strip_html" type="boolean" scope="global">
1603                <default>true</default>
1604
1605                <description>
1606                        <para>
1607                                Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML.
1608                        </para>
1609                        <para>
1610                                If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to <emphasis>always</emphasis>, but this might sometimes accidentally strip non-HTML things too.
1611                        </para>
1612                </description>
1613        </bitlbee-setting>
1614
1615        <bitlbee-setting name="strip_newlines" type="boolean" scope="account">
1616                <default>false</default>
1617
1618                <description>
1619                        <para>
1620                                Turn on this flag to prevent tweets from spanning over multiple lines.
1621                        </para>
1622                </description>
1623        </bitlbee-setting>
1624
1625        <bitlbee-setting name="show_old_mentions" type="integer" scope="account">
1626                <default>20</default>
1627
1628                <description>
1629                        <para>
1630                                This setting specifies the number of old mentions to fetch on connection. Must be less or equal to 200. Setting it to 0 disables this feature.
1631                        </para>
1632                </description>
1633        </bitlbee-setting>
1634
1635        <bitlbee-setting name="switchboard_keepalives" type="boolean" scope="account">
1636                <default>false</default>
1637
1638                <description>
1639                        <para>
1640                                Turn on this flag if you have difficulties talking to offline/invisible contacts.
1641                        </para>
1642                       
1643                        <para>
1644                                With this setting enabled, BitlBee will send keepalives to MSN switchboards with offline/invisible contacts every twenty seconds. This should keep the server and client on the other side from shutting it down.
1645                        </para>
1646                       
1647                        <para>
1648                                This is useful because BitlBee doesn't support MSN offline messages yet and the MSN servers won't let the user reopen switchboards to offline users. Once offline messaging is supported, this flag might be removed.
1649                        </para>
1650                </description>
1651        </bitlbee-setting>
1652
1653        <bitlbee-setting name="tag" type="string" scope="account">
1654                <description>
1655                        <para>
1656                                For every account you have, you can set a tag you can use to uniquely identify that account. This tag can be used instead of the account number (or protocol name, or part of the screenname) when using commands like <emphasis>account</emphasis>, <emphasis>add</emphasis>, etc. You can't have two accounts with one and the same account tag.
1657                        </para>
1658
1659                        <para>
1660                                By default, it will be set to the name of the IM protocol. Once you add a second account on an IM network, a numeric suffix will be added, starting with 2.
1661                        </para>
1662                </description>
1663        </bitlbee-setting>
1664
1665        <bitlbee-setting name="timezone" type="string" scope="global">
1666                <default>local</default>
1667                <possible-values>local, utc, gmt, timezone-spec</possible-values>
1668
1669                <description>
1670                        <para>
1671                                If message timestamps are available for offline messages or chatroom backlogs, BitlBee will display them as part of the message. By default it will use the local timezone. If you're not in the same timezone as the BitlBee server, you can adjust the timestamps using this setting.
1672                        </para>
1673
1674                        <para>
1675                                Values local/utc/gmt should be self-explanatory. timezone-spec is a time offset in hours:minutes, for example: -8 for Pacific Standard Time, +2 for Central European Summer Time, +5:30 for Indian Standard Time.
1676                        </para>
1677                </description>
1678        </bitlbee-setting>
1679
1680        <bitlbee-setting name="tls" type="boolean" scope="account">
1681                <default>true</default>
1682
1683                <description>
1684                        <para>
1685                                By default (with this setting enabled), BitlBee will require Jabber servers to offer encryption via StartTLS and refuse to connect if they don't.
1686                        </para>
1687
1688                        <para>
1689                                If you set this to "try", BitlBee will use StartTLS only if it's offered. With the setting disabled, StartTLS support will be ignored and avoided entirely.
1690                        </para>
1691                </description>
1692        </bitlbee-setting>
1693
1694        <bitlbee-setting name="tls_verify" type="boolean" scope="account">
1695                <default>true</default>
1696
1697                <description>
1698                        <para>
1699                                Currently only available for Jabber connections in combination with the <emphasis>tls</emphasis> setting. Set this to <emphasis>true</emphasis> if you want BitlBee to strictly verify the server's certificate against a list of trusted certificate authorities.
