Context Navigation

source: doc/user-guide/commands.xml @ f9756bd

Last change on this file since f9756bd was b27557b, checked in by Wilmer van der Gaast <wilmer@…>, at 2008-03-02T22:12:06Z
More documentation fixes: Cleaned up dead links, removed more outdated information (like the "set charset" default, which is UTF-8 for ages already).
Property mode set to `100644`
File size: 34.0 KB

Line
1	<chapter id="commands">
2	<title>Bitlbee commands</title>
3
4	<command-list/>
5
6	<bitlbee-command name="account">
7	<short-description>IM-account list maintenance</short-description>
8	<syntax>account <action> [<arguments>]</syntax>
9
10	<description>
11
12	<para>
13	Available actions: add, del, list, on, off and set. See <emphasis>help account <action></emphasis> for more information.
14	</para>
15
16	</description>
17
18	<bitlbee-command name="add">
19	<syntax>account add <protocol> <username> <password></syntax>
20
21	<description>
22	<para>
23	Adds an account on the given server with the specified protocol, username and password to the account list. Supported protocols right now are: Jabber, MSN, OSCAR (AIM/ICQ) and Yahoo. For more information about adding an account, see <emphasis>help account add <protocol></emphasis>.
24	</para>
25	</description>
26
27	<bitlbee-command name="jabber">
28	<syntax>account add jabber <handle@server.tld> <password></syntax>
29
30	<description>
31	<para>
32	The handle should be a full handle, including the domain name. You can specify a servername if necessary. Normally BitlBee doesn't need this though, since it's able to find out the server by doing DNS SRV lookups.
33	</para>
34
35	<para>
36	In previous versions it was also possible to specify port numbers and/or SSL in the server tag. This is deprecated and should now be done using the <emphasis>account set</emphasis> command. This also applies to specifying a resource in the handle (like <emphasis>wilmer@bitlbee.org/work</emphasis>).
37	</para>
38	</description>
39	</bitlbee-command>
40
41	<bitlbee-command name="msn">
42	<syntax>account add msn <handle@server.tld> <password></syntax>
43
44	<description>
45	<para>
46	For MSN connections there are no special arguments.
47	</para>
48	</description>
49	</bitlbee-command>
50
51	<bitlbee-command name="oscar">
52	<syntax>account add oscar <handle> <password></syntax>
53
54	<description>
55	<para>
56	OSCAR is the protocol used to connect to AIM and/or ICQ. The servers will automatically detect if you're using a numeric or non-numeric username so there's no need to tell which network you want to connect to.
57	</para>
58	</description>
59
60	<ircexample>
61	<ircline nick="wilmer">account add oscar 72696705 hobbelmeeuw</ircline>
62	<ircline nick="root">Account successfully added</ircline>
63	</ircexample>
64	</bitlbee-command>
65
66	<bitlbee-command name="yahoo">
67	<syntax>account add yahoo <handle> <password></syntax>
68
69	<description>
70	<para>
71	For Yahoo! connections there are no special arguments.
72	</para>
73	</description>
74	</bitlbee-command>
75
76	</bitlbee-command>
77
78	<bitlbee-command name="del">
79	<syntax>account del <account id></syntax>
80
81	<description>
82	<para>
83	This commands deletes an account from your account list. You should signoff the account before deleting it.
84	</para>
85
86
87	<para>
88	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
89	</para>
90	</description>
91	</bitlbee-command>
92
93	<bitlbee-command name="on">
94	<syntax>account on [<account id>]</syntax>
95
96	<description>
97	<para>
98	This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set.
99	</para>
100
101	<para>
102	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
103	</para>
104	</description>
105
106	</bitlbee-command>
107
108	<bitlbee-command name="off">
109	<syntax>account off [<account id>]</syntax>
110
111	<description>
112	<para>
113	This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects.
114	</para>
115
116	<para>
117	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
118	</para>
119	</description>
120	</bitlbee-command>
121
122	<bitlbee-command name="list">
123	<syntax>account list</syntax>
124
125	<description>
126	<para>
127	This command gives you a list of all the accounts known by BitlBee, including the numbers you'll need for most account commands.
