source: doc/user-guide/commands.xml @ 00540d4

1.2.8
Last change on this file since 00540d4 was 8eb0b76, checked in by Wilmer van der Gaast <wilmer@…>, at 2010-07-04T17:25:05Z

Document the base_url setting (for using other Twitter API services).

  • Property mode set to 100644
File size: 46.1 KB
Line 
1<chapter id="commands">
2        <title>Bitlbee commands</title>
3
4        <command-list/>
5
6        <bitlbee-command name="account">
7                <short-description>IM-account list maintenance</short-description>
8                <syntax>account &lt;action&gt; [&lt;arguments&gt;]</syntax>
9
10                <description>
11
12                        <para>
13                                Available actions: add, del, list, on, off and set. See <emphasis>help account &lt;action&gt;</emphasis> for more information.
14                        </para>
15
16                </description>
17
18                <bitlbee-command name="add">
19                        <syntax>account add &lt;protocol&gt; &lt;username&gt; &lt;password&gt;</syntax>
20
21                        <description>
22                                <para>
23                                        Adds an account on the given server with the specified protocol, username and password to the account list. Supported protocols right now are: Jabber, MSN, OSCAR (AIM/ICQ), Yahoo and Twitter. For more information about adding an account, see <emphasis>help account add &lt;protocol&gt;</emphasis>.
24                                </para>
25                        </description>
26                       
27                        <bitlbee-command name="jabber">
28                                <syntax>account add jabber &lt;handle@server.tld&gt; &lt;password&gt;</syntax>
29
30                                <description>
31                                        <para>
32                                                The handle should be a full handle, including the domain name. You can specify a servername if necessary. Normally BitlBee doesn't need this though, since it's able to find out the server by doing DNS SRV lookups.
33                                        </para>
34
35                                        <para>
36                                                In previous versions it was also possible to specify port numbers and/or SSL in the server tag. This is deprecated and should now be done using the <emphasis>account set</emphasis> command. This also applies to specifying a resource in the handle (like <emphasis>wilmer@bitlbee.org/work</emphasis>).
37                                        </para>
38                                </description>
39                        </bitlbee-command>
40
41                        <bitlbee-command name="msn">
42                                <syntax>account add msn &lt;handle@server.tld&gt; &lt;password&gt;</syntax>
43
44                                <description>
45                                        <para>
46                                                For MSN connections there are no special arguments.
47                                        </para>
48                                </description>
49                        </bitlbee-command>
50                       
51                        <bitlbee-command name="oscar">
52                                <syntax>account add oscar &lt;handle&gt; &lt;password&gt;</syntax>
53
54                                <description>
55                                        <para>
56                                                OSCAR is the protocol used to connect to AIM and/or ICQ. The servers will automatically detect if you're using a numeric or non-numeric username so there's no need to tell which network you want to connect to.
57                                        </para>
58                                </description>
59
60                                <ircexample>
61                                        <ircline nick="wilmer">account add oscar 72696705 hobbelmeeuw</ircline>
62                                        <ircline nick="root">Account successfully added</ircline>
63                                </ircexample>
64                        </bitlbee-command>
65                       
66                        <bitlbee-command name="twitter">
67                                <syntax>account add twitter &lt;handle&gt; &lt;password&gt;</syntax>
68
69                                <description>
70                                        <para>
71                                                This module gives you simple access to Twitter. Although it uses the Twitter API, only Twitter itself is supported at the moment.
72                                        </para>
73                                       
74                                        <para>
75                                                By default all your Twitter contacts will come from a contact called twitter_(yourusername). You can change this behaviour using the <emphasis>mode</emphasis> setting (see <emphasis>help set mode</emphasis>).
76                                        </para>
77                                       
78                                        <para>
79                                                To send tweets yourself, send them to the twitter_(yourusername) contact, or just write in the groupchat channel if you enabled that option.
80                                        </para>
81
82                                        <para>
83                                                Since Twitter now requires OAuth authentication, you should not enter your Twitter password into BitlBee. Just type a bogus password. The first time you log in, BitlBee will start OAuth authentication. (See <emphasis>help set oauth</emphasis>.)
84                                        </para>
85                                </description>
86                        </bitlbee-command>
87
88                        <bitlbee-command name="yahoo">
89                                <syntax>account add yahoo &lt;handle&gt; &lt;password&gt;</syntax>
90
91                                <description>
92                                        <para>
93                                                For Yahoo! connections there are no special arguments.
94                                        </para>
95                                </description>
96                        </bitlbee-command>
97
98                </bitlbee-command>
99
100                <bitlbee-command name="del">
101                        <syntax>account del &lt;account id&gt;</syntax>
102
103                        <description>
104                                <para>
105                                        This commands deletes an account from your account list. You should signoff the account before deleting it.