1700                        </para>
1701
1702                        <para>
1703                                The hostname used in the certificate verification is the value of the <emphasis>server</emphasis> setting if the latter is nonempty and the domain of the username else. If you get a hostname related error when connecting to Google Talk with a username from the gmail.com or googlemail.com domain, please try to empty the <emphasis>server</emphasis> setting.
1704                        </para>
1705
1706                        <para>
1707                                Please note that no certificate verification is performed when the <emphasis>ssl</emphasis> setting is used, or when the <emphasis>CAfile</emphasis> setting in <emphasis>bitlbee.conf</emphasis> is not set.
1708                        </para>
1709                </description>
1710        </bitlbee-setting>
1711
1712        <bitlbee-setting name="to_char" type="string" scope="global">
1713                <default>": "</default>
1714
1715                <description>
1716                        <para>
1717                                It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using <emphasis>set to_char</emphasis>.
1718                        </para>
1719
1720                        <para>
1721                                Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
1722                        </para>
1723                </description>
1724        </bitlbee-setting>
1725
1726        <bitlbee-setting name="translate_to_nicks" type="boolean" scope="channel">
1727                <default>true</default>
1728
1729                <description>
1730                        <para>
1731                                IRC's nickname namespace is quite limited compared to most IM protocols. Not any non-ASCII characters are allowed, in fact nicknames have to be mostly alpha-numeric. Also, BitlBee has to add underscores sometimes to avoid nickname collisions.
1732                        </para>
1733
1734                        <para>
1735                                While normally the BitlBee user is the only one seeing these names, they may be exposed to other chatroom participants for example when addressing someone in the channel (with or without tab completion). By default BitlBee will translate these stripped nicknames back to the original nick. If you don't want this, disable this setting.
1736                        </para>
1737                </description>
1738        </bitlbee-setting>
1739
1740        <bitlbee-setting name="type" type="string" scope="channel">
1741                <default>control</default>
1742                <possible-values>control, chat</possible-values>
1743
1744                <description>
1745                        <para>
1746                                BitlBee supports two kinds of channels: control channels (usually with a name starting with a &amp;) and chatroom channels (name usually starts with a #).
1747                        </para>
1748
1749                        <para>
1750                                See <emphasis>help channels</emphasis> for a full description of channel types in BitlBee.
1751                        </para>
1752                </description>
1753        </bitlbee-setting>
1754
1755        <bitlbee-setting name="typing_notice" type="boolean" scope="global">
1756                <default>false</default>
1757
1758                <description>
1759                        <para>
1760                                Sends you a /notice when a user starts typing a message (if supported by the IM protocol and the user's client). To use this, you most likely want to use a script in your IRC client to show this information in a more sensible way.
1761                        </para>
1762                </description>
1763        </bitlbee-setting>
1764
1765        <bitlbee-setting name="user_agent" type="string" scope="account">
1766                <default>BitlBee</default>
1767
1768                <description>
1769                        <para>
1770                                Some Jabber servers are configured to only allow a few (or even just one) kinds of XMPP clients to connect to them.
1771                        </para>
1772                       
1773                        <para>
1774                                You can change this setting to make BitlBee present itself as a different client, so that you can still connect to these servers.
1775                        </para>
1776                </description>
1777        </bitlbee-setting>
1778
1779        <bitlbee-setting name="utf8_nicks" type="boolean" scope="global">
1780                <default>false</default>
1781
1782                <description>
1783                        <para>
1784                                Officially, IRC nicknames are restricted to ASCII. Recently some clients and servers started supporting Unicode nicknames though. To enable UTF-8 nickname support (contacts only) in BitlBee, enable this setting.
1785                        </para>
1786                       
1787                        <para>
1788                                To avoid confusing old clients, this setting is disabled by default. Be careful when you try it, and be prepared to be locked out of your BitlBee in case your client interacts poorly with UTF-8 nicknames.
1789                        </para>
1790                </description>
1791        </bitlbee-setting>
1792
1793        <bitlbee-setting name="web_aware" type="string" scope="account">
1794                <default>false</default>
1795
1796                <description>
1797                        <para>
1798                                ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default.
1799                        </para>
1800
1801                        <para>
1802                                Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled.
1803                        </para>
1804                </description>
1805        </bitlbee-setting>
1806
1807        <bitlbee-setting name="xmlconsole" type="boolean" scope="account">
1808                <default>false</default>
1809
1810                <description>
1811                        <para>
1812                                The Jabber module allows you to add a buddy <emphasis>xmlconsole</emphasis> to your contact list, which will then show you the raw XMPP stream between you and the server. You can also send XMPP packets to this buddy, which will then be sent to the server.