128	</para>
129	</description>
130	</bitlbee-command>
131
132	<bitlbee-command name="set">
133	<syntax>account set <account id></syntax>
134	<syntax>account set <account id>/<setting></syntax>
135	<syntax>account set <account id>/<setting> <value></syntax>
136	<syntax>account set -del <account id>/<setting></syntax>
137
138	<description>
139	<para>
140	This account can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing <emphasis>account set <account id></emphasis>.
141	</para>
142
143	<para>
144	For more infomation about a setting, see <emphasis>help set <setting></emphasis>. For details about the syntax of this command, see <emphasis>help set</emphasis>.
145	</para>
146
147	<para>
148	The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
149	</para>
150	</description>
151	</bitlbee-command>
152	</bitlbee-command>
153
154	<bitlbee-command name="add">
155	<short-description>Add a buddy to your contact list</short-description>
156	<syntax>add <connection> <handle> [<nick>]</syntax>
157	<syntax>add -tmp <connection> <handle> [<nick>]</syntax>
158
159	<description>
160	<para>
161	Adds the given buddy at the specified connection to your buddy list. The account ID can be a number (see <emphasis>account list</emphasis>), the protocol name or (part of) the screenname, as long as it matches only one connection.
162	</para>
163
164	<para>
165	If you want, you can also tell BitlBee what nick to give the new contact. The -tmp option adds the buddy to the internal BitlBee structures only, not to the real contact list (like done by <emphasis>set handle_unknown add</emphasis>). This allows you to talk to people who are not in your contact list. This normally won't show you any presence notifications.
166	</para>
167	</description>
168
169	<ircexample>
170	<ircline nick="ctrlsoft">add 3 gryp@jabber.org grijp</ircline>
171	<ircaction nick="grijp" hostmask="gryp@jabber.org">has joined <emphasis>&bitlbee</emphasis></ircaction>
172	</ircexample>
173	</bitlbee-command>
174
175	<bitlbee-command name="info">
176	<short-description>Request user information</short-description>
177	<syntax>info <connection> <handle></syntax>
178	<syntax>info <nick></syntax>
179
180	<description>
181	<para>
182	Requests IM-network-specific information about the specified user. The amount of information you'll get differs per protocol. For some protocols (ATM Yahoo! and MSN) it'll give you an URL which you can visit with a normal web browser to get the information.
183	</para>
184	</description>
185
186	<ircexample>
187	<ircline nick="ctrlsoft">info 0 72696705</ircline>
188	<ircline nick="root">User info - UIN: 72696705 Nick: Lintux First/Last name: Wilmer van der Gaast E-mail: lintux@lintux.cx</ircline>
189	</ircexample>
190
191	</bitlbee-command>
192
193	<bitlbee-command name="remove">
194	<short-description>Remove a buddy from your contact list</short-description>
195	<syntax>remove <nick></syntax>
196
197	<description>
198	<para>
199	Removes the specified nick from your buddy list.
200	</para>
201	</description>
202
203	<ircexample>
204	<ircline nick="ctrlsoft">remove gryp</ircline>
205	<ircaction nick="gryp" hostmask="gryp@jabber.jabber.org">has quit <emphasis>[Leaving...]</emphasis></ircaction>
206	</ircexample>
207
208	</bitlbee-command>
209
210	<bitlbee-command name="block">
211	<short-description>Block someone</short-description>
212	<syntax>block <nick></syntax>
213	<syntax>block <connection> <handle></syntax>
214	<syntax>block <connection></syntax>
215
216	<description>
217	<para>
218	Puts the specified user on your ignore list. Either specify the user's nick when you have him/her in your contact list or a connection number and a user handle.
219	</para>
220
221	<para>
222	When called with only a connection specification as an argument, the command displays the current block list for that connection.
223	</para>
224	</description>
225	</bitlbee-command>
226
227	<bitlbee-command name="allow">
228	<short-description>Unblock someone</short-description>
229	<syntax>allow <nick></syntax>
230	<syntax>allow <connection> <handle></syntax>
231
232	<description>
233	<para>
234	Reverse of block. Unignores the specified user or user handle on specified connection.
235	</para>
236
237	<para>
238	When called with only a connection specification as an argument, the command displays the current allow list for that connection.