106                                </para>
107
108
109                                <para>
110                                        The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
111                                </para>
112                        </description>
113                </bitlbee-command>
114
115                <bitlbee-command name="on">
116                        <syntax>account on [&lt;account id&gt;]</syntax>
117
118                        <description>
119                                <para>
120                                        This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set.
121                                </para>
122
123                                <para>
124                                        The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
125                                </para>
126                        </description>
127
128                </bitlbee-command>
129
130                <bitlbee-command name="off">
131                        <syntax>account off [&lt;account id&gt;]</syntax>
132
133                        <description>
134                                <para>
135                                        This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects.
136                                </para>
137
138                                <para>
139                                        The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
140                                </para>
141                        </description>
142                </bitlbee-command>
143
144                <bitlbee-command name="list">
145                        <syntax>account list</syntax>
146
147                        <description>
148                                <para>
149                                        This command gives you a list of all the accounts known by BitlBee.
150                                </para>
151                        </description>
152                </bitlbee-command>
153
154                <bitlbee-command name="set">
155                        <syntax>account set &lt;account id&gt;</syntax>
156                        <syntax>account set &lt;account id&gt;/&lt;setting&gt;</syntax>
157                        <syntax>account set &lt;account id&gt;/&lt;setting&gt; &lt;value&gt;</syntax>
158                        <syntax>account set -del &lt;account id&gt;/&lt;setting&gt;</syntax>
159
160                        <description>
161                                <para>
162                                        This command can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing <emphasis>account set &lt;account id&gt;</emphasis>.
163                                </para>
164                               
165                                <para>
166                                        For more infomation about a setting, see <emphasis>help set &lt;setting&gt;</emphasis>.
167                                </para>
168                               
169                                <para>
170                                        The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
171                                </para>
172                        </description>
173                </bitlbee-command>
174        </bitlbee-command>
175
176        <bitlbee-command name="chat">
177                <short-description>Chatroom list maintenance</short-description>
178                <syntax>chat &lt;action&gt; [&lt;arguments&gt;]</syntax>
179
180                <description>
181
182                        <para>
183                                Available actions: add, del, list, with and set. See <emphasis>help chat &lt;action&gt;</emphasis> for more information.
184                        </para>
185
186                </description>
187
188                <bitlbee-command name="add">
189                        <syntax>chat add &lt;account&gt; &lt;room&gt; [&lt;channel&gt;]</syntax>
190
191                        <description>
192                                <para>
193                                        Add a chatroom to the list of chatrooms you're interested in. BitlBee needs this list to map room names to a proper IRC channel name.
194                                </para>
195
196                                <para>
197                                        After adding a room to your list, you can simply use the IRC /join command to enter the room. Also, you can tell BitlBee to automatically join the room when you log in. (See <emphasis>chat set</emphasis>)
198                                </para>
199
200                                <para>
201                                        Password-protected rooms work exactly like on IRC, by passing the password as an extra argument to /join.
202                                </para>
203                        </description>
204
205                </bitlbee-command>
206
207                <bitlbee-command name="del">
208                        <syntax>chat del &lt;chat id&gt;</syntax>
209
210                        <description>
211                                <para>
212                                        This commands deletes an chatroom from your list.
213                                </para>
214
215                                <para>
216                                        The room ID can be a number (see <emphasis>chat list</emphasis>), or (part of) the name of the room/channel.
217                                </para>
218                        </description>
219                </bitlbee-command>
220
221                <bitlbee-command name="list">
222                        <syntax>chat list</syntax>
223
224                        <description>
225                                <para>
226                                        This command gives you a list of all the chatrooms known by BitlBee.
227                                </para>
228                        </description>
229                </bitlbee-command>
230
231                <bitlbee-command name="with">
232                        <syntax>chat with &lt;nickname&gt;</syntax>
233
234                        <description>
235                                <para>
236                                        While most <emphasis>chat</emphasis> subcommands are about named chatrooms, this command can be used to open an unnamed groupchat with one or more persons. This command is what <emphasis>/join #nickname</emphasis> used to do in older BitlBee versions.
237                                </para>
238                        </description>
239                </bitlbee-command>
240
241                <bitlbee-command name="set">
242                        <syntax>chat set &lt;chat id&gt;</syntax>
243                        <syntax>chat set &lt;chat id&gt;/&lt;setting&gt;</syntax>
244                        <syntax>chat set &lt;chat id&gt;/&lt;setting&gt; &lt;value&gt;</syntax>
245                        <syntax>chat set -del &lt;chat id&gt;/&lt;setting&gt;</syntax>
246
247                        <description>
248                                <para>
249                                        This command can be used to change various settings for chatrooms.
250                                </para>
251                               
252                                <para>
253                                        For more infomation about a setting, see <emphasis>help set &lt;setting&gt;</emphasis>.
254                                </para>
255                               
256                                <para>
257                                        The room ID can be a number (see <emphasis>chat list</emphasis>), or (part of) the name of the room/channel.
258                                </para>
259                        </description>
260                </bitlbee-command>
261        </bitlbee-command>
262
263        <bitlbee-command name="add">
264                <short-description>Add a buddy to your contact list</short-description>
265                <syntax>add &lt;connection&gt; &lt;handle&gt; [&lt;nick&gt;]</syntax>
266                <syntax>add -tmp &lt;connection&gt; &lt;handle&gt; [&lt;nick&gt;]</syntax>
267
268                <description>
269                        <para>
270                                Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
271                        </para>
272
273                        <para>
274                                If you want, you can also tell BitlBee what nick to give the new contact. The -tmp option adds the buddy to the internal BitlBee structures only, not to the real contact list (like done by <emphasis>set handle_unknown add</emphasis>). This allows you to talk to people who are not in your contact list. This normally won't show you any presence notifications.