1813                        </para>
1814                        <para>
1815                                If you want to enable this XML console permanently (and at login time already), you can set this setting.
1816                        </para>
1817                </description>
1818        </bitlbee-setting>
1819
1820        <bitlbee-command name="rename">
1821                <short-description>Rename (renick) a buddy</short-description>
1822                <syntax>rename &lt;oldnick&gt; &lt;newnick&gt;</syntax>
1823                <syntax>rename -del &lt;oldnick&gt;</syntax>
1824
1825                <description>
1826                        <para>
1827                                Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
1828                        </para>
1829                       
1830                        <para>
1831                                <emphasis>rename -del</emphasis> can be used to erase your manually set nickname for a contact and reset it to what was automatically generated.
1832                        </para>
1833                </description>
1834
1835                <ircexample>
1836                        <ircline nick="itsme">rename itsme_ you</ircline>
1837                        <ircaction nick="itsme_">is now known as <emphasis>you</emphasis></ircaction>
1838                </ircexample>
1839
1840        </bitlbee-command>
1841
1842        <bitlbee-command name="yes">
1843                <short-description>Accept a request</short-description>
1844                <syntax>yes [&lt;number&gt;]</syntax>
1845
1846                <description>
1847                        <para>
1848                                Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the <emphasis>yes</emphasis> command.
1849                        </para>
1850
1851                        <para>
1852                                By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
1853                        </para>
1854                </description>
1855
1856        </bitlbee-command>
1857
1858        <bitlbee-command name="no">
1859                <short-description>Deny a request</short-description>
1860                <syntax>no [&lt;number&gt;]</syntax>
1861
1862                <description>
1863                        <para>
1864                                Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the <emphasis>no</emphasis> command.
1865                        </para>
1866
1867                        <para>
1868                                By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
1869                        </para>
1870                </description>
1871        </bitlbee-command>
1872
1873        <bitlbee-command name="plugins">
1874                <short-description>List all the external plugins and protocols</short-description>
1875                <syntax>plugins [info &lt;name&gt;]</syntax>
1876
1877                <description>
1878                        <para>
1879                                This gives you a list of all the external plugins and protocols.
1880                        </para>
1881
1882                        <para>
1883                                Use the <emphasis>info</emphasis> subcommand to get more details about a plugin.
1884                        </para>
1885                </description>
1886
1887        </bitlbee-command>
1888
1889        <bitlbee-command name="qlist">
1890                <short-description>List all the unanswered questions root asked</short-description>
1891                <syntax>qlist</syntax>
1892
1893                <description>
1894                        <para>
1895                                This gives you a list of all the unanswered questions from root.
1896                        </para>
1897                </description>
1898
1899        </bitlbee-command>
1900
1901        <bitlbee-command name="register">
1902                <short-description>Register yourself</short-description>
1903                <syntax>register [&lt;password&gt;]</syntax>
1904
1905                <description>
1906                        <para>
1907                                BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the <emphasis>register</emphasis> command.
1908                        </para>
1909
1910                        <para>
1911                                Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
1912                        </para>
1913
1914                        <para>
1915                                To identify yourself in later sessions, you can use the <emphasis>identify</emphasis> command. To change your password later, you can use the <emphasis>set password</emphasis> command.
1916                        </para>
1917
1918                        <para>
1919                                You can omit the password and enter it separately using the IRC /OPER command. This lets you enter your password without your IRC client echoing it on screen or recording it in logs.
1920                        </para>
1921                </description>
1922
1923        </bitlbee-command>
1924
1925        <bitlbee-command name="identify">
1926                <syntax>identify [-noload|-force] [&lt;password&gt;]</syntax>
1927                <short-description>Identify yourself with your password</short-description>
1928
1929                <description>
1930                        <para>
1931                                BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the <emphasis>register</emphasis> command.
1932                        </para>
1933
1934                        <para>
1935                                Once you're registered, you can change your password using <emphasis>set password &lt;password&gt;</emphasis>.