239	</para>
240	</description>
241	</bitlbee-command>
242
243	<bitlbee-command name="set">
244	<short-description>Miscellaneous settings</short-description>
245	<syntax>set</syntax>
246	<syntax>set <variable></syntax>
247	<syntax>set <variable> <value></syntax>
248	<syntax>set -del <variable></syntax>
249
250	<description>
251
252	<para>
253	Without any arguments, this command lists all the set variables. You can also specify a single argument, a variable name, to get that variable's value. To change this value, specify the new value as the second argument. With <emphasis>-del</emphasis> you can reset a setting to its default value.
254	</para>
255
256	<para>
257	To get more help information about a setting, try:
258	</para>
259
260	</description>
261
262	<ircexample>
263	<ircline nick="ctrlsoft">help set private</ircline>
264	</ircexample>
265
266	</bitlbee-command>
267
268	<bitlbee-command name="help">
269	<short-description>BitlBee help system</short-description>
270
271	<syntax>help [subject]</syntax>
272
273	<description>
274	<para>
275	This command gives you the help information you're reading right now. If you don't give any arguments, it'll give a short help index.
276	</para>
277	</description>
278	</bitlbee-command>
279
280	<bitlbee-command name="save">
281	<short-description>Save your account data</short-description>
282	<syntax>save</syntax>
283
284	<description>
285	<para>
286	This command saves all your nicks and accounts immediately. Handy if you have the autosave functionality disabled, or if you don't trust the program's stability... ;-)
287	</para>
288	</description>
289	</bitlbee-command>
290
291	<bitlbee-setting name="auto_connect" type="boolean" scope="both">
292	<default>true</default>
293
294	<description>
295	<para>
296	With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this.
297	</para>
298
299	<para>
300	This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_connect</emphasis> setting is disabled!)
301	</para>
302	</description>
303	</bitlbee-setting>
304
305	<bitlbee-setting name="auto_reconnect" type="boolean" scope="both">
306	<default>false</default>
307
308	<description>
309	<para>
310	If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting.
311	</para>
312
313	<para>
314	See also the <emphasis>auto_reconnect_delay</emphasis> setting.
315	</para>
316
317	<para>
318	This setting can also be changed for specific accounts using the <emphasis>account set</emphasis> command. (However, these values will be ignored if the global <emphasis>auto_reconnect</emphasis> setting is disabled!)
319	</para>
320	</description>
321	</bitlbee-setting>
322
323	<bitlbee-setting name="auto_reconnect_delay" type="integer" scope="global">
324	<default>300</default>
325
326	<description>
327	<para>
328	Tell BitlBee after how many seconds it should attempt to bring an IM-connection back up after a crash. It's not a good idea to set this value very low, it will cause too much useless traffic when an IM-server is down for a few hours.
329	</para>
330
331	<para>
332	See also the <emphasis>auto_reconnect</emphasis> setting.
333	</para>
334	</description>
335	</bitlbee-setting>
336
337	<bitlbee-setting name="away_devoice" type="boolean" scope="global">
338	<default>true</default>
339
340	<description>
341	<para>
342	With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled.
343	</para>
344	</description>
345	</bitlbee-setting>
346
347	<bitlbee-setting name="buddy_sendbuffer" type="boolean" scope="global">
348	<default>false</default>
349
350	<description>
351	<para>
352	By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data.
353	</para>
354
355	<para>
356	Using the <emphasis>buddy_sendbuffer_delay</emphasis> setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent.
357	</para>
358
359	<para>
360	Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases.
361	</para>
362	</description>
363	</bitlbee-setting>
364
365	<bitlbee-setting name="buddy_sendbuffer_delay" type="integer" scope="global">
366	<default>200</default>
367
368	<description>
369
370	<para>
371	Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds.
372	</para>
373
374	<para>
375	See also the <emphasis>buddy_sendbuffer</emphasis> setting.
376	</para>
377	</description>
378	</bitlbee-setting>
379
380	<bitlbee-setting name="charset" type="string" scope="global">
381	<default>utf-8</default>
382	<possible-values>you can get a list of all possible values by doing 'iconv -l' in a shell</possible-values>
383
384	<description>
385	<para>
386	This setting tells BitlBee what your IRC client sends and expects. It should be equal to the charset setting of your IRC client if you want to be able to send and receive non-ASCII text properly.