275                        </para>
276                </description>
277
278                <ircexample>
279                        <ircline nick="ctrlsoft">add 3 gryp@jabber.org grijp</ircline>
280                        <ircaction nick="grijp" hostmask="gryp@jabber.org">has joined <emphasis>&amp;bitlbee</emphasis></ircaction>
281                </ircexample>
282        </bitlbee-command>
283
284        <bitlbee-command name="info">
285                <short-description>Request user information</short-description>
286                <syntax>info &lt;connection&gt; &lt;handle&gt;</syntax>
287                <syntax>info &lt;nick&gt;</syntax>
288
289                <description>
290                        <para>
291                                Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols (ATM Yahoo! and MSN) it'll give you an URL which you can visit with a normal web browser to get the information.
292                        </para>
293                </description>
294
295                <ircexample>
296                        <ircline nick="ctrlsoft">info 0 72696705</ircline>
297                        <ircline nick="root">User info - UIN: 72696705   Nick: Lintux   First/Last name: Wilmer van der Gaast   E-mail: lintux@lintux.cx</ircline>
298                </ircexample>
299
300        </bitlbee-command>
301
302        <bitlbee-command name="remove">
303                <short-description>Remove a buddy from your contact list</short-description>
304                <syntax>remove &lt;nick&gt;</syntax>
305
306                <description>
307                        <para>
308                                Removes the specified nick from your buddy list.
309                        </para>
310                </description>
311
312                <ircexample>
313                        <ircline nick="ctrlsoft">remove gryp</ircline>
314                        <ircaction nick="gryp" hostmask="gryp@jabber.jabber.org">has quit <emphasis>[Leaving...]</emphasis></ircaction>
315                </ircexample>
316
317        </bitlbee-command>
318
319        <bitlbee-command name="block">
320                <short-description>Block someone</short-description>
321                <syntax>block &lt;nick&gt;</syntax>
322                <syntax>block &lt;connection&gt; &lt;handle&gt;</syntax>
323                <syntax>block &lt;connection&gt;</syntax>
324
325                <description>
326                        <para>
327                                Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
328                        </para>
329                       
330                        <para>
331                                When called with only a connection specification as an argument, the command displays the current block list for that connection.
332                        </para>
333                </description>
334        </bitlbee-command>
335
336        <bitlbee-command name="allow">
337                <short-description>Unblock someone</short-description>
338                <syntax>allow &lt;nick&gt;</syntax>
339                <syntax>allow &lt;connection&gt; &lt;handle&gt;</syntax>
340
341                <description>
342                        <para>
343                                Reverse of block. Unignores the specified user or user handle on specified connection.
344                        </para>
345                       
346                        <para>
347                                When called with only a connection specification as an argument, the command displays the current allow list for that connection.
348                        </para>
349                </description>
350        </bitlbee-command>
351
352        <bitlbee-command name="set">
353                <short-description>Miscellaneous settings</short-description>
354                <syntax>set</syntax>
355                <syntax>set &lt;variable&gt;</syntax>
356                <syntax>set &lt;variable&gt; &lt;value&gt;</syntax>
357                <syntax>set -del &lt;variable&gt;</syntax>
358
359                <description>
360
361                        <para>
362                                Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument. With <emphasis>-del</emphasis> you can reset a setting to its default value.
363                        </para>
364
365                        <para>
366                                To get more help information about a setting, try:
367                        </para>
368
369                </description>
370
371                <ircexample>
372                        <ircline nick="ctrlsoft">help set private</ircline>
373                </ircexample>
374
375        </bitlbee-command>
376
377        <bitlbee-command name="help">
378                <short-description>BitlBee help system</short-description>
379
380                <syntax>help [subject]</syntax>
381
382                <description>
383                        <para>
384                                This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
385                        </para>
386                </description>
387        </bitlbee-command>
388
389        <bitlbee-command name="save">
390                <short-description>Save your account data</short-description>
391                <syntax>save</syntax>
392
393                <description>
394                        <para>
395                                This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
396                        </para>
397                </description>
398        </bitlbee-command>
399
400        <bitlbee-setting name="auto_connect" type="boolean" scope="both">
401                <default>true</default>
402
403                <description>
404                        <para>
405                                With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
406                        </para>
407                       
408                        <para>
409                                This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_connect</emphasis> setting is disabled!)
410                        </para>
411                </description>
412        </bitlbee-setting>
413
414        <bitlbee-setting name="auto_join" type="boolean" scope="chat">
415                <default>false</default>
416
417                <description>
418                        <para>
419                                With this option enabled, BitlBee will automatically join this chatroom when you log in.
420                        </para>
421                </description>
422        </bitlbee-setting>
423
424        <bitlbee-setting name="auto_reconnect" type="boolean" scope="both">
425                <default>true</default>
426
427                <description>
428                        <para>
429                                If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
430                        </para>
431
432                        <para>
433                                See also the <emphasis>auto_reconnect_delay</emphasis> setting.
434                        </para>
435
436                        <para>
437                                This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_reconnect</emphasis> setting is disabled!)
438                        </para>
439                </description>
440        </bitlbee-setting>
441
442        <bitlbee-setting name="auto_reconnect_delay" type="string" scope="global">
443                <default>5*3&lt;900</default>
444
445                <description>
446                        <para>
447                                Tell BitlBee after how many seconds it should attempt to bring a broken IM-connection back up.