1936                        </para>
1937
1938                        <para>
1939                                The <emphasis>-noload</emphasis> and <emphasis>-force</emphasis> flags can be used to identify when you're logged into some IM accounts already. <emphasis>-force</emphasis> will let you identify yourself and load all saved accounts (and keep the accounts you're logged into already).
1940                        </para>
1941                       
1942                        <para>
1943                                <emphasis>-noload</emphasis> will log you in but not load any accounts and settings saved under your current nickname. These will be overwritten once you save your settings (i.e. when you disconnect).
1944                        </para>
1945
1946                        <para>
1947                                You can omit the password and enter it separately using the IRC /OPER command. This lets you enter your password without your IRC client echoing it on screen or recording it in logs.
1948                        </para>
1949                </description>
1950        </bitlbee-command>
1951
1952        <bitlbee-command name="drop">
1953                <syntax>drop &lt;password&gt;</syntax>
1954                <short-description>Drop your account</short-description>
1955
1956                <description>
1957                        <para>
1958                                Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
1959                        </para>
1960                </description>
1961        </bitlbee-command>
1962
1963        <bitlbee-command name="blist">
1964                <syntax>blist [all|online|offline|away] [&lt;pattern&gt;]</syntax>
1965                <short-description>List all the buddies in the current channel</short-description>
1966
1967                <description>
1968                        <para>
1969                                You can get a more readable buddy list using the <emphasis>blist</emphasis> command. If you want a complete list (including the offline users) you can use the <emphasis>all</emphasis> argument.
1970                        </para>
1971
1972                        <para>
1973                                A perl-compatible regular expression can be supplied as <emphasis>pattern</emphasis> to filter the results (case-insensitive).
1974                        </para>
1975                </description>
1976
1977        </bitlbee-command>
1978
1979        <bitlbee-command name="group">
1980                <short-description>Contact group management</short-description>
1981                <syntax>group [ list | info &lt;group&gt; ]</syntax>
1982
1983                <description>
1984                        <para>
1985                                The <emphasis>group list</emphasis> command shows a list of all groups defined so far.
1986                        </para>
1987                       
1988                        <para>
1989                                The <emphasis>group info</emphasis> command shows a list of all members of a the group &lt;group&gt;.
1990                        </para>
1991                       
1992                        <para>
1993                                If you want to move contacts between groups, you can use the IRC <emphasis>/invite</emphasis> command. Also, if you use the <emphasis>add</emphasis> command in a control channel configured to show just one group, the new contact will automatically be added to that group.
1994                        </para>
1995                </description>
1996        </bitlbee-command>
1997       
1998        <bitlbee-command name="transfer">
1999                <short-description>Monitor, cancel, or reject file transfers</short-description>
2000                <syntax>transfer [&lt;cancel&gt; id | &lt;reject&gt;]</syntax>
2001               
2002                <description>
2003                        <para>
2004                                Without parameters the currently pending file transfers and their status will be listed. Available actions are <emphasis>cancel</emphasis> and <emphasis>reject</emphasis>. See <emphasis>help transfer &lt;action&gt;</emphasis> for more information.
2005                        </para>
2006
2007                        <ircexample>
2008                                <ircline nick="ulim">transfer</ircline>
2009                        </ircexample>
2010                </description>
2011               
2012                <bitlbee-command name="cancel">
2013                        <short-description>Cancels the file transfer with the given id</short-description>
2014                        <syntax>transfer &lt;cancel&gt; id</syntax>
2015
2016                        <description>
2017                                <para>Cancels the file transfer with the given id</para>
2018                        </description>
2019
2020                        <ircexample>
2021                                <ircline nick="ulim">transfer cancel 1</ircline>
2022                                <ircline nick="root">Canceling file transfer for test</ircline>
2023                        </ircexample>
2024                </bitlbee-command>
2025
2026                <bitlbee-command name="reject">
2027                        <short-description>Rejects all incoming transfers</short-description>
2028                        <syntax>transfer &lt;reject&gt;</syntax>
2029
2030                        <description>
2031                                <para>Rejects all incoming (not already transferring) file transfers. Since you probably have only one incoming transfer at a time, no id is necessary. Or is it?</para>
2032                        </description>
2033
2034                        <ircexample>
2035                                <ircline nick="ulim">transfer reject</ircline>
2036                        </ircexample>
2037                </bitlbee-command>
2038        </bitlbee-command>
2039       
2040</chapter>
Note: See TracBrowser for help on using the repository browser.