387	</para>
388
389	<para>
390	Most systems use UTF-8 these days. On older systems, an iso8859 charset may work better. For example, iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://www.unicodecharacter.com/charsets/iso8859.html
391	</para>
392	</description>
393
394	</bitlbee-setting>
395
396	<bitlbee-setting name="debug" type="boolean" scope="global">
397	<default>false</default>
398
399	<description>
400	<para>
401	Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee.
402	</para>
403	</description>
404	</bitlbee-setting>
405
406	<bitlbee-setting name="default_target" type="string" scope="global">
407	<default>root</default>
408	<possible-values>root, last</possible-values>
409
410	<description>
411	<para>
412	With this value set to <emphasis>root</emphasis>, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to <emphasis>last</emphasis>.
413	</para>
414	</description>
415	</bitlbee-setting>
416
417	<bitlbee-setting name="display_name" type="string" scope="account">
418	<description>
419	<para>
420	Currently only available for MSN connections. This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line.
421	</para>
422	</description>
423	</bitlbee-setting>
424
425	<bitlbee-setting name="display_namechanges" type="boolean" scope="global">
426	<default>false</default>
427
428	<description>
429	<para>
430	With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name".
431	</para>
432	</description>
433	</bitlbee-setting>
434
435	<bitlbee-setting name="handle_unknown" type="string" scope="global">
436	<default>root</default>
437	<possible-values>root, add, add_private, add_channel, ignore</possible-values>
438
439	<description>
440	<para>
441	Messages from unknown users are echoed like this by default:
442	</para>
443
444	<ircexample>
445	<ircline nick="root">Unknown message from handle 3137137:</ircline>
446	<ircline nick="root">j0000! 1 4m l33t h4x0r! kill me!</ircline>
447	</ircexample>
448
449	<para>
450	If you want this lame user to be added automatically, you can set this setting to "add". If you prefer to ignore messages from people you don't know, you can set this one to "ignore". "add_private" and "add_channel" are like add, but you can use them to make messages from unknown buddies appear in the channel instead of a query window.
451	</para>
452
453	<note>
454	<para>
455	Auto-added users aren't added to your real contact list. This is because you don't want the user to get authorization requests. So when you restart BitlBee, the auto-added user will be gone. If you want to keep the person in your buddy-list, you have to fixate the add using the <emphasis>add</emphasis> command.
456	</para>
457	</note>
458	</description>
459
460	</bitlbee-setting>
461
462	<bitlbee-setting name="lcnicks" type="boolean" scope="global">
463	<default>true</default>
464
465	<description>
466	<para>
467	Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer.
468	</para>
469	</description>
470
471	</bitlbee-setting>
472
473	<bitlbee-setting name="mail_notifications" type="boolean" scope="account">
474	<default>false</default>
475
476	<description>
477	<para>
478	Some protocols (MSN, Yahoo!) can notify via IM about new e-mail. Since most people use their Hotmail/Yahoo! addresses as a spam-box, this is disabled default. If you want these notifications, you can enable this setting.
479	</para>
480	</description>
481
482	</bitlbee-setting>
483
484	<bitlbee-setting name="ops" type="string" scope="global">
485	<default>both</default>
486	<possible-values>both, root, user, none</possible-values>
487
488	<description>
489	<para>
490	Some people prefer themself and root to have operator status in &bitlbee, other people don't. You can change these states using this setting.
491	</para>
492
493	<para>
494	The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status.
495	</para>
496	</description>
497	</bitlbee-setting>
498
499	<bitlbee-setting name="password" type="string" scope="both">
500	<description>
501	<para>
502	Use this global setting to change your "NickServ" password.
503	</para>
504
505	<para>
506	This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service.
507	</para>
508
509	<para>
510	Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text.
511	</para>
512	</description>
513	</bitlbee-setting>
514
515	<bitlbee-setting name="port" type="integer" scope="account">
516	<description>
517	<para>
518	Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections.