448                        </para>
449
450                        <para>
451                                This can be one integer, for a constant delay. One can also set it to something like &quot;10*10&quot;, which means wait for ten seconds on the first reconnect, multiply it by ten on every failure. Once successfully connected, this delay is re-set to the initial value. With &lt; you can give a maximum delay.
452                        </para>
453
454                        <para>
455                                See also the <emphasis>auto_reconnect</emphasis> setting.
456                        </para>
457                </description>
458        </bitlbee-setting>
459
460        <bitlbee-setting name="away" type="string" scope="both">
461                <description>
462                        <para>
463                                To mark yourself as away, it is recommended to just use <emphasis>/away</emphasis>, like on normal IRC networks. If you want to mark yourself as away on only one IM network, you can use this per-account setting.
464                        </para>
465
466                        <para>
467                                You can set it to any value and BitlBee will try to map it to the most appropriate away state for every open IM connection, or set it as a free-form away message where possible.
468                        </para>
469
470                        <para>
471                                Any per-account away setting will override globally set away states. To un-set the setting, use <emphasis>set -del away</emphasis>.
472                        </para>
473                </description>
474        </bitlbee-setting>
475
476        <bitlbee-setting name="away_devoice" type="boolean" scope="global">
477                <default>true</default>
478
479                <description>
480                        <para>
481                                With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
482                        </para>
483                </description>
484        </bitlbee-setting>
485
486        <bitlbee-setting name="base_url" type="string" scope="account">
487                <default>http://twitter.com</default>
488
489                <description>
490                        <para>
491                                There are more services that understand the Twitter API than just Twitter.com. BitlBee can connect to all Twitter API implementations.
492                        </para>
493
494                        <para>
495                                For example, set this setting to <emphasis>http://identi.ca/api</emphasis> to use Identi.ca.
496                        </para>
497
498                        <para>
499                                Keep two things in mind: When not using Twitter, you <emphasis>must</emphasis> also disable the <emphasis>oauth</emphasis> setting as it currently only works with Twitter. If you're still having issues, make sure there is <emphasis>no</emphasis> slash at the end of the URL you enter here.
500                        </para>
501                </description>
502        </bitlbee-setting>
503
504        <bitlbee-setting name="buddy_sendbuffer" type="boolean" scope="global">
505                <default>false</default>
506
507                <description>
508                        <para>
509                                By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
510                        </para>
511
512                        <para>
513                                Using the <emphasis>buddy_sendbuffer_delay</emphasis> setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
514                        </para>
515
516                        <para>
517                                Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
518                        </para>
519                </description>
520        </bitlbee-setting>
521
522        <bitlbee-setting name="buddy_sendbuffer_delay" type="integer" scope="global">
523                <default>200</default>
524
525                <description>
526
527                        <para>
528                                Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds.
529                        </para>
530
531                        <para>
532                                See also the <emphasis>buddy_sendbuffer</emphasis> setting.
533                        </para>
534                </description>
535        </bitlbee-setting>
536
537        <bitlbee-setting name="charset" type="string" scope="global">
538                <default>utf-8</default>
539                <possible-values>you can get a list of all possible values by doing 'iconv -l' in a shell</possible-values>
540
541                <description>
542                        <para>
543                                This setting tells BitlBee what your IRC client sends and expects. It should be equal to the charset setting of your IRC client if you want to be able to send and receive non-ASCII text properly.
544                        </para>
545
546                        <para>
547                                Most systems use UTF-8 these days. On older systems, an iso8859 charset may work better. For example, iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://www.unicodecharacter.com/charsets/iso8859.html
548                        </para>
549                </description>
550
551        </bitlbee-setting>
552
553        <bitlbee-setting name="control_channel" type="string" scope="global">
554                <default>&amp;bitlbee</default>
555
556                <description>
557                        <para>
558                                Normally the control channel where you can see all your contacts is called "&amp;bitlbee". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
559                        </para>
560                </description>
561        </bitlbee-setting>
562
563        <bitlbee-setting name="debug" type="boolean" scope="global">
564                <default>false</default>
565
566                <description>
567                        <para>
568                                Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
569                        </para>
570                </description>
571        </bitlbee-setting>
572
573        <bitlbee-setting name="default_target" type="string" scope="global">
574                <default>root</default>
575                <possible-values>root, last</possible-values>
576
577                <description>
578                        <para>
579                                With this value set to <emphasis>root</emphasis>, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to <emphasis>last</emphasis>.
580                        </para>
581                </description>
582        </bitlbee-setting>
583
584        <bitlbee-setting name="display_name" type="string" scope="account">
585                <description>
586                        <para>
587                                Currently only available for MSN connections. This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line.
588                        </para>
589                </description>
590        </bitlbee-setting>
591
592        <bitlbee-setting name="display_namechanges" type="boolean" scope="global">
593                <default>false</default>
594
595                <description>
596                        <para>
597                                With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name".
598                        </para>
599                </description>
600        </bitlbee-setting>
601
602        <bitlbee-setting name="display_timestamps" type="boolean" scope="global">
603                <default>true</default>
604
605                <description>
606                        <para>
607                                When incoming messages are old (i.e. offline messages and channel backlogs), BitlBee will prepend them with a timestamp. If you find them ugly or useless, you can use this setting to hide them.