519	</para>
520	</description>
521	</bitlbee-setting>
522
523	<bitlbee-setting name="priority" type="integer" scope="account">
524	<default>0</default>
525
526	<description>
527	<para>
528	Can be set for Jabber connections. When connecting to one account from multiple places, this priority value will help the server to determine where to deliver incoming messages (that aren't addressed to a specific resource already).
529	</para>
530
531	<para>
532	According to RFC 3921 servers will always deliver messages to the server with the highest priority value. Mmessages will not be delivered to resources with a negative priority setting (and should be saved as an off-line message if all available resources have a negative priority value).
533	</para>
534	</description>
535	</bitlbee-setting>
536
537	<bitlbee-setting name="private" type="boolean" scope="global">
538	<default>true</default>
539
540	<description>
541	<para>
542	If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel.
543	</para>
544
545	<para>
546	This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect.
547	</para>
548	</description>
549	</bitlbee-setting>
550
551	<bitlbee-setting name="query_order" type="string" scope="global">
552	<default>lifo</default>
553	<possible-values>lifo, fifo</possible-values>
554
555	<description>
556	<para>
557	This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to <emphasis>lifo</emphasis>, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to <emphasis>fifo</emphasis>, BitlBee displays the first question which comes in and caches all the others until you answer the first one.
558	</para>
559
560	<para>
561	Although the <emphasis>fifo</emphasis> setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones).
562	</para>
563	</description>
564	</bitlbee-setting>
565
566	<bitlbee-setting name="resource" type="string" scope="account">
567	<default>BitlBee</default>
568
569	<description>
570	<para>
571	Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string.
572	</para>
573	</description>
574	</bitlbee-setting>
575
576	<bitlbee-setting name="resource_select" type="string" scope="account">
577	<default>priority</default>
578	<possible-values>priority, time</possible-values>
579
580	<description>
581	<para>
582	Because the IRC interface makes it pretty hard to specify the resource to talk to (when a buddy is online through different resources), this setting was added.
583	</para>
584
585	<para>
586	Normally it's set to <emphasis>priority</emphasis> which means messages will always be delivered to the buddy's resource with the highest priority. If the setting is set to <emphasis>time</emphasis>, messages will be delivered to the resource that was last used to send you a message (or the resource that most recently connected).
587	</para>
588	</description>
589	</bitlbee-setting>
590
591	<bitlbee-setting name="save_on_quit" type="boolean" scope="global">
592	<default>true</default>
593
594	<description>
595	<para>
596	If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore.
597	</para>
598	</description>
599	</bitlbee-setting>
600
601	<bitlbee-setting name="server" type="string" scope="account">
602	<description>
603	<para>
604	Can be set for Jabber- and OSCAR-connections. For Jabber, you might have to set this if the servername isn't equal to the part after the @ in the Jabber handle. For OSCAR this shouldn't be necessary anymore in recent BitlBee versions.
605	</para>
606	</description>
607	</bitlbee-setting>
608
609	<bitlbee-setting name="simulate_netsplit" type="boolean" scope="global">
610	<default>true</default>
611
612	<description>
613	<para>
614	Some IRC clients parse quit messages sent by the IRC server to see if someone really left or just disappeared because of a netsplit. By default, BitlBee tries to simulate netsplit-like quit messages to keep the control channel window clean. If you don't like this (or if your IRC client doesn't support this) you can disable this setting.
615	</para>
616	</description>
617	</bitlbee-setting>
618
619	<bitlbee-setting name="ssl" type="boolean" scope="account">
620	<default>false</default>
621
622	<description>
623	<para>
624	Currently only available for Jabber connections. Set this to true if the server accepts SSL connections.
625	</para>
626	</description>
627	</bitlbee-setting>
628
629	<bitlbee-setting name="strip_html" type="boolean" scope="global">
630	<default>true</default>
631
632	<description>
633	<para>
634	Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML.
635	</para>
636	<para>
637	If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to <emphasis>always</emphasis>, but this might sometimes accidentally strip non-HTML things too.