608                        </para>
609                </description>
610        </bitlbee-setting>
611
612        <bitlbee-setting name="handle_unknown" type="string" scope="global">
613                <default>root</default>
614                <possible-values>root, add, add_private, add_channel, ignore</possible-values>
615
616                <description>
617                        <para>
618                                Messages from unknown users are echoed like this by default:
619                        </para>
620
621                        <ircexample>
622                                <ircline nick="root">Unknown message from handle 3137137:</ircline>
623                                <ircline nick="root">j0000! 1 4m l33t h4x0r! kill me!</ircline>
624                        </ircexample>
625
626                        <para>
627                                If you want this lame user to be added automatically, you can set this setting to "add". If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
628                        </para>
629
630                        <note>
631                                <para>
632                                        Auto-added users aren't added to your real contact list. This is because you don't want the user to get authorization requests. So when you restart BitlBee, the auto-added user will be gone. If you want to keep the person in your buddy-list, you have to fixate the add using the <emphasis>add</emphasis> command.
633                                </para>
634                        </note>
635                </description>
636
637        </bitlbee-setting>
638
639        <bitlbee-setting name="ignore_auth_requests" type="boolean" scope="account">
640                <default>false</default>
641
642                <description>
643                        <para>
644                                Only supported by OSCAR so far, you can use this setting to ignore ICQ authorization requests, which are hardly used for legitimate (i.e. non-spam) reasons anymore.
645                        </para>
646                </description>
647
648        </bitlbee-setting>
649
650        <bitlbee-setting name="lcnicks" type="boolean" scope="global">
651                <default>true</default>
652
653                <description>
654                        <para>
655                                Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer.
656                        </para>
657                </description>
658
659        </bitlbee-setting>
660
661        <bitlbee-setting name="local_display_name" type="boolean" scope="account">
662                <default>false</default>
663
664                <description>
665                        <para>
666                                Mostly meant to work around a bug in MSN servers (forgetting the display name set by the user), this setting tells BitlBee to store your display name locally and set this name on the MSN servers when connecting.
667                        </para>
668                </description>
669
670        </bitlbee-setting>
671
672        <bitlbee-setting name="mail_notifications" type="boolean" scope="account">
673                <default>false</default>
674
675                <description>
676                        <para>
677                                Some protocols (MSN, Yahoo!) can notify via IM about new e-mail. Since most people use their Hotmail/Yahoo! addresses as a spam-box, this is disabled default. If you want these notifications, you can enable this setting.
678                        </para>
679                </description>
680
681        </bitlbee-setting>
682
683        <bitlbee-setting name="message_length" type="integer" scope="account">
684                <default>140</default>
685
686                <description>
687                        <para>
688                                Since Twitter rejects messages longer than 140 characters, BitlBee can count message length and emit a warning instead of waiting for Twitter to reject it.
689                        </para>
690
691                        <para>
692                                You can change this limit here but this won't disable length checks on Twitter's side. You can also set it to 0 to disable the check in case you believe BitlBee doesn't count the characters correctly.
693                        </para>
694                </description>
695
696        </bitlbee-setting>
697
698        <bitlbee-setting name="mode" type="string" scope="account">
699                <possible-values>one, many, chat</possible-values>
700                <default>one</default>
701
702                <description>
703                        <para>
704                                By default, everything from the Twitter module will come from one nick, twitter_(yourusername). If you prefer to have individual nicks for everyone, you can set this setting to "many" instead.
705                        </para>
706                       
707                        <para>
708                                If you prefer to have all your Twitter things in a separate channel, you can set this setting to "chat".
709                        </para>
710                       
711                        <para>
712                                In the last two modes, you can send direct messages by /msg'ing your contacts directly. Note, however, that incoming DMs are not fetched yet.
713                        </para>
714                </description>
715
716        </bitlbee-setting>
717
718        <bitlbee-setting name="nick" type="string" scope="chat">
719
720                <description>
721                        <para>
722                                You can use this option to set your nickname in a chatroom. You won't see this nickname yourself, but other people in the room will. By default, BitlBee will use your username as the chatroom nickname.
723                        </para>
724                </description>
725        </bitlbee-setting>
726
727        <bitlbee-setting name="nick_source" type="string" scope="account">
728                <default>handle</default>
729                <possible-values>handle, full_name, first_name</possible-values>
730
731                <description>
732                        <para>
733                                By default, BitlBee generates a nickname for every contact by taking its handle and chopping off everything after the @. In some cases, this gives very inconvenient nicknames. The Facebook XMPP server is a good example, as all Facebook XMPP handles are numeric.
734                        </para>
735
736                        <para>
737                                With this setting set to <emphasis>full_name</emphasis>, the person's full name is used to generate a nickname. Or if you don't like long nicknames, set this setting to <emphasis>first_name</emphasis> instead and only the first word will be used. Note that the full name can be full of non-ASCII characters which will be stripped off.
738                        </para>
739                </description>
740        </bitlbee-setting>
741
742        <bitlbee-setting name="oauth" type="boolean" scope="account">
743                <default>true</default>
744
745                <description>
746                        <para>
747                                This enables OAuth authentication for Twitter accounts. From June 2010 this will be mandatory.