638	</para>
639	</description>
640	</bitlbee-setting>
641
642	<bitlbee-setting name="tls" type="boolean" scope="account">
643	<default>try</default>
644
645	<description>
646	<para>
647	Newer Jabber servers allow clients to convert a plain-text session to a TLS/SSL-encrypted session. Normally (with this setting set to <emphasis>try</emphasis>) BitlBee will do this, if possible.
648	</para>
649
650	<para>
651	If you want to force BitlBee to use TLS sessions only (and to give up if that doesn't seem to be possible) you can set this setting to <emphasis>true</emphasis>. Set it to <emphasis>false</emphasis> if you want the session to remain plain-text.
652	</para>
653	</description>
654	</bitlbee-setting>
655
656	<bitlbee-setting name="to_char" type="string" scope="global">
657	<default>": "</default>
658
659	<description>
660	<para>
661	It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using <emphasis>set to_char</emphasis>.
662	</para>
663
664	<para>
665	Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable.
666	</para>
667	</description>
668	</bitlbee-setting>
669
670	<bitlbee-setting name="typing_notice" type="boolean" scope="global">
671	<default>false</default>
672
673	<description>
674	<para>
675	Sends you a /notice when a user starts typing a message (if supported by the IM protocol and the user's client). To use this, you most likely want to use a script in your IRC client to show this information in a more sensible way.
676	</para>
677	</description>
678	</bitlbee-setting>
679
680	<bitlbee-setting name="web_aware" type="string" scope="account">
681	<default>false</default>
682
683	<description>
684	<para>
685	ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default.
686	</para>
687
688	<para>
689	Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled.
690	</para>
691	</description>
692	</bitlbee-setting>
693
694	<bitlbee-setting name="xmlconsole" type="boolean" scope="account">
695	<default>false</default>
696
697	<description>
698	<para>
699	The Jabber module allows you to add a buddy <emphasis>xmlconsole</emphasis> to your contact list, which will then show you the raw XMPP stream between you and the server. You can also send XMPP packets to this buddy, which will then be sent to the server.
700	</para>
701	<para>
702	If you want to enable this XML console permanently (and at login time already), you can set this setting.
703	</para>
704	</description>
705	</bitlbee-setting>
706
707	<bitlbee-command name="rename">
708	<short-description>Rename (renick) a buddy</short-description>
709	<syntax>rename <oldnick> <newnick></syntax>
710
711	<description>
712	<para>
713	Renick a user in your buddy list. Very useful, in fact just very important, if you got a lot of people with stupid account names (or hard ICQ numbers).
714	</para>
715	</description>
716
717	<ircexample>
718	<ircline nick="itsme">rename itsme_ you</ircline>
719	<ircaction nick="itsme_">is now known as <emphasis>you</emphasis></ircaction>
720	</ircexample>
721
722	</bitlbee-command>
723
724	<bitlbee-command name="yes">
725	<short-description>Accept a request</short-description>
726	<syntax>yes [<number>]</syntax>
727
728	<description>
729	<para>
730	Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To accept a question, use the <emphasis>yes</emphasis> command.
731	</para>
732
733	<para>
734	By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
735	</para>
736	</description>
737
738	</bitlbee-command>
739
740	<bitlbee-command name="no">
741	<short-description>Deny a request</short-description>
742	<syntax>no [<number>]</syntax>
743
744	<description>
745	<para>
746	Sometimes an IM-module might want to ask you a question. (Accept this user as your buddy or not?) To reject a question, use the <emphasis>no</emphasis> command.
747	</para>
748
749	<para>
750	By default, this answers the first unanswered question. You can also specify a different question as an argument. You can use the <emphasis>qlist</emphasis> command for a list of questions.
751	</para>
752	</description>
753	</bitlbee-command>
754
755	<bitlbee-command name="qlist">
756	<short-description>List all the unanswered questions root asked</short-description>
757	<syntax>qlist</syntax>
758
759	<description>
760	<para>
761	This gives you a list of all the unanswered questions from root.
762	</para>
763	</description>
764
765	</bitlbee-command>
766
767	<bitlbee-command name="register">
768	<short-description>Register yourself</short-description>
769	<syntax>register <password></syntax>
770
771	<description>
772	<para>
773	BitlBee can save your settings so you won't have to enter all your IM passwords every time you log in. If you want the Bee to save your settings, use the <emphasis>register</emphasis> command.