748                        </para>
749
750                        <para>
751                                With OAuth enabled, you shouldn't tell BitlBee your Twitter password. Just add your account with a bogus password and type <emphasis>account on</emphasis>. BitlBee will then give you a URL to authenticate with Twitter. If this succeeds, Twitter will return a PIN code which you can give back to BitlBee to finish the process.
752                        </para>
753
754                        <para>
755                                The resulting access token will be saved permanently, so you have to do this only once.
756                        </para>
757                </description>
758
759        </bitlbee-setting>
760
761        <bitlbee-setting name="ops" type="string" scope="global">
762                <default>both</default>
763                <possible-values>both, root, user, none</possible-values>
764
765                <description>
766                        <para>
767                                Some people prefer themself and root to have operator status in &amp;bitlbee, other people don't. You can change these states using this setting.
768                        </para>
769
770                        <para>
771                                The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
772                        </para>
773                </description>
774        </bitlbee-setting>
775
776        <bitlbee-setting name="password" type="string" scope="both">
777                <description>
778                        <para>
779                                Use this global setting to change your "NickServ" password.
780                        </para>
781                       
782                        <para>
783                                This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service.
784                        </para>
785                       
786                        <para>
787                                Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text.
788                        </para>
789                </description>
790        </bitlbee-setting>
791       
792        <bitlbee-setting name="port" type="integer" scope="account">
793                <description>
794                        <para>
795                                Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections.
796                        </para>
797                </description>
798        </bitlbee-setting>
799
800        <bitlbee-setting name="priority" type="integer" scope="account">
801                <default>0</default>
802
803                <description>
804                        <para>
805                                Can be set for Jabber connections. When connecting to one account from multiple places, this priority value will help the server to determine where to deliver incoming messages (that aren't addressed to a specific resource already).
806                        </para>
807
808                        <para>
809                                According to RFC 3921 servers will always deliver messages to the server with the highest priority value. Mmessages will not be delivered to resources with a negative priority setting (and should be saved as an off-line message if all available resources have a negative priority value).
810                        </para>
811                </description>
812        </bitlbee-setting>
813
814        <bitlbee-setting name="private" type="boolean" scope="global">
815                <default>true</default>
816
817                <description>
818                        <para>
819                                If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel.
820                        </para>
821
822                        <para>
823                                This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
824                        </para>
825                </description>
826        </bitlbee-setting>
827
828        <bitlbee-setting name="query_order" type="string" scope="global">
829                <default>lifo</default>
830                <possible-values>lifo, fifo</possible-values>
831
832                <description>
833                        <para>
834                                This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to <emphasis>lifo</emphasis>, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to <emphasis>fifo</emphasis>, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
835                        </para>
836
837                        <para>
838                                Although the <emphasis>fifo</emphasis> setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
839                        </para>
840                </description>
841        </bitlbee-setting>
842
843        <bitlbee-setting name="resource" type="string" scope="account">
844                <default>BitlBee</default>
845
846                <description>
847                        <para>
848                                Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string.
849                        </para>
850                </description>
851        </bitlbee-setting>
852
853        <bitlbee-setting name="resource_select" type="string" scope="account">
854                <default>activity</default>
855                <possible-values>priority, activity</possible-values>
856
857                <description>
858                        <para>
859                                Because the IRC interface makes it pretty hard to specify the resource to talk to (when a buddy is online through different resources), this setting was added.
860                        </para>
861
862                        <para>
863                                Normally it's set to <emphasis>priority</emphasis> which means messages will always be delivered to the buddy's resource with the highest priority. If the setting is set to <emphasis>activity</emphasis>, messages will be delivered to the resource that was last used to send you a message (or the resource that most recently connected).
864                        </para>
865                </description>
866        </bitlbee-setting>
867
868        <bitlbee-setting name="root_nick" type="string" scope="global">
869                <default>root</default>
870
871                <description>
872                        <para>
873                                Normally the "bot" that takes all your BitlBee commands is called "root". If you don't like this name, you can rename it to anything else using the <emphasis>rename</emphasis> command, or by changing this setting.
874                        </para>
875                </description>
876        </bitlbee-setting>
877
878        <bitlbee-setting name="save_on_quit" type="boolean" scope="global">
879                <default>true</default>
880
881                <description>
882                        <para>
883                                If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
884                        </para>
885                </description>
886        </bitlbee-setting>
887
888        <bitlbee-setting name="server" type="string" scope="account">
889                <description>
890                        <para>
891                                Can be set for Jabber- and OSCAR-connections. For Jabber, you might have to set this if the servername isn't equal to the part after the @ in the Jabber handle. For OSCAR this shouldn't be necessary anymore in recent BitlBee versions.
892                        </para>
893                </description>
894        </bitlbee-setting>
895
896        <bitlbee-setting name="show_offline" type="boolean" scope="global">
897                <default>false</default>
898
899                <description>
900                        <para>
901                                If enabled causes BitlBee to also show offline users in Channel. Online-users will get op, away-users voice and offline users none of both. This option takes effect as soon as you reconnect.
902                        </para>
903                </description>
904        </bitlbee-setting>
905
906        <bitlbee-setting name="simulate_netsplit" type="boolean" scope="global">
907                <default>true</default>
908
909                <description>
910                        <para>
911                                Some IRC clients parse quit messages sent by the IRC server to see if someone really left or just disappeared because of a netsplit. By default, BitlBee tries to simulate netsplit-like quit messages to keep the control channel window clean. If you don't like this (or if your IRC client doesn't support this) you can disable this setting.
912                        </para>
913                </description>
914        </bitlbee-setting>
915
916        <bitlbee-setting name="ssl" type="boolean" scope="account">
917                <default>false</default>
918
919                <description>
920                        <para>
921                                Currently only available for Jabber connections. Set this to true if the server accepts SSL connections.
922                        </para>
923                </description>
924        </bitlbee-setting>
925
926        <bitlbee-setting name="status" type="string" scope="both">
927                <description>
928                        <para>
929                                Certain protocols (like Jabber/XMPP) support status messages, similar to away messages. They can be used to indicate things like your location or activity, without showing up as away/busy.
930                        </para>
931
932                        <para>
933                                This setting can be used to set such a message. It will be available as a per-account setting for protocols that support it, and also as a global setting (which will then automatically be used for all protocols that support it).
934                        </para>
935
936                        <para>
937                                Away states set using <emphasis>/away</emphasis> or the <emphasis>away</emphasis> setting will override this setting. To un-set the setting, use <emphasis>set -del status</emphasis>.
938                        </para>
939                </description>
940        </bitlbee-setting>
941
942        <bitlbee-setting name="strip_html" type="boolean" scope="global">
943                <default>true</default>
944
945                <description>
946                        <para>
947                                Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML.
948                        </para>
949                        <para>
950                                If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to <emphasis>always</emphasis>, but this might sometimes accidentally strip non-HTML things too.
951                        </para>
952                </description>
953        </bitlbee-setting>
954
955        <bitlbee-setting name="switchboard_keepalives" type="boolean" scope="account">
956                <default>false</default>
957
958                <description>
959                        <para>
960                                Turn on this flag if you have difficulties talking to offline/invisible contacts.
961                        </para>
962                       
963                        <para>
964                                With this setting enabled, BitlBee will send keepalives to MSN switchboards with offline/invisible contacts every twenty seconds. This should keep the server and client on the other side from shutting it down.
965                        </para>
966                       
967                        <para>
968                                This is useful because BitlBee doesn't support MSN offline messages yet and the MSN servers won't let the user reopen switchboards to offline users. Once offline messaging is supported, this flag might be removed.
969                        </para>
970                </description>
971        </bitlbee-setting>
972
973        <bitlbee-setting name="timezone" type="string" scope="global">
974                <default>local</default>
975                <possible-values>local, utc, gmt, timezone-spec</possible-values>
976
977                <description>
978                        <para>
979                                If message timestamps are available for offline messages or chatroom backlogs, BitlBee will display them as part of the message. By default it will use the local timezone. If you're not in the same timezone as the BitlBee server, you can adjust the timestamps using this setting.
980                        </para>
981
982                        <para>
983                                Values local/utc/gmt should be self-explanatory. timezone-spec is a time offset in hours:minutes, for example: -8 for Pacific Standard Time, +2 for Central European Summer Time, +5:30 for Indian Standard Time.
984                        </para>
985                </description>
986        </bitlbee-setting>
987
988        <bitlbee-setting name="tls" type="boolean" scope="account">
989                <default>try</default>
990
991                <description>
992                        <para>
993                                Newer Jabber servers allow clients to convert a plain-text session to a TLS/SSL-encrypted session. Normally (with this setting set to <emphasis>try</emphasis>) BitlBee will do this, if possible.
994                        </para>
995
996                        <para>
997                                If you want to force BitlBee to use TLS sessions only (and to give up if that doesn't seem to be possible) you can set this setting to <emphasis>true</emphasis>. Set it to <emphasis>false</emphasis> if you want the session to remain plain-text.
998                        </para>
999                </description>
1000        </bitlbee-setting>
1001
1002        <bitlbee-setting name="to_char" type="string" scope="global">
1003                <default>": "</default>
1004
1005                <description>
1006                        <para>
1007                                It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using <emphasis>set to_char</emphasis>.
1008                        </para>
1009
1010                        <para>
1011                                Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
1012                        </para>
1013                </description>
1014        </bitlbee-setting>
1015
1016        <bitlbee-setting name="typing_notice" type="boolean" scope="global">
1017                <default>false</default>
1018
1019                <description>
1020                        <para>
1021                                Sends you a /notice when a user starts typing a message (if supported by the IM protocol and the user's client). To use this, you most likely want to use a script in your IRC client to show this information in a more sensible way.
1022                        </para>
1023                </description>
1024        </bitlbee-setting>
1025
1026        <bitlbee-setting name="user_agent" type="string" scope="account">
1027                <default>BitlBee</default>
1028
1029                <description>
1030                        <para>
1031                                Some Jabber servers are configured to only allow a few (or even just one) kinds of XMPP clients to connect to them.
1032                        </para>
1033                       
1034                        <para>
1035                                You can change this setting to make BitlBee present itself as a different client, so that you can still connect to these servers.
1036                        </para>
1037                </description>
1038        </bitlbee-setting>
1039
1040        <bitlbee-setting name="web_aware" type="string" scope="account">
1041                <default>false</default>
1042
1043                <description>
1044                        <para>
1045                                ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default.
1046                        </para>
1047
1048                        <para>
1049                                Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled.
1050                        </para>
1051                </description>
1052        </bitlbee-setting>
1053
1054        <bitlbee-setting name="xmlconsole" type="boolean" scope="account">
1055                <default>false</default>
1056
1057                <description>
1058                        <para>
1059                                The Jabber module allows you to add a buddy <emphasis>xmlconsole</emphasis> to your contact list, which will then show you the raw XMPP stream between you and the server. You can also send XMPP packets to this buddy, which will then be sent to the server.
1060                        </para>
1061                        <para>
1062                                If you want to enable this XML console permanently (and at login time already), you can set this setting.
1063                        </para>
1064                </description>
1065        </bitlbee-setting>
1066
1067        <bitlbee-command name="rename">
1068                <short-description>Rename (renick) a buddy</short-description>
1069                <syntax>rename &lt;oldnick&gt; &lt;newnick&gt;</syntax>
1070
1071                <description>
1072                        <para>
1073                                Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
1074                        </para>
1075                </description>
1076
1077                <ircexample>
1078                        <ircline nick="itsme">rename itsme_ you</ircline>
1079                        <ircaction nick="itsme_">is now known as <emphasis>you</emphasis></ircaction>
1080                </ircexample>
1081
1082        </bitlbee-command>
1083
1084        <bitlbee-command name="yes">
1085                <short-description>Accept a request</short-description>
1086                <syntax>yes [&lt;number&gt;]</syntax>
1087
1088                <description>
1089                        <para>
1090                                Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the <emphasis>yes</emphasis> command.
1091                        </para>
1092
1093                        <para>
1094                                By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
1095                        </para>
1096                </description>
1097
1098        </bitlbee-command>
1099
1100        <bitlbee-command name="no">
1101                <short-description>Deny a request</short-description>
1102                <syntax>no [&lt;number&gt;]</syntax>
1103
1104                <description>
1105                        <para>
1106                                Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the <emphasis>no</emphasis> command.
1107                        </para>
1108
1109                        <para>
1110                                By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
1111                        </para>
1112                </description>
1113        </bitlbee-command>
1114
1115        <bitlbee-command name="qlist">
1116                <short-description>List all the unanswered questions root asked</short-description>
1117                <syntax>qlist</syntax>
1118
1119                <description>
1120                        <para>
1121                                This gives you a list of all the unanswered questions from root.
1122                        </para>
1123                </description>
1124
1125        </bitlbee-command>
1126
1127        <bitlbee-command name="register">
1128                <short-description>Register yourself</short-description>
1129                <syntax>register &lt;password&gt;</syntax>
1130
1131                <description>
1132                        <para>
1133                                BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the <emphasis>register</emphasis> command.
1134                        </para>
1135
1136                        <para>
1137                                Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
1138                        </para>
1139
1140                        <para>
1141                                To identify yourself in later sessions, you can use the <emphasis>identify</emphasis> command. To change your password later, you can use the <emphasis>set password</emphasis> command.
1142                        </para>
1143                </description>
1144
1145        </bitlbee-command>
1146
1147        <bitlbee-command name="identify">
1148                <syntax>identify &lt;password&gt;</syntax>
1149                <short-description>Identify yourself with your password</short-description>
1150
1151                <description>
1152                        <para>
1153                                BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the <emphasis>register</emphasis> command.
1154                        </para>
1155
1156                        <para>
1157                                Once you're registered, you can change your password using <emphasis>set password &lt;password&gt;</emphasis>.
1158                        </para>
1159                </description>
1160        </bitlbee-command>
1161
1162        <bitlbee-command name="drop">
1163                <syntax>drop &lt;password&gt;</syntax>
1164                <short-description>Drop your account</short-description>
1165
1166                <description>
1167                        <para>
1168                                Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
1169                        </para>
1170                </description>
1171        </bitlbee-command>
1172
1173        <bitlbee-command name="blist">
1174                <syntax>blist [all|online|offline|away]</syntax>
1175                <short-description>List all the buddies in your contact list</short-description>
1176
1177                <description>
1178                        <para>
1179                                You can get a better readable buddy list using the <emphasis>blist</emphasis> command. If you want a complete list (including the offline users) you can use the <emphasis>all</emphasis> argument.
1180                        </para>
1181                </description>
1182
1183        </bitlbee-command>
1184
1185        <bitlbee-command name="nick">
1186                <short-description>Change friendly name, nick</short-description>
1187                <syntax>nick &lt;connection&gt; [&lt;new nick&gt;]</syntax>
1188                <syntax>nick &lt;connection&gt;</syntax>
1189
1190                <description>
1191                        <para>
1192                                Deprecated: Use the per-account <emphasis>display_name</emphasis> setting to read and change this information.
1193                        </para>
1194                </description>
1195
1196                <ircexample>
1197                        <ircline nick="wouter">account set 1/display_name "The majestik møøse"</ircline>
1198                        <ircline nick="root">display_name = `The majestik møøse'</ircline>
1199                </ircexample>
1200
1201        </bitlbee-command>
1202</chapter>
Note: See TracBrowser for help on using the repository browser.