774	</para>
775
776	<para>
777	Please do pick a secure password, don't just use your nick as your password. Please note that IRC is not an encrypted protocol, so the passwords still go over the network in plaintext. Evil people with evil sniffers will read it all. (So don't use your root password.. ;-)
778	</para>
779
780	<para>
781	To identify yourself in later sessions, you can use the <emphasis>identify</emphasis> command. To change your password later, you can use the <emphasis>set password</emphasis> command.
782	</para>
783	</description>
784
785	</bitlbee-command>
786
787	<bitlbee-command name="identify">
788	<syntax>identify <password></syntax>
789	<short-description>Identify yourself with your password</short-description>
790
791	<description>
792	<para>
793	BitlBee saves all your settings (contacts, accounts, passwords) on-server. To prevent other users from just logging in as you and getting this information, you'll have to identify yourself with your password. You can register this password using the <emphasis>register</emphasis> command.
794	</para>
795
796	<para>
797	Once you're registered, you can change your password using <emphasis>set password <password></emphasis>.
798	</para>
799	</description>
800	</bitlbee-command>
801
802	<bitlbee-command name="drop">
803	<syntax>drop <password></syntax>
804	<short-description>Drop your account</short-description>
805
806	<description>
807	<para>
808	Drop your BitlBee registration. Your account files will be removed and your password will be forgotten. For obvious security reasons, you have to specify your NickServ password to make this command work.
809	</para>
810	</description>
811	</bitlbee-command>
812
813	<bitlbee-command name="blist">
814	<syntax>blist [all\|online\|offline\|away]</syntax>
815	<short-description>List all the buddies in your contact list</short-description>
816
817	<description>
818	<para>
819	You can get a better readable buddy list using the <emphasis>blist</emphasis> command. If you want a complete list (including the offline users) you can use the <emphasis>all</emphasis> argument.
820	</para>
821	</description>
822
823	</bitlbee-command>
824
825	<bitlbee-command name="nick">
826	<short-description>Change friendly name, nick</short-description>
827	<syntax>nick <connection> [<new nick>]</syntax>
828	<syntax>nick <connection></syntax>
829
830	<description>
831	<para>
832	Deprecated: Use the per-account <emphasis>display_name</emphasis> setting to read and change this information.
833	</para>
834	</description>
835
836	<ircexample>
837	<ircline nick="wouter">account set 1/display_name "The majestik møøse"</ircline>
838	<ircline nick="root">display_name = `The majestik møøse'</ircline>
839	</ircexample>
840
841	</bitlbee-command>
842
843	<bitlbee-command name="join_chat">
844	<short-description>Join a named groupchat/conference room</short-description>
845	<syntax>join_chat <connection> <room name> [<channel name>] [<room nickname>] [<password>]</syntax>
846
847	<description>
848	<para>
849	On most IM-networks groupchats can be started using the /join command. (<emphasis>/join #foo</emphasis> to start a chatroom with you and <emphasis>foo</emphasis>) This doesn't work with names groupchats though (which exist on Jabber networks and AIM, for example), instead you can use this command.
850	</para>
851
852	<para>
853	The first two arguments are required. <emphasis>room name</emphasis> is the name of the chatroom on the IM-network. <emphasis>channel name</emphasis> is the IRC channel name BitlBee should map this to. <emphasis>room nickname</emphasis> is the nickname you want to have in this channel. If you don't give these options, BitlBee will do the right guesses.
854	</para>
855
856	<para>
857	The following command will join you to the chatroom called <emphasis>bitlbee@conference.bitlbee.org</emphasis>. The channel will be called <emphasis>&bitlbee-help</emphasis> because <emphasis>&bitlbee</emphasis> will already be in use. Your nickname will be <emphasis>help-me</emphasis>.
858	</para>
859	</description>
860
861	<ircexample>
862	<ircline nick="wilmer">join_chat jabber bitlbee@conference.bitlbee.org &bitlbee-help help-me</ircline>
863	</ircexample>
864
865	</bitlbee-command>
866	</chapter>